Advanced polymer membrane development in pervaporation dehydration and lateral flow diagnostics

The work in this thesis concerns the advanced development of polymeric membranes of two types; pervaporation and lateral-flow. The former produced from a solution casting method and the latter from a phase separation. All membranes were produced from casting lacquers. Early research centred on the development of viable membranes. This led to a supported polymer blend pervaporation membrane. Selective layer: plasticized 4:1 mass ratio sodium-alginate: poly(vinyl-alcohol) polymer blend. Using this membrane, pervaporation separation of ethanol/water mixtures was carefully monitored as a function of film thickness and time. Contrary to literature expectations, these films showed increased selectivity and decreased flux as film thickness was reduced. It is argued that morphology and structure of the polymer blend changes with thickness and that these changes define membrane efficiency. Mixed matrix membrane development was done using spherical, discreet, size-monodisperse mesoporous silica particles of 1.8 - 2μm diameter, with pore diameters of ~1.8 nm were incorporated into a poly(vinyl alcohol) [PVA] matrix. Inclusion of silica benefitted pervaporation performance for the dehydration of ethanol, improving flux and selectivity throughout in all but the highest silica content samples. Early lateral-flow membrane research produced a membrane from a basic lacquer composition required for phase inversion; polymer, solvent and non-solvent. Results showed that bringing lacquers to cloud point benefits both the pore structure and skin layers of the membranes. Advancement of this work showed that incorporation of ethanol as a mesosolvent into the lacquer effectively enhances membrane pore structure resulting in an improvement in lateral flow rates of the final membranes. This project details the formation mechanics of pervaporation and lateral-flow membranes and how these can be controlled. The principle methods of control can be applied to the formation of any other flat sheet polymer membranes, opening many avenues of future membrane research and industrial application.

Research and design of high-speed advanced analogue front-ends for fibre-optic transmission systems

In the last decade, we have witnessed the emergence of large, warehouse-scale data centres which have enabled new internet-based software applications such as cloud computing, search engines, social media, e-government etc. Such data centres consist of large collections of servers interconnected using short-reach (reach up to a few hundred meters) optical interconnect. Today, transceivers for these applications achieve up to 100Gb/s by multiplexing 10x 10Gb/s or 4x 25Gb/s channels. In the near future however, data centre operators have expressed a need for optical links which can support 400Gb/s up to 1Tb/s. The crucial challenge is to achieve this in the same footprint (same transceiver module) and with similar power consumption as today’s technology. Straightforward scaling of the currently used space or wavelength division multiplexing may be difficult to achieve: indeed a 1Tb/s transceiver would require integration of 40 VCSELs (vertical cavity surface emitting laser diode, widely used for short‐reach optical interconnect), 40 photodiodes and the electronics operating at 25Gb/s in the same module as today’s 100Gb/s transceiver. Pushing the bit rate on such links beyond today’s commercially available 100Gb/s/fibre will require new generations of VCSELs and their driver and receiver electronics. This work looks into a number of state‐of-the-art technologies and investigates their performance restraints and recommends different set of designs, specifically targeting multilevel modulation formats. Several methods to extend the bandwidth using deep submicron (65nm and 28nm) CMOS technology are explored in this work, while also maintaining a focus upon reducing power consumption and chip area. The techniques used were pre-emphasis in rising and falling edges of the signal and bandwidth extensions by inductive peaking and different local feedback techniques. These techniques have been applied to a transmitter and receiver developed for advanced modulation formats such as PAM-4 (4 level pulse amplitude modulation). Such modulation format can increase the throughput per individual channel, which helps to overcome the challenges mentioned above to realize 400Gb/s to 1Tb/s transceivers.

Challengers to provisional republicanism: the official republican movement, people’s democracy and the Irish republican socialist party, 1968–98

The Provisional IRA and its political wing Sinn Féin have attracted by far the greatest scholarly interest of all the players in the Northern Irish conflict. This emphasis is perfectly legitimate, given the centrality of the Provos to so many turning-points in the conflict, from the collapse of Stormont in the early 1970s to the hunger strikes of the following decade and the ceasefires which were followed by the Belfast Agreement. My project, however, looks at political groups that at one time or another challenged the Provos for leadership of the militant, anti-state constituency in Northern Ireland (chiefly based in the Catholic working class). Although never as large or influential as the Provisional republicans, groups such as the Official IRA and the Irish Republican Socialist Party sometimes had a discernible impact on the course of events which is overlooked by most studies, and often pioneered ideas and tactics that were later adopted by the Provos themselves. The idea that republicans should embrace political action and work in broad campaigning alliances was promoted by the IRSP and socialist groups such as People’s Democracy before it was taken up by Gerry Adams and his allies, while the Official IRA supported the principle of a settlement based on democratization of the Northern Irish state, which was later accepted by Sinn Féin in the form of the Belfast Agreement. The goal of my research is to provide a novel perspective on the conflict in Northern Ireland, while engaging with theoretical debates about its character.

The legitimation of risk and democracy: A case study of Bt cotton in Andhra Pradesh, India

This thesis explores the inter-related attempts to secure the legitimation of risk and democracy with regard to Bt cotton, a genetically modified crop, in the state of Andhra Pradesh in India. The research included nine months of ethnographic fieldwork, extensive library and newspaper research, as well as university attendance in India, undertaken between June, 2010 and March, 2011. This comparative study (involving organic, NPM and Bt cotton cultivation) was conducted in three villages in Telangana, a region which was granted secession from Andhra Pradesh in July, 2013, and in Hyderabad, the state capital. Andhra Pradesh is renowned for its agrarian crisis and farmer suicides, as well as for the conflict which Bt cotton represents. This study adopts the categories of legitimation developed by Van Leeuwen (2007; 2008) in order to explore the theory of risk society (Beck, 1992; 1994; 1999; 2009), and the Habermasian (1996: 356-366) core-periphery model as means of theoretically analysing democratic legitimacy. The legitimation of risk and democracy in relation to Bt cotton refers to normative views on the way in which power should be exercised with regard to risk differentiation, construction and definition. The analysis finds that the more legitimate the exercise of power, the lower the exposure to risk as a concern for the collective. This also has consequences for the way in which resources are distributed, knowledge constructed, and democratic praxis institutionalised as a concern for social and epistemic justice. The thesis argues that the struggle to legitimate risk and democracy has implications not only for the constitution of the new state of Telangana and the region’s development, but also for the emergence of global society and the future development of humanity as a whole.