7 resultados para capsule filling
em CORA - Cork Open Research Archive - University College Cork - Ireland
Resumo:
Technological developments in biomedical microsystems are opening up new opportunities to improve healthcare procedures. Swallowable diagnostic capsules are an example of this. In this paper, a diagnostic capsule technology is described based on direct-access sensing of the Gastro Intestinal (GI) fluids throughout the GI tract. The objective of this paper is two-fold: i) develop a packaging method for a direct access sensor, ii) develop an encapsulation method to protect the system electronics. The integrity of the interconnection after sensor packaging and encapsulation is correlated to its reliability and thus of importance. The zero level packaging of the sensor was achieved by using a so called Flip Chip Over Hole (FCOH) method. This allowed the fluidic sensing media to interface with the sensor, while the rest of the chip including the electrical connections can be insulated effectively. Initial tests using Anisotropic Conductive Adhesive (ACA) interconnect for the FCOH demonstrated good electrical connections and functionality of the sensor chip. Also a preliminary encapsulation trial of the flip chipped sensor on a flexible test substrate has been carried out and showed that silicone encapsulation of the system is a viable option.
Resumo:
Strain-free epitaxial quantum dots (QDs) are fabricated by a combination of Al local droplet etching (LDE) of nanoholes in AlGaAs surfaces and subsequent hole filling with GaAs. The whole process is performed in a conventional molecular beam epitaxy (MBE) chamber. Autocorrelation measurements establish single-photon emission from LDE QDs with a very small correlation function g (2)(0)≃ 0.01 of the exciton emission. Here, we focus on the influence of the initial hole depth on the QD optical properties with the goal to create deep holes suited for filling with more complex nanostructures like quantum dot molecules (QDM). The depth of droplet etched nanoholes is controlled by the droplet material coverage and the process temperature, where a higher coverage or temperature yields deeper holes. The requirements of high quantum dot uniformity and narrow luminescence linewidth, which are often found in applications, set limits to the process temperature. At high temperatures, the hole depths become inhomogeneous and the linewidth rapidly increases beyond 640 °C. With the present process technique, we identify an upper limit of 40-nm hole depth if the linewidth has to remain below 100 μeV. Furthermore, we study the exciton fine-structure splitting which is increased from 4.6 μeV in 15-nm-deep to 7.9 μeV in 35-nm-deep holes. As an example for the functionalization of deep nanoholes, self-aligned vertically stacked GaAs QD pairs are fabricated by filling of holes with 35 nm depth. Exciton peaks from stacked dots show linewidths below 100 μeV which is close to that from single QDs.
Resumo:
Crohn’s disease (CD) is a chronic, relapsing inflammatory condition affecting the gastrointestinal tract of humans, of which there is currently no cure. The precise etiology of CD is unknown, although it has become widely accepted that it is a multifactorial disease which occurs as a result of an abnormal immune response to commensal enteric bacteria in a genetically susceptible host. Recent studies have shown that a new group of Escherichia coli, called Adherent Invasive Escherichia coli (AIEC) are present in the guts of CD patients at a higher frequency than in healthy subjects, suggesting that they may play a role in the initiation and/or maintenance of the inflammation associated with CD. Two phenotypes define an AIEC and differentiate them from other groups of E. coli. Firstly, AIEC can adhere to and invade epithelial cells; and secondly, they can replicate in macrophages. In this study, we use a strain of AIEC which has been isolated from the colonic mucosa of a CD patient, called HM605, to examine the relationship between AIEC and the macrophage. We show, using a systematic mutational approach, that while the Tricarboxylic acid (TCA) cycle, the glyoxylate pathway, the Entner-Doudoroff (ED) pathway, the Pentose Phosphate (PP) pathway and gluconeogenesis are dispensable for the intramacrophagic growth of HM605, glycolysis is an absolute requirement for the ability of this organism to replicate intracellularly. We also show that HM605 activates the inflammasome, a major driver of inflammation in mammals. Specifically, we show that macrophages infected with HM605 produce significantly higher levels of the pro-inflammatory cytokine IL-1β than macrophages infected with a non-AIEC strain, and we show by immunoblotting that this is due to cleavage of caspase-1. We also show that macrophages infected with HM605 exhibit significantly higher levels of pyroptosis, a form of inflammatory cell death, than macrophages infected with a non-AIEC strain. Therefore, AIEC strains are more pro-inflammatory than non-AIEC strains and this may have important consequences in terms of CD pathology. Moreover, we show that while inflammasome activation by HM605 is independent of intracellular bacterial replication, it is dependent on an active bacterial metabolism. Through the establishment of a genetic screen aimed at identifying mutants which activate the inflammasome to lower levels than the wild-type, we confirm our observation that bacterial metabolism is essential for successful inflammasome activation by HM605 and we also uncover new systems/structures that may be important for inflammasome activation, such as the BasS/BasR two-component system, a type VI secretion system and a K1 capsule. Finally, in this study, we also identify a putative small RNA in AIEC strain LF82, which may be involved in modulating the motility of this strain. Overall this works shows that, in the absence of specialised virulence factors, the ability of AIEC to metabolise within the host cell may be a key determinant of its pathogenesis.
Resumo:
The differentiation of stem cells into multiple lineages has been explored in vascular regenerative medicine. However, in the case of smooth muscle cells (SMC), issues exist concerning inefficient rates of differentiation. In stem cells, multiple repressors potentially downregulate myocardin, the potent SRF coactivator induced SMC transcription including Krüppel like zinc finger transcription factor-4 (KLF4). This thesis aimed to explore the role of KLF4 in the regulation of myocardin gene expression in human smooth muscle stem/progenitor cells (hSMSPC), a novel circulating stem cell identified in our laboratory which expresses low levels of myocardin and higher levels of KLF4. hSMSPC cells cultured in SmGM2 1% FBS with TGF-β1 (5 ng/ml “differentiation media”) show limited SMC cell differentiation potential. Furthermore, myocardin transduced hSMSPC cells cultured in differentiation media induced myofilamentous SMC like cells with expression of SM markers. Five potential KLF4 binding sites were identified in silico within 3.9Kb upstream of the translational start site of the human myocardin promoter. Chromatin immunoprecipitation assays verified that endogenous KLF4 binds the human myocardin promoter at -3702bp with Respect to the translation start site (-1). Transduction of lentiviral vectors encoding either myocardin cDNA (LV_myocardin) or KLF4 targeting shRNA (LV_shKLF4 B) induced human myocardin promoter activity in hSMSPCs. Silencing of KLF4 expression in differentiation media induced smooth muscle like morphology by day 5 in culture and increased overtime with expression of SMC markers in hSMSPCs. Implantation of silastic tubes into the rat peritoneal cavity induces formation of a tissue capsule structure which may be used as vascular grafts. Rat SMSPCs integrate into, strengthen and enhance the SMC component of such tubular capsules. These data demonstrate that KLF4 directly represses myocardin gene expression in hSMSPCs, which when differentiated, provide a potential source of SMCs in the development of autologous vascular grafts in regenerative medicine.
Resumo:
This PhD thesis investigates the application of hollow core photonic crystal fibre for use as an optical fibre nano litre liquid sensor. The use of hollow core photonic crystal fibre for optical fibre sensing is influenced by the vast wealth of knowledge, and years of research that has been conducted for optical waveguides. Hollow core photonic crystal fibres have the potential for use as a simple, rapid and continuous sensor for a wide range of applications. In this thesis, the velocity of a liquid flowing through the core of the fibre (driven by capillary forces) is used for the determination of the viscosity of a liquid. The structure of the hollow core photonic crystal fibre is harnessed to collect Raman scatter from the sample liquid. These two methods are integrated to investigate the range of applications the hollow core photonic crystal fibre can be utilised for as an optical liquid sensor. Understanding the guidance properties of hollow core photonic crystal fibre is forefront in dynamically monitoring the liquid filling. When liquid is inserted fully or selectively to the capillaries, the propagation properties change from photonic bandgap guidance when empty, to index guidance when the core only is filled and finally to a shifted photonic bandgap effect, when the capillaries are fully filled. The alterations to the guidance are exploited for all viscosity and Raman scattering measurements. The concept of the optical fibre viscosity sensor was tested for a wide range of samples, from aqueous solutions of propan-1-ol to solutions of mono-saccharides in phosphate buffer saline. The samples chosen to test the concept were selected after careful consideration of the importance of the liquid in medical and industrial applications. The Raman scattering of a wide range of biological important fluids, such as creatinine, glucose and lactate were investigated, some for the first time with hollow core photonic crystal fibre.
Resumo:
In this thesis, we present the unique properties of hollow-core photonic crystal fibres (HC-PCFs) for sensing applications in terms of viscosity detection and DNA sensing using a special poly(ethylene) glycol (PEGDA) hydrogel. The low loss HC-PCFs ensure a long interaction length between the sample and the optical signals. Thus in this thesis, we report the characterisation of filled HC-PCFs and the development of a selective filling process. For the first time, we report the investigation of a new viscometer device, and a new device for DNA sensing development, and also the chemical process for hydrogel growth was adapted to the fibres. By combining HC-PCFs with the hydrogel we enable 3D volumetric sample confinement within the HC-PCF, further increasing the interaction between the sample and the optical signal. However, the hydrogel has a large influence on the guidance properties of the HC-PCF and the HC-PCF has a strong influence on the growth process for the hydrogel itself. When we integrate the hydrogel and HC-PCFs we detect concentration levels as low as 400 nM of labelled DNA. However, using our technology for fluorescence detection we can achieve results two orders of magnitude better than those previously reported.
Resumo:
It is difficult to overstate the importance of Juan Rulfo’s two major pieces of fictional narrative work—his haunting, enigmatic novel Pedro Páramo (1955) and his unrelenting depictions of the failures of post-revolutionary Mexico in his short story collection El Llano en llamas (1953). In her foreword to the Margaret Sayers Peden English translation, Susan Sontag hails Pedro Páramo as ‘not only one of the masterpieces of 20th Century world literature, but one of the most influential of the century’s books’. García Márquez has compared the influence of Rulfo on 20th Century world literature to that of Sophocles: ‘No son más de 300 páginas, pero son casi tantas y creo tan perdurables como las que conocemos de Sófocles’ and, completing this oftrepeated triumvirate of recommendations, Jorge Luis Borges has referred to Pedro Páramo as: ‘una de las mejores novelas de las literaturas de lengua hispánica, y aun de la literatura.’ Despite the praise heaped upon Rulfo’s two most famous books, when his third book of fiction, El gallo de oro y otros textos para cine, was finally published in 1980, just six years before his death, it was greeted with almost critical silence. It is precisely this publication that provides the focus of this investigation. The collection contains three texts—El despojo, La fórmula secreta and El gallo de oro. Constituting a third of the fictional work he published in his lifetime, expanding upon themes present in El Llano en llamas and Pedro Páramo while, at the same time, examining new ground, no thematic discussion of Rulfo’s written output is complete without including these texts. Yet they are frequently dismissed. In this way this investigation attempts to go some way towards filling this critical gap in the work of one of the most influential writers of the twentieth century