Pretty good governance: balancing policy drivers and stakeholder interests in developing fisheries ecosystem plans

The central research question that this thesis addresses is whether there is a significant gap between fishery stakeholder values and the principles and policy goals implicit in an Ecosystem Approach to Fisheries Management (EAFM). The implications of such a gap for fisheries governance are explored. Furthermore an assessment is made of what may be practically achievable in the implementation of an EAFM in fisheries in general and in a case study fishery in particular. The research was mainly focused on a particular case study, the Celtic Sea Herring fishery and its management committee, the Celtic Sea Herring Management Advisory Committee (CSHMAC). The Celtic Sea Herring fishery exhibits many aspects of an EAFM and the fish stock has successfully recovered to healthy levels in the past 5 years. However there are increasing levels of governance related conflict within the fishery which threaten the future sustainability of the stock. Previous research on EAFM governance has tended to focus either on higher levels of EAFM governance or on individual behaviour but very little research has attempted to link the two spheres or explore the relationship between them. Two main themes within this study aimed to address this gap. The first was what role governance could play in facilitating EAFM implementation. The second theme concerned the degree of convergence between high-level EAFM goals and stakeholder values. The first method applied was governance benchmarking to analyse systemic risks to EAFM implementation. This found that there are no real EU or national level policies which provide stakeholders or managers with clear targets for EAFM implementation. The second method applied was the use of cognitive mapping to explore stakeholders understandings of the main ecological, economic and institutional driving forces in the Celtic Sea Herring fishery. The main finding from this was that a long-term outlook can and has been incentivised through a combination of policy drivers and participatory management. However the fundamental principle of EAFM, accounting for ecosystem linkages rather than target stocks was not reflected in stakeholders cognitive maps. This was confirmed in a prioritisation of stakeholders management priorities using Analytic Hierarchy Process which found that the overriding concern is for protection of target stock status but that wider ecosystem health was not a priority for most management participants. The conclusion reached is that moving to sustainable fisheries may be a more complex process than envisioned in much of the literature and may consist of two phases. The first phase is a transition to a long-term but still target stock focused approach. This achievable transition is mainly a strategic change, which can be incentivised by policies and supported by stakeholders. In the Celtic Sea Herring fishery, and an increasing number of global and European fisheries, such transitions have contributed to successful stock recoveries. The second phase however, implementation of an ecosystem approach, may present a greater challenge in terms of governability, as this research highlights some fundamental conflicts between stakeholder perceptions and values and those inherent in an EAFM. This phase may involve the setting aside of fish for non-valued ecosystem elements and will require either a pronounced mind-set and value change or some strong top-down policy incentives in order to succeed. Fisheries governance frameworks will need to carefully explore the most effective balance between such endogenous and exogenous solutions. This finding of low prioritisation of wider ecosystem elements has implications for rights based management within an ecosystem approach, regardless of whether those rights are individual or collective.

Two closely coupled lasers, dynamics & applications

The dynamics of two mutually coupled identical single-mode semi-conductor lasers are theoretically investigated. For small separation and large coupling between the lasers, symmetry-broken one-colour states are shown to be stable. In this case the light output of the lasers have significantly different intensities whilst at the same time the lasers are locked to a single common frequency. For intermediate coupling we observe stable two-colour states, where both single-mode lasers lase simultaneously at two optical frequencies which are separated by up to 150 GHz. For low coupling but possibly large separation, the frequency of the relaxation oscillations of the freerunning lasers defines the dynamics. Chaotic and quasi-periodic states are identified and shown to be stable. For weak coupling undamped relaxation oscillations dominate where each laser is locked to three or more odd number of colours spaced by the relaxation oscillation frequency. It is shown that the instabilities that lead to these states are directly connected to the two colour mechanism where the change in the number of optical colours due to a change in the plane of oscillation. At initial coupling, in-phase and anti-phase one colour states are shown to emerge from “on” uncoupled lasers using a perturbation method. Similarly symmetry-broken one-colour states come from considering one free-running laser initially “on” and the other laser initially “off”. The mechanism that leads to a bi-stability between in-phase and anti-phase one-colour states is understood. Due to an equivariant phase space symmetry of being able to exchange the identical lasers, a symmetric and symmetry-broken variant of all states mentioned above exists and is shown to be stable. Using a five dimensional model we identify the bifurcation structure which is responsible for the appearance of symmetric and symmetry-broken one-colour, symmetric and symmetry-broken two-colour, symmetric and symmetry-broken undamped relaxation oscillations, symmetric and symmetry-broken quasi-periodic, and symmetric and symmetry-broken chaotic states. As symmetry-broken states always exist in pairs, they naturally give rise to bi-stability. Several of these states show multistabilities between symmetric and symmetry-broken variants and among states. Three memory elements on the basis of bi-stabilities in one and two colour states for two coupled single-mode lasers are proposed. The switching performance of selected designs of optical memory elements is studied numerically.

Polymer and metallodielectric based photonic crystals

The bottom-up colloidal synthesis of photonic crystals has attracted interest over top-down approaches due to their relatively simplicity, the potential to produce large areas, and the low-costs with this approach in fabricating complex 3-dimensional structures. This thesis focuses on the bottom-up approach in the fabrication of polymeric colloidal photonic crystals and their subsequent modification. Poly(methyl methacrylate) sub-micron spheres were used to produce opals, inverse opals and 3D metallodielectric photonic crystal (MDPC) structures. The fabrication of MDPCs with Au nanoparticles attached to the PMMA spheres core–shell particles is described. Various alternative procedures for the fabrication of photonic crystals and MDPCs are described and preliminary results on the use of an Au-based MDPC for surface-enhanced Raman scattering (SERS) are presented. These preliminary results suggest a threefold increase of the Raman signal with the MDPC as compared to PMMA photonic crystals. The fabrication of PMMA-gold and PMMA-nickel MDPC structures via an optimised electrodeposition process is described. This process results in the formation of a continuous dielectric-metal interface throughout a 3D inverted photonic crystal structure, which are shown to possess interesting optical properties. The fabrication of a robust 3D silica inverted structure with embedded Au nanoparticles is described by a novel co-crystallisation method which is capable of creating a SiO2/Au NP composite structure in a single step process. Although this work focuses on the creation of photonic crystals, this co-crystallisation approach has potential for the creation of other functional materials. A method for the fabrication of inverted opals containing silicon nanoparticles using aerosol assisted chemical vapour deposition is described. Silicon is a high dielectric material and nanoparticles of silicon can improve the band gap and absorption properties of the resulting structure, and therefore have the potential to be exploited in photovoltaics.

Formation and characterisation of ordered porous vanadium oxide inverse opal materials for Li-ion batteries

This thesis presents several routes towards achieving artificial opal templates by colloidal self-assembly of polystyrene (PS) or poly(methyl methacrylate) (PMMA) spheres and the use of these template for the fabrication of V2O5 inverse opals as cathode materials for lithium ion battery applications. First, through the manipulation of different experimental factors, several methods of affecting or directing opal growth towards realizing different structures, improving order and/or achieving faster formation on a variety of substrates are presented. The addition of the surfactant sodium dodecyl sulphate (SDS) at a concentration above the critical micelle concentration for SDS to a 5 wt% solution of PMMA spheres before dip-coating is presented as a method of achieving ordered 2D PhC monolayers on hydrophobic Au-coated silicon substrates at fast and slow rates of withdrawal. The effect that the degree of hydrophilicity of glass substrates has on the ordering of PMMA spheres is next investigated for a slow rate of withdrawal under noise agitation. Heating of the colloidal solution is also presented as a means of affecting order and thickness of opal deposits formed using fast rate dip coating. E-beam patterned substrates are shown as a means of altering the thermodynamically favoured FCC ordering of polystyrene spheres (PS) when dip coated at slow rate. Facile routes toward the synthesis of ordered V2O5 inverse opals are presented with direct infiltration of polymer sphere templates using liquid precursor. The use of different opal templates, both 2D and 3D partially ordered templates, is compared and the composition and arrangement of the subsequent IO structures post infiltration and calcination for various procedures is characterised. V2O5 IOs are also synthesised by electrodeposition from an aqueous VOSO4 solution at constant voltage. Electrochemical characterisation of these structures as cathode material for Li-ion batteries is assessed in a half cell arrangement for samples deposited on stainless steel foil substrates. Improved rate capabilities are demonstrated for these materials over bulk V2O5, with the improvement attributed to the shorter Li ion diffusion distances and increased electrolyte infiltration provided by the IO structure.

The student bullying of teachers in Irish second level schools: exploring the influence of historical low state intervention in education on the development of contemporary policy responses in Ireland

The student bullying of teachers (SBT) is a distinct and complex form of bullying with a multiplicity of diverse, changeable and intersecting causes which is experienced by and affects teachers in a variety of ways. SBT is both a national and an international phenomenon which is under-recognised in academic, societal and political spheres, resulting in limited conceptual understanding and awareness of the issue. This study explores teachers’ experiences of SBT behaviours in Irish second level schools as well as teachers’ perceptions regarding training, policies and supports in Ireland to address the issue. Specifically, the study seeks to explore the influence of historical low State intervention in education on contemporary policies and supports to deal with SBT in Ireland. A mixed methods approach involving a survey of 531 second level school teachers and 17 semi-structured interviews with teachers, Year Heads and representatives from teacher trade unions and school management bodies was employed to collect and analyse data. Findings indicate that SBT behaviours are prevalent in many forms in Irish second level schools. The hidden nature of the phenomenon has simultaneously contributed to and is reinforced by limited understanding of the issue as well as teachers’ reluctance to disclose their experiences. Findings reveal that teachers perceive the contemporary policies, training and support structures in Ireland to be inadequate in equipping them to effectively deal with SBT. State intervention in addressing SBT behaviours to date, has been limited, therefore many teachers are forced to respond to the issue based on their own initiatives and assumptions rather than from an informed critically reflective approach, supported by national guidelines and sufficient State investment. This has resulted in a piecemeal, un-coordinated and ad-hoc approach to SBT in Irish schools both in terms of teachers’ management of SBT behaviours and with respect to the supports extended to staff. The potential negative consequences of SBT behaviours on teachers’ wellbeing and professional performance and thus, on the education system itself, underlines the need for a strategic, evidence-based, resourced and integrated approach which includes, as a pivotal component, consultation with teachers, whose contribution to the process is crucial.

Langmuir-Blodgett assembly of colloidal crystals combined with controlled infiltration of conducting metal oxides

Colloidal photonic crystals (PhCs) possess a periodic dielectric structure which gives rise to a photonic band gap (PBG) and offer great potential in the ability to modify or control light at visible wavelengths. Although the refractive index contrast between the void or infill and the matrix material is paramount for photonics applications, integration into real optoelectronics devices will require a range of added functionalities such as conductivity. As such, colloidal PhCs can be used as templates to direct infiltration of other functional materials using a range of deposition strategies. The work in this thesis seeks to address two challenges; first to develop a reproducible strategy based on Langmuir-Blodgett (LB) deposition to assemble high quality colloidal PhCs based on silica with precise film thickness as most other assembly methods suffer from a lack of reproducibility thickness control. The second is to investigate the use of LBdeposited colloidal PhCs as templates for infiltration with conducting metal oxide materials using vapor phase deposition techniques. Part of this work describes the synthesis and assembly of colloidal silica spheres with different surface chemical functionalities at the air-water interface in preparation for LB deposition. Modification of surface funtionality conferred varying levels of hydrophobicity upon the particles. The behaviour of silica monolayer films at the air-water interface was characterised by Brewster Angle Microscopy and surface pressure isotherms with a view to optimising the parameters for LB deposition of multilayer colloidal PhC films. Optical characterisation of LB-fabricated colloidal PhCs indicated high quality photonic behaviour, exhibiting a pseudo PBG with a sharp Bragg diffraction peak in the visible region and reflectance intensities greater than 60%. Finally the atomic layer deposition (ALD) of nominally undoped ZnO and aluminium “doped” ZnO (Al-doped ZnO) inside the pores of a colloidal PhC assembled by the LB technique was carried out. ALD growth in this study was performed using trimethyl aluminium (TMA) and water as precursors for the alumina and diethyl zinc (DEZn) and water for the ZnO. The ZnO:Al films were grown in a laminate mode, where DEZn pulses were substituted for TMA pulses in the sequences with a Zn:Al ratio 19:1. The ALD growth of ZnO and ZnO:Al in colloidal PhCs was shown to be highly conformal, tuneable and reproducible whilst maintaining excellent photonic character. Furthermore, at high levels of infiltration the opal composite films demonstrated significant conductivity.

Within the carnal: re-reading Merleau-Ponty through the language of drawing

In order to present visual art as a paradigm for philosophy, Merleau-Ponty investigated the creative processes of artists whose work corresponded closely with his philosophical ideas. His essays on art are widely valued for emphasising process over product, and for challenging the primacy of the written word in all spheres of human expression. While it is clear that he initially favoured painting, Merleau-Ponty began to develop a much deeper understanding of the complexities of how art is made in his late work in parallel with his advancement of a new ontology. Although his ontology remains unfinished and only exists as working notes and a manuscript entitled The Visible and Invisible, Merleau-Ponty had begun to appreciate the fundamental role drawing plays in the making of art and the creation of a language of expression that is as vital as the written or spoken word. Through an examination of Merleau-Ponty’s unfinished manuscript and working notes my thesis will investigate his working methods and use of materials and also explore how he processed his ideas by using my own art practice as the basis of my research. This research will take the form of an inquiry into how the unfinished and incomplete nature of text and artworks, while they are still ‘works in progress’, can often reveal the more human and carnal components of creative processes. Applying my experience as a practitioner and a teacher in an art school, I focus on the significance of drawing practice for Merleau-Ponty’s later work, in order to rebalance an overemphasis on painting in the literature. Understanding the differences between these two art forms, and how they are taught, can offer an alternative engagement with Merleau-Ponty’s later work and his struggle to find a language to express his developing new ontology. In addition, by re-reading his work through the language of drawing, I believe we gain new insights which reaffirm Merleau-Ponty's relevance to contemporary art making and aesthetics.

Artificial opal photonic crystals and inverse opal structures - fundamentals and applications from optics to energy storage

Photonic crystals (PhCs) influence the propagation of light by their periodic variation in dielectric contrast or refractive index. This review outlines the attractive optical qualities inherent to most PhCs namely the presence of full or partial photonic band gaps and the possibilities they present towards the inhibition of spontaneous emission and the localization of light. Colloidal self-assembly of polymer or silica spheres is one of the most favoured and low cost methods for the formation of PhCs as artificial opals. The state of the art in growth methods currently used for colloidal self-assembly are discussed and the use of these structures for the formation of inverse opal architectures is then presented. Inverse opal structures with their porous and interconnected architecture span several technological arenas - optics and optoelectronics, energy storage, communications, sensor and biological applications. This review presents several of these applications and an accessible overview of the physics of photonic crystal optics that may be useful for opal and inverse opal researchers in general, with a particular emphasis on the recent use of these three-dimensional porous structures in electrochemical energy storage technology. Progress towards all-optical integrated circuits may lie with the concepts of the photonic crystal, but the unique optical and structural properties of these materials and the convergence of PhC and energy storage disciplines may facilitate further developments and non-destructive optical analysis capabilities for (electro)chemical processes that occur within a wide variety of materials in energy storage research.