Electrochemical biosensor based on microfabricated electrode arrays for life sciences applications

In developing a biosensor, the utmost important aspects that need to be emphasized are the specificity and selectivity of the transducer. These two vital prerequisites are of paramount in ensuring a robust and reliable biosensor. Improvements in electrochemical sensors can be achieved by using microelectrodes and to modify the electrode surface (using chemical or biological recognition layers to improve the sensitivity and selectivity). The fabrication and characterisations of silicon-based and glass-based gold microelectrode arrays with various geometries (band and disc) and dimension (ranging from 10 μm-100 nm) were reported. It was found that silicon-based transducers of 10 μm gold microelectrode array exhibited the most stable and reproducible electrochemical measurements hence this dimension was selected for further study. Chemical electrodeposition on both 10 μm microband and microdisc were found viable by electro-assisted self-assembled sol-gel silica film and nanoporous-gold electrodeposition respectively. The fabrication and characterisations of on-chip electrochemical cell was also reported with a fixed diameter/width dimension and interspacing variation. With this regard, the 10 μm microelectrode array with interspacing distance of 100 μm exhibited the best electrochemical response. Surface functionalisations on single chip of planar gold macroelectrodes were also studied for the immobilisation of histidine-tagged protein and antibody. Imaging techniques such as atomic force microscopy, fluorescent microscopy or scanning electron microscope were employed to complement the electrochemical characterisations. The long-chain thiol of self-assembled monolayer with NTA-metal ligand coordination was selected for the histidine-tagged protein while silanisation technique was selected for the antibody immobilisation. The final part of the thesis described the development of a T-2 labelless immunosensor using impedimetric approach. Good antibody calibration curve was obtained for both 10 μm microband and 10 μm microdisc array. For the establishment of the T-2/HT-2 toxin calibration curve, it was found that larger microdisc array dimension was required to produce better calibration curve. The calibration curves established in buffer solution show that the microelectrode arrays were sensitive and able to detect levels of T-2/HT-2 toxin as low as 25 ppb (25 μg kg-1) with a limit of quantitation of 4.89 ppb for a 10 μm microband array and 1.53 ppb for the 40 μm microdisc array.

Development of large-scale colloidal crystallisation methods for the production of photonic crystals

Colloidal photonic crystals have potential light manipulation applications including; fabrication of efficient lasers and LEDs, improved optical sensors and interconnects, and improving photovoltaic efficiencies. One road-block of colloidal selfassembly is their inherent defects; however, they can be manufactured cost effectively into large area films compared to micro-fabrication methods. This thesis investigates production of ‘large-area’ colloidal photonic crystals by sonication, under oil co-crystallization and controlled evaporation, with a view to reducing cracking and other defects. A simple monotonic Stöber particle synthesis method was developed producing silica particles in the range of 80 to 600nm in a single step. An analytical method assesses the quality of surface particle ordering in a semiquantitative manner was developed. Using fast Fourier transform (FFT) spot intensities, a grey scale symmetry area method, has been used to quantify the FFT profiles. Adding ultrasonic vibrations during film formation demonstrated large areas could be assembled rapidly, however film ordering suffered as a result. Under oil cocrystallisation results in the particles being bound together during film formation. While having potential to form large areas, it requires further refinement to be established as a production technique. Achieving high quality photonic crystals bonded with low concentrations (<5%) of polymeric adhesives while maintaining refractive index contrast, proved difficult and degraded the film’s uniformity. A controlled evaporation method, using a mixed solvent suspension, represents the most promising method to produce high quality films over large areas, 75mm x 25mm. During this mixed solvent approach, the film is kept in the wet state longer, thus reducing cracks developing during the drying stage. These films are crack-free up to a critical thickness, and show very large domains, which are visible in low magnification SEM images as Moiré fringe patterns. Higher magnification reveals separation between alternate fringe patterns are domain boundaries between individual crystalline growth fronts.

Preclinical atherosclerosis in rheumatoid arthritis

Introduction: There is accumulating evidence of an increased risk of cardiovascular morbidity and mortality in rheumatoid arthritis patients. A combination of both traditional cardiovascular risks and rheumatoid specific factors appear to be responsible for driving this phenomenon. Rheumatoid arthritis has been an orphan of cardiologists in the past and rheumatologists themselves are not good at CVD screening. Identifying the extent of preclinical atherosclerosis in RA patients will help us to appreciate the magnitude of this serious problem in an Irish population. Methods: We undertook a cross-sectional study of 63 RA patients and 48 OA controls and compared the 2 groups with respect to 1) traditional CV risks factors, 2) serum biomarkers of inflammation, including CRP, TNFα, IL6 and PAI-1, 3) carotid intima-media thickness (cIMT), carotid plaque and ankle-brachial index (ABI) as markers of pre-clinical atherosclerosis, 4) biochemical and ultrasonic measures of endothelial dysfunction and 5) serum and echocardiographic measures of diastolic dysfunction. Within the RA group, we also investigated for associations between markers of inflammation, subclinical atherosclerosis and diastolic dysfunction. Results: Prevalence of traditional CV risks was similar in the RA and OA groups. A number of biomarkers of inflammation were significantly higher in the RA group: CRP, fibrinogen, IL- 2, -4, -6, TNFα. PAI-1, a marker of thrombosis, correlated with disease activity and subclinical atherosclerosis in RA patients. With regard to subclinical atherosclerosis measures, RA patients had a significantly lower ABI than OA patients. Carotid plaque and cIMT readings were similar in RA and OA patients. Assessment of endothelial function revealed that RA patients had significantly higher concentrations of adhesion molecules, in particular sero-positive RA patients and RA smokers. Adhesion molecule concentrations were associated with markers of diastolic dysfunction in RA. Urine PCR, another marker of endothelial dysfunction also correlated with diastolic dysfunction in RA. Assessment of endothelial function with flow mediated dilatation (FMD) found no difference between the RA and OA groups. Disease activity scores in RA patients were associated with endothelial dysfunction, as assessed by FMD. Conclusions: We did not find significant differences in measures of subclinical atherosclerosis, flow mediated dilatation or diastolic function between RA and OA patients. This is most likely in part due to the fact that there is increasing evidence that OA has an inflammatory component to its pathogenesis and is associated with metabolic syndrome and increased CV risk. We reported a significant association between urinary PCR and measures of diastolic dysfunction. Urinary PCR may be a useful screening tool for diastolic dysfunction in RA. The association between RA disease activity and measures of vascular function supports the theory that the excess cardiovascular burden in RA is linked to uncontrolled inflammation.