Experimental study of quantum dot and dash lasers

Quantum dashes are elongated quantum dots. Polarized edge-photovoltage and spontaneous emission spectroscopy are used to study the anisotropy of optical properties in 1.5μm InGaAsP and AlGaInAs-based quantum dash lasers. Strain, which causes TM-polarized transitions to be suppressed at the band edge, coupled with carrier confinement and dash shape leads to an enhancement of the optical properties for light polarized along the dash long axis, in excellent agreement with theoretical results. An analysis of the integrated facet and spontaneous emission rate with total current and temperature reveals that, in both undoped and p-doped InGaAsP-based quantum dash lasers at room temperature, the threshold current and its temperature dependence remain dominated by Auger recombination. We also identify two processes which can limit the output power and propose that the effects of the dopant in p-doped InGaAsP-based lasers dominate at low temperature but decrease with increasing temperature. A high threshold current density in undoped AlGaInAs-based quantum dash laser samples studied, which degrade rapidly at low temperature, is not due to intrinsic carrier recombination processes. 1.3μm GaAs-based quantum dots lasers have been widely studied, but there remains issues as to the nature of the electronic structure. Polarized edge-photovoltage spectroscopy is used to investigate the energy distribution and nature of the energy states in InAs/GaAs quantum dot material. A non-negligible TM-polarized transition, which is often neglected in calculations and analyses, is measured close to the main TE-polarized ground state transition. Theory is in very good agreement with the experimental results and indicates that the measured low-energy TM-polarized transition is due to the strong spatial overlap between the ground state electron and the light-hole component of a low-lying excited hole state. Further calculations suggest that the TM-polarized transition reduces at the band edge as the quantum dot aspect ratio decreases.

Novel roles for the GABAB receptor in anxiety and cocaine addiction

The GABAB receptor has been postulated as a possible drug target in the treatment of anxiety disorders and cocaine addiction. Indeed, a wealth of preclinical data is emerging that has shown that mice lacking functional GABAB receptors display a highly anxious behaviour across a range of behavioural models of anxiety. Additionally, novel compounds that act by altering the allosteric conformation of the GABAB receptor to a more active state; the GABAB receptor positive modulators, have been repeatedly demonstrated to have anxiolytic effects in animals. In addition to being a putative anxiolytic drug target, the GABAB receptor has been identified as a novel target for antiaddictive therapies. Indeed GABAB receptor positive modulators have been demonstrated to have anti-addictive properties across a broad variety of behavioural paradigms. Despite these findings, several gaps in our knowledge of the role played by the GABAB receptor in both anxiety and drug abuse disorder exist. The aim of this thesis was to use preclinical animal models in an effort to further probe the role played by the GABAB receptor in anxiety and addiction. Our studies initially examined the role played by the GABAB receptor in the neurodevelopmental processes underpinning of anxiety. Our studies demonstrated that treating mouse pups in early life with the GABAB receptor agonist baclofen produced an anxious phenotype in adult life, whereas treatment with the GABAB receptor antagonist CGP52432 produced no effects on adult behaviour. Further to this, we examined whether the anxious behaviour induced by early life blockade of the serotonin reuptake transporter was dependant on alterations in GABAB receptor function. Our studies however revealed no effect of early life selective serotonin reuptake inhibitor treatment on adult life baclofen sensitivity. The next issue addressed in this thesis is the characterization of the effects of a GABAB receptor positive modulator and a GABAB receptor antagonist in a behavioural model of conditioned fear behaviour. These novel classes of GABAB receptor ligands have been considerably less well characterized in this facet of preclinical anxiety behaviour than in terms of innate anxiety behaviour. Our study however revealed that the GABAB receptor positive modulator GS39783 and the GABAB receptor antagonist CGP52432 were without effect on the acquisition, expression or extinction of conditioned fear in our model. The next element of this thesis dealt with the characterization of a novel mouse model, the GABAB(2)- S892A mouse. This mouse has been engineered to express a form of the GABAB(2) receptor subunit wherein the function determining serine phosphorylation site cannot be phosphorylated. We initially tested this mouse in terms of its GABAB receptor function in adult life, followed by testing it in a battery of tests of unconditioned and learned anxiety behaviour. We also examined the behavioural and molecular responses of the GABAB(2)-S892A mouse to cocaine. All of our studies appear to show that the GABAB(2)-S892A mouse is indistinguishable from wildtype controls. The final aim of the thesis was to investigate the behavioural and molecular sensitivity of the GABAB(1) subunit isoform null mice, the GABAB(1a) -/- and GABAB(1b) -/- mice to cocaine. Our studies revealed that these mice display differing behavioural responses to cocaine, with the GABAB(1a) -/- mouse displaying a hypersensitivity to the acute locomotor effects of cocaine, while the GABAB(1b) -/- displayed blunted locomotor sensitisation to cocaine.

A social history of sport in Cork, Tipperary and Waterford, c. 1880-1930

This thesis seeks to explore the development of sport in Munster in the late nineteenth and early twentieth centuries by comparing developments in three counties: Cork, Tipperary and Waterford. In particular this thesis considers the development of rugby and soccer in comparative perspective across these three counties, asking what local factors impacted on their uneven development in the region and considering the extent to which the traditional model of diffusion applies to the reception of these sports in the three counties. By giving consideration to these two particular non-indigenous sports, the thesis will, through answering that question, explore ideas of cultural reception, national identity and class as expressed at local level. These themes will be explored by placing the comparative analysis of these two sports into a wider context of sporting development regionally and nationally in the period, in particular the emerging commercialisation of sport, and also the diverse sporting culture of which these two sports were a part. Utilising a wide range of archival sources from local, national and sporting newspapers, to club records, official publications and ephemera this thesis builds a picture of sport in Munster that is deeply rooted in the community, and that forms an important facet of the social world of Cork, Tipperary and Waterford from 1880-1930.

Photonic integrated circuit for the manipulation of coherent optical combs

Photonic integration has become an important research topic in research for applications in the telecommunications industry. Current optical internet infrastructure has reached capacity with current generation dense wavelength division multiplexing (DWDM) systems fully occupying the low absorption region of optical fibre from 1530 nm to 1625 nm (the C and L bands). This is both due to an increase in the number of users worldwide and existing users demanding more bandwidth. Therefore, current research is focussed on using the available telecommunication spectrum more efficiently. To this end, coherent communication systems are being developed. Advanced coherent modulation schemes can be quite complex in terms of the number and array of devices required for implementation. In order to make these systems viable both logistically and commercially, photonic integration is required. In traditional DWDM systems, arrayed waveguide gratings (AWG) are used to both multiplex and demultiplex the multi-wavelength signal involved. AWGs are used widely as they allow filtering of the many DWDM wavelengths simultaneously. However, when moving to coherent telecommunication systems such as coherent optical frequency division multiplexing (OFDM) smaller FSR ranges are required from the AWG. This increases the size of the device which is counter to the miniaturisation which integration is trying to achieve. Much work was done with active filters during the 1980s. This involved using a laser device (usually below threshold) to allow selective wavelength filtering of input signals. By using more complicated cavity geometry devices such as distributed feedback (DFB) and sampled grating distributed Bragg gratings (SG-DBR) narrowband filtering is achievable with high suppression (>30 dB) of spurious wavelengths. The active nature of the devices also means that, through carrier injection, the index can be altered resulting in tunability of the filter. Used above threshold, active filters become useful in filtering coherent combs. Through injection locking, the coherence of the filtered wavelengths with the original comb source is retained. This gives active filters potential application in coherent communication system as demultiplexers. This work will focus on the use of slotted Fabry-Pérot (SFP) semiconductor lasers as active filters. Experiments were carried out to ensure that SFP lasers were useful as tunable active filters. In all experiments in this work the SFP lasers were operated above threshold and so injection locking was the mechanic by which the filters operated. Performance of the lasers under injection locking was examined using both single wavelength and coherent comb injection. In another experiment two discrete SFP lasers were used simultaneously to demultiplex a two-line coherent comb. The relative coherence of the comb lines was retained after demultiplexing. After showing that SFP lasers could be used to successfully demultiplex coherent combs a photonic integrated circuit was designed and fabricated. This involved monolithic integration of a MMI power splitter with an array of single facet SFP lasers. This device was tested much in the same way as the discrete devices. The integrated device was used to successfully demultiplex a two line coherent comb signal whilst retaining the relative coherence between the filtered comb lines. A series of modelling systems were then employed in order to understand the resonance characteristics of the fabricated devices, and to understand their performance under injection locking. Using this information, alterations to the SFP laser designs were made which were theoretically shown to provide improved performance and suitability for use in filtering coherent comb signals.

Quantum chemical study of the effect of precursor stereochemistry on dissociative chemisorption and surface redox reactions during the atomic layer deposition of the transition metal copper

Using quantum chemical calculations, we investigate surface reactions of copper precursors and diethylzinc as the reducing agent for effective Atomic Layer Deposition (ALD) of Cu. The adsorption of various commonly used Cu(II) precursors is explored. The precursors vary in the electronegativity and conjugation of the ligands and flexibility of the whole molecule. Our study shows that the overall stereochemistry of the precursor governs the adsorption onto its surface. Formation of different Cu(II)/Cu(I)/Cu(0) intermediate complexes from the respective Cu(II) compounds on the surface is also explored. The surface model is a (111) facet of a Cu55 cluster. Cu(I) compounds are found to cover the surface after the precursor pulse, irrespective of the precursor chosen. We provide new information about the surface chemistry of Cu(II) versus Cu(I) compounds. A pair of CuEt intermediates or the dimer Cu2Et2 reacts in order to deposit a new Cu atom and release gaseous butane. In this reaction, two electrons from the Et anions are donated to copper for reduction to metallic form. This indicates that a ligand exchange between the Cu and Zn is important for the success of this transmetalation reaction. The effect of the ligands in the precursor on the electron density before and after adsorption onto the surface has also been computed through population analysis. In the Cu(I) intermediate, charge is delocalized between the Cu precursor and the bare copper surface, indicating metallic bonding as the precursor densifies to the surface.

The ‘Celtic’ dimension of pre-first World War religious discourse in Britain: Wellesley Tudor Pole and the Glastonbury phenomenon

This article will explore the contribution made to the construction of discourse around religion outside of mainstream Christianity, at the turn of the twentieth century in Britain, by a Celticist movement as represented by Wellesley Tudor Pole (d.1968) and his connection to the Glastonbury phenomenon. I will detail the interconnectedness of individuals and movements occupying this discursive space and their interest in efforts to verify the authenticity of an artefact which Tudor Pole claimed was once in the possession of Jesus. Engagement with Tudor Pole’s quest to prove the provenance of the artefact, and his contention that a pre-Christian culture had existed in Ireland which had extended itself to Glastonbury and Iona creating the foundation for an authentic Western mystical tradition, is presented as one facet of a broader, contemporary discourse on alternative ideas and philosophies. In conclusion, I will juxtapose Tudor Pole’s fascination with Celtic origins and the approach of leading figures in the ‘Celtic Revival’ in Ireland, suggesting intersections and alterity in the construction of their worldview. The paper forms part of a chapter in a thesis under-preparation which examines the construction of discourse on religion outside of mainstream Christianity at the turn of the twentieth century, and in particular the role played by visiting religious reformers from Asia. The aim is to recover the (mostly forgotten) history of these engagements.

Less strain, more gain_nano_patterning III-N thin films

Controlling the growth mechanism for nano-structures is one of the most critical topics in material science. In the past 10 years there has been intensive research worldwide in IIIN based nanowires for its many unique photonic and electrical properties at this scale. There are several advantages to nanostructuring III-N materials, including increased light extraction, increased device efficiency, reduction of efficiency droop, and reduction in crystallographic defect density. High defect densities that normally plague III-N materials and reduce the device efficiency are not an issue for nano-structured devices such as LEDs, due to the effective strain relaxation. Additionally regions of the light spectrum such as green and yellow, once found difficult to achieve in bulk planar LEDs, can be produced by manipulating the confinement and crystal facet growth directions of the active regions. A cheap and easily repeatable self-assembly nano-patterning technique at wafer scale was designed during this thesis for top down production of III-N nanowires. Through annealing under ammonia and N2 gas flow, the first reported dislocation defect bending was observed in III-N nanorods by in-situ transmission electron microscopy heating. By growing on these etched top down nanorods as a template, ultra-dense nanowires with apex tipped semi-polar tops were produced. The uniform spacing of 5nm between each wire is the highest reported space-filling factor at 98%. Finally by using these ultra-dense nanorods bridging the green gap of the light spectrum was possible, producing the first reported red, yellow, green light emission from a single nano-tip.

Ribosomal frameshifting and transcriptional slippage: from genetic steganography and cryptography to adventitious use

Genetic decoding is not ‘frozen’ as was earlier thought, but dynamic. One facet of this is frameshifting that often results in synthesis of a C-terminal region encoded by a new frame. Ribosomal frameshifting is utilized for the synthesis of additional products, for regulatory purposes and for translational ‘correction’ of problem or ‘savior’ indels. Utilization for synthesis of additional products occurs prominently in the decoding of mobile chromosomal element and viral genomes. One class of regulatory frameshifting of stable chromosomal genes governs cellular polyamine levels from yeasts to humans. In many cases of productively utilized frameshifting, the proportion of ribosomes that frameshift at a shift-prone site is enhanced by specific nascent peptide or mRNA context features. Such mRNA signals, which can be 5′ or 3′ of the shift site or both, can act by pairing with ribosomal RNA or as stem loops or pseudoknots even with one component being 4 kb 3′ from the shift site. Transcriptional realignment at slippage-prone sequences also generates productively utilized products encoded trans-frame with respect to the genomic sequence. This too can be enhanced by nucleic acid structure. Together with dynamic codon redefinition, frameshifting is one of the forms of recoding that enriches gene expression.