'La Violence et la mauvaise foi': Context and rhetoric in Pierre Bayle's Ce que c'est que la France toute Catholique

My thesis presents an examination of Ce que c'est que la France toute Catholique (1686) by Pierre Bayle, a prominent figure in the Republic of Letters and the Huguenot Refuge in the seventeenth century. This pamphlet was the first occasional text that Bayle published following the Revocation of the Edict of Nantes in which the religious toleration afforded to the Huguenot minority in France was repealed, a pivotal moment in the history of early modern France. In my thesis, I analyse the specific context within which Bayle wrote this pamphlet as a means of addressing a number of issues, including the legitimacy of forced conversions, the impact of the religious controversy upon exchanges in the Republic of Letters, the nature of religious zeal and finally the alliance of Church and state discourses in the early modern period. An examination of this context provides a basis from which to re-interpret the rhetorical strategies at work within the pamphlet, and also to come to an increased understanding of how, why and to what end he wrote it. In turn this allowed me to examine the relationship between this often overlooked pamphlet and the more extensively studied Commentaire Philosophique, in which Bayle argued in favour of religious toleration. Ultimately, understanding the relationship between these two texts proves essential in order to characterise his response to the Revocation of the Edict of Nantes and to understand the place of the pamphlet within his oeuvre. Furthermore, an analysis of the pamphlet and the Commentaire Philosophique provide a lens through which to elucidate both Bayle's intellectual development at this early stage in his career, and also the wider context of the rise of toleration theory and the evolution of modes of civility within the Republic of Letters on the eve of the Enlightenment.

Investigation of lantibiotic regulation, immunity and synergy

Due to the increasing incidence of antibiotic resistant strains, the use of novel antimicrobials, such as bacteriocins, has become an ever more likely prospect. Lacticin 3147 (of which there are two components, Ltnα and Ltnβ) and nisin belong to the subgroup of bacteriocins called the lantibiotics, which has attracted much attention in recent years. The lantibiotics are antimicrobial peptides that contain unusual amino acids resulting from a series of enzyme-mediated post translational modifications. Given that there have been relatively few examples of lantibiotic-specific resistance; these antimicrobials appear to represent valid alternatives to classical antibiotics. However, the fact that lantibiotics are naturally only produced in small amounts often hinders their commercialisation. In order to overcome this bottleneck, several approaches can be employed. For example, we can create a situation that reduces the quantity of a lantibiotic required to inhibit a target by combining it with other antimicrobials. Here, following an initial screen involving lacticin 3147 and several classical antibiotics, it was observed between lacticin 3147 and the commercial antibiotics polymyxin B/E function synergistically. This reduced the amounts of the individual antimicrobials required for kill and broadened the spectrum of inhibition of both agents. Upon combination with polymyxins, lacticin 3147, which has been associated with Gram positive targets only, actively targeted Gram negative species such as Escherichia coli and Cronobacter sp. An alternative means of addressing problems associated with lantibiotic yield is to better understand how production is regulated, and ultimately use this information to enhance peptide levels. With this in mind the regulation of lacticin 3147 production from the promoter Pbac was investigated using a green fluorescent protein (GFP) expression reporter system. This revealed that elements within both of the divergent operons of the lacticin 3147 gene cluster are involved in Pbac regulation. That is, LtnR, already established as a negative regulator of itself and the lacticin 3147 associated immunity genes, also acts as an activator of Pbac transcription. In contrast, an enhanced level of expression is observed in the absence of the lacticin 3147 structural genes, ltnA1 and ltnA2, indicating that these genes/gene products are involved in Pbac repression. In fact, through complementation of the ltnA2 gene, it was revealed that this regulation is more likely to be dependent on the presence of the gene transcript rather that the corresponding prepropeptide or modified Ltnβ. It may be that if lacticin 3147 production is successfully enhanced, the ability of the producing cell to protect itself may become an issue. To prepare for such a possibility a bioengineered derivative of the lacticin 3147 immunity protein LtnI (LtnI I81V) which provides enhanced protection was discovered through an in depth investigation involving the site and saturation mutagenesis of this protein. In addition, the creation of truncated forms of LtnI allowed the identification of important and essential regions of this immunity protein. Finally, as mentioned, self-immunity is essential to prevent self-killing. However the discovery of nisin U immunity and regulatory gene homologues (spiFEGRR’K) within the pathogenic strain S. infantarius subsp. infantarius is a cause for concern as it represents an example of immune mimicry, a form of lantibiotic-specific resistance. The ability of spiFEG to confer protection was apparent when they successfully provided protection to nisin A, F, Z, Q and U when expressed heterologously in the nisin sensitive L. lactis HP host. As a consequence of the studies presented in this thesis, it is likely that strategies will emerge that will facilitate the production of greater levels of lacticin 3147 production and lead to enhanced immunity in lactococcal backgrounds. Alternatively the need for enhanced production could be avoided through the use of antimicrobial combinations. In addition, providing awareness of the threats of the emergence of resistance through immune mimicry can allow researchers to develop strategies to prevent this phenomenon from leading to the dissemination of lantibiotic resistance.

High-current inductors for high-power automotive DC-DC converters

This thesis is focused on the investigation of magnetic materials for high-power dcdc converters in hybrid and fuel cell vehicles and the development of an optimized high-power inductor for a multi-phase converter. The thesis introduces the power system architectures for hybrid and fuel cell vehicles. The requirements for power electronic converters are established and the dc-dc converter topologies of interest are introduced. A compact and efficient inductor is critical to reduce the overall cost, weight and volume of the dc-dc converter and optimize vehicle driving range and traction power. Firstly, materials suitable for a gapped CC-core inductor are analyzed and investigated. A novel inductor-design algorithm is developed and automated in order to compare and contrast the various magnetic materials over a range of frequencies and ripple ratios. The algorithm is developed for foil-wound inductors with gapped CC-cores in the low (10 kHz) to medium (30 kHz) frequency range and investigates the materials in a natural-convection-cooled environment. The practical effects of frequency, ripple, air-gap fringing, and thermal configuration are investigated next for the iron-based amorphous metal and 6.5 % silicon steel materials. A 2.5 kW converter is built to verify the optimum material selection and thermal configuration over the frequency range and ripple ratios of interest. Inductor size can increase in both of these laminated materials due to increased airgap fringing losses. Distributing the airgap is demonstrated to reduce the inductor losses and size but has practical limitations for iron-based amorphous metal cores. The effects of the manufacturing process are shown to degrade the iron-based amorphous metal multi-cut core loss. The experimental results also suggest that gap loss is not a significant consideration in these experiments. The predicted losses by the equation developed by Reuben Lee and cited by Colonel McLyman are significantly higher than the experimental results suggest. Iron-based amorphous metal has better preformance than 6.5 % silicon steel when a single cut core and natural-convection-cooling are used. Conduction cooling, rather than natural convection, can result in the highest power density inductor. The cooling for these laminated materials is very dependent on the direction of the lamination and the component mounting. Experimental results are produced showing the effects of lamination direction on the cooling path. A significant temperature reduction is demonstrated for conduction cooling versus natural-convection cooling. Iron-based amorphous metal and 6.5% silicon steel are competitive materials when conduction cooled. A novel inductor design algorithm is developed for foil-wound inductors with gapped CC-cores for conduction cooling of core and copper. Again, conduction cooling, rather than natural convection, is shown to reduce the size and weight of the inductor. The weight of the 6.5 % silicon steel inductor is reduced by around a factor of ten compared to natural-convection cooling due to the high thermal conductivity of the material. The conduction cooling algorithm is used to develop high-power custom inductors for use in a high power multi-phase boost converter. Finally, a high power digitally-controlled multi-phase boost converter system is designed and constructed to test the high-power inductors. The performance of the inductors is compared to the predictions used in the design process and very good correlation is achieved. The thesis results have been documented at IEEE APEC, PESC and IAS conferences in 2007 and at the IEEE EPE conference in 2008.

The impact of saving and credit cooperatives on food security in the West Amhara Region of Ethiopia

In rural Ethiopia, among other things, lack of adequate financial service is considered as the basic problem to alleviate rural poverty and to solve the problem of food insecurity. Commercial banks are restricted to urban centres. Providing rural financial service through RUSACCO to the poor has been proposed as a tool for economic development and for achieving food security. Evidence from research in this regard has been so far scanty, especially in rural Ethiopia. The aims of this study are to analyze the determinants of membership, to identify socioeconomic and demographic factors that influence members’ participation in RUSACCOs and to quantify the impact of RUSACCOs on member households’ food security. The study was conducted in two purposely selected woredas in the Amhara region one from food insecure (Lay Gayint woreda) and the other from food secure (Dejen woreda). Six RUSACCOs were selected randomly from these two woredas. Both qualitative and quantitative data were collected. Key informant interviews, focus group discussions and survey techniques were used to collect primary data. Collected data was then analyzed using mixed methods depending on the nature of data. For quantitative data analysis appropriate statistical models were used. The study result reveals that the number of members in each RUSACCO is very small. However, the majority of non-member respondents are willing to join RUSACCO. Lack of information about the benefits of RUSACCO membership is the main problem why many rural poor do not join RUSACCOs. Members participate in different aspects of the cooperatives, starting from attending general assembly up to board membership. They also participate actively in saving and borrowing activities of RUSACCO. The majority of the respondents believe the RUSACCO is a vital instrument in combating food insecurity. The empirical findings indicate that gender, marital status, occupation, educational level, participation in local leadership and participation in other income generation means determine the decision of rural poor to join a RUSACCO or not. The amount of saving is determined by household head occupation, farming experience and income level. While age of household head, primary occupation, farming experience, date of membership, annual total consumption expenditure, amount of saving and participation in other income generation activities influence members’ amount of borrowing by RUSACCO members. Finally, the study confirms that RUSACCO participation improves household food security. RUSACCO membership has made positive impact on household total consumption expenditure and food expenditure.