The Irish House of Lords, 1780-1800: politics and ideology

This thesis covers the Irish House of Lords in the last two decades of its life. A number of important themes run through the work - the regency crisis, patronage, the management of the Lords, the relationship between the Lords and Commons. These themes, explored from different angles, are vital to an understanding of the political role of the upper house in the 1780s and 1790s. This study is confined to the Lords as a political institution and thus its judicial role as final court of appeal, which was restored to it in 1782, will not be explored here. The thesis consists of two parts. Part one examines the structure and powers of the House of Lords while part two looks at the parties and policies of the house. Chapter one discusses the British constitution as imposed upon Ireland. Chapter two suggests the reasons why constitutional changes were introduced in 1782, and looks at the contribution made by the Irish House of Lords in securing these changes. Chapter three explores the various channels of influence which the peers enjoyed. Chapter four explores the sometimes tense relationship between Lords and Commons. Chapter five examines management of the House of Lords by Dublin Castle. Part two, begins at chapter six. This chapter explores the leadership of both parties within the Lords. Chapter seven looks at how patronage was used to reward those who were loyal to the government. Chapter eight explores the influence of the Whig opposition. Chapter nine looks at the controversial attempts made by Pitt and his ministry during the 1790s to win the support of catholics and turn them from the lure of French ideas, and of the response of the peers to these attempts. Chapter ten is concerned with the relationship between the peers of the House of Lords and the lords lieutenant during the 1790s. Chapter eleven looks at the Union and the House of Lords and attempts to answer the question historians have long asked: why did the Irish parliament and the House of Lords in particular, look favourably on the proposed union of the two kingdoms and the end of their own institution? The House of Lords in the closing decades of the eighteenth century was an institution within which the wealth and power of the kingdom could be found. Its members were politically active, both inside and outside the house. It contained a majority who saw the Crown as the source of stability, but it was a living and evolving political organism and therefore it contained men who believed that the Crown should have its influence limited. This evolution is also demonstrated in its desire for political change in 1782 and 1788. Its last, and perhaps most radical decision, was to vote for its own demise in 1900.

Transport energy demand: techno-economic modelling and scenarios for Irish climate policy

The case for energy policy modelling is strong in Ireland, where stringent EU climate targets are projected to be overshot by 2015. Policy targets aiming to deliver greenhouse gas and renewable energy targets have been made, but it is unclear what savings are to be achieved and from which sectors. Concurrently, the growth of personal mobility has caused an astonishing increase in CO2 emissions from private cars in Ireland, a 37% rise between 2000 and 2008, and while there have been improvements in the efficiency of car technology, there was no decrease in the energy intensity of the car fleet in the same period. This thesis increases the capacity for evidenced-based policymaking in Ireland by developing techno-economic transport energy models and using them to analyse historical trends and to project possible future scenarios. A central focus of this thesis is to understand the effect of the car fleet‘s evolving technical characteristics on energy demand. A car stock model is developed to analyse this question from three angles: Firstly, analysis of car registration and activity data between 2000 and 2008 examines the trends which brought about the surge in energy demand. Secondly, the car stock is modelled into the future and is used to populate a baseline “no new policy” scenario, looking at the impact of recent (2008-2011) policy and purchasing developments on projected energy demand and emissions. Thirdly, a range of technology efficiency, fuel switching and behavioural scenarios are developed up to 2025 in order to indicate the emissions abatement and renewable energy penetration potential from alternative policy packages. In particular, an ambitious car fleet electrification target for Ireland is examined. The car stock model‘s functionality is extended by linking it with other models: LEAP-Ireland, a bottom-up energy demand model for all energy sectors in the country; Irish TIMES, a linear optimisation energy system model; and COPERT, a pollution model. The methodology is also adapted to analyse trends in freight energy demand in a similar way. Finally, this thesis addresses the gap in the representation of travel behaviour in linear energy systems models. A novel methodology is developed and case studies for Ireland and California are presented using the TIMES model. Transport Energy

The study of molecular variation in Atlantic salmon (Salmo salar L.) and brown trout (Salmo trutta L.)

Polymorphic microsatellite DNA loci were used here in three studies, one on Salmo salar and two on S. trutta. In the case of S. salar, the survival of native fish and non-natives from a nearby catchment, and their hybrids, were compared in a freshwater common garden experiment and subsequently in ocean ranching, with parental assignment utilising microsatellites. Overall survival of non-natives was 35% of natives. This differential survival was mainly in the oceanic phase. These results imply a genetic basis and suggest local adaptation can occur in salmonids across relatively small geographic distances which may have important implications for the management of salmon populations. In the first case study with S trutta, the species was investigated throughout its spread as an invasive in Newfoundland, eastern Canada. Genetic investigation confirmed historical records that the majority of introductions were from a Scottish hatchery and provided a clear example of the structure of two expanding waves of spread along coasts, probably by natural straying of anadromous individuals, to the north and south of the point of human introduction. This study showed a clearer example of the genetic anatomy of an invasion than in previous studies with brown trout, and may have implications for the management of invasive species in general. Finally, the genetics of anadromous S. trutta from the Waterville catchment in south western Ireland were studied. Two significantly different population groupings, from tributaries in geographically distinct locations entering the largest lake in the catchment, were identified. These results were then used to assign very large rod caught sea trout individuals (so called “specimen” sea trout) back to region of origin, in a Genetic Stock Identification exercise. This suggested that the majority of these large sea trout originated from one of the two tributary groups. These results are relevant for the understanding of sea trout population dynamics and for the future management of this and other sea trout producing catchments. This thesis has demonstrated new insights into the population structuring of salmonids both between and within catchments. While these chapters look at the existence and scale of genetic variation from different angles, it might be concluded that the overarching message from this thesis should be to highlight the importance of maintaining genetic diversity in salmonid populations as vital for their long-term productivity and resilience.

Afterwords: reparative queer death and the contemporary Irish novel, 1960-2000

Given that an extant comprehensive study of homosexuality and the twentieth century Irish novel has yet to produced, this thesis is an attempt at rectifying such a gap in research by way of close textual analysis of writing from the latter half of the century—that is, from 1960-2000. Analysis of seven novels by four male authors – John Broderick, Desmond Hogan, Colm Tóibín and Keith Ridgway – lead to one overarching feature common to all four writers becoming clear: the homosexual or queer is always dying or already ‘dead’. ‘Dead’ is placed in inverted commas here as it is not only biological death that characterises the fate of gay men in the aforementioned literature. In the first instance, such men are also always already ‘dead’—that is, by light of their disenfranchisement as homosexual or queer, they are, in socialized terms, examples of the ‘living’ dead. Secondly, biological death neither fully obliterates the queer body nor its disruptive influence. Consequently, one of the overarching ways in which I read queer death in the late twentieth century Irish novel is through the prism of its reparative ‘afterw(a)ord’. On the one hand, such readings are temporally based (that is, reading from a point beyond the death of the protagonist - or their ‘afterward’); while, on the other hand, such readings are stylistically premised (that is, reading or interpreting the narrative itself as an ‘afterword’). The current project thus constitutes an original contribution to knowledge by establishing variant ways of reading the contemporary Irish novel from the point of view of the queer ‘unliving’. In assessing such heterogeneous aspects of contemporary queer death, the project a) contributes to recent, largely Anglo-American-based literary theoretical research on the queer and the eschatological, and b) provides a more contemporized literary base upon which future research can uncover a continuum of Irish queer writing in the twentieth century, one concerned with writing prior to 1960 and not limited to writing my men, in which death and same-sex desire are at parallel angles to one another.

A microscopic study of structural and electronic properties of functionalized silicon surfaces based on first-principles

Surface modification of silicon with organic monolayers tethered to the surface by different linkers is an important process in realizing future (opto-)electronic devices. Understanding the role played by the nature of the linking group and the chain length on the adsorption structures and electronic properties of these assemblies is vital to advance this technology. This Thesis is a study of such properties and contributes in particular to a microscopic understanding of induced changes in the work function of experimentally studied functionalized silicon surfaces. Using first-principles density functional theory (DFT), at the first step, we provide predictions for chemical trends in the work function of hydrogenated silicon (111) surfaces modified with various terminations. For nonpolar terminating atomic species such as F, Cl, Br, and I, the change in the work function is directly proportional to the amount of charge transferred from the surface, thus relating to the difference in electronegativity of the adsorbate and silicon atoms. The change is a monotonic function of coverage in this case, and the work function increases with increasing electronegativity. Polar species such as −TeH, −SeH, −SH, −OH, −NH2, −CH3, and −BH2 do not follow this trend due to the interaction of their dipole with the induced electric field at the surface. In this case, the magnitude and sign of the surface dipole moment need to be considered in addition to the bond dipole to generally describe the change in work function. Compared to hydrogenated surfaces, there is slight increase in the work function of H:Si(111)-XH, where X = Te, Se, and S, whereas reduction is observed for surfaces covered with −OH, −CH3, and −NH2. Next, we study the hydrogen passivated Si(111) surface modified with alkyl chains of the general formula H:Si–(CH2)n–CH2 and H:Si–X–(CH2)n–CH3, where X = NH, O, S and n = (0, 1, 3, 5, 7, 9, 11), at half coverage. For (X)–Hexyl and (X)–Dodecyl functionalization, we also examined various coverages up to full monolayer grafting in order to validate the result of half covered surface and the linker effect on the coverage. We find that it is necessary to take into account the van der Waals interaction between the alkyl chains. The strongest binding is for the oxygen linker, followed by S, N, and C, irrespective of chain length. The result revealed that the sequence of the stability is independent of coverage; however, linkers other than carbon can shift the optimum coverage considerably and allow further packing density. For all linkers apart from sulfur, structural properties, in particular, surface-linker-chain angles, saturate to a single value once n > 3. For sulfur, we identify three regimes, namely, n = 0–3, n = 5–7, and n = 9–11, each with its own characteristic adsorption structures. Where possible, our computational results are shown to be consistent with the available experimental data and show how the fundamental structural properties of modified Si surfaces can be controlled by the choice of linking group and chain length. Later we continue by examining the work function tuning of H:Si(111) over a range of 1.73 eV through adsorption of alkyl monolayers with general formula -[Xhead-group]-(CnH2n)-[Xtail-group], X = O(H), S(H), NH(2). The work function is practically converged at 4 carbons (8 for oxygen), for head-group functionalization. For tail-group functionalization and with both head- and tail-groups, there is an odd-even effect in the behavior of the work function, with peak-to-peak amplitudes of up to 1.7 eV in the oscillations. This behavior is explained through the orientation of the terminal-group's dipole. The shift in the work function is largest for NH2-linked and smallest for SH-linked chains and is rationalized in terms of interface dipoles. Our study reveals that the choice of the head- and/or tail-groups effectively changes the impact of the alkyl chain length on the work function tuning using self-assembled monolayers and this is an important advance in utilizing hybrid functionalized Si surfaces. Bringing together the understanding gained from studying single type functionalization of H:Si(111) with different alkyl chains and bearing in mind how to utilize head-group, tail-group or both as well as monolayer coverage, in the final part of this Thesis we study functionalized H:Si(111) with binary SAMs. Aiming at enhancing work function adjustment together with SAM stability and coverage we choose a range of terminations and linker-chains denoted as –X–(Alkyl) with X = CH3, O(H), S(H), NH(2) and investigate the stability and work function of various binary components grafted onto H:Si(111) surface. Using binary functionalization with -[NH(2)/O(H)/S(H)]-[Hexyl/Dodecyl] we show that work function can be tuned within the interval of 3.65-4.94 eV and furthermore, enhance the SAM’s stability. Although direct Si-C grafted SAMs are less favourable compared to their counterparts with O, N or S linkage, regardless of the ratio, binary functionalized alkyl monolayers with X-alkyl (X = NH, O) is always more stable than single type alkyl functionalization with the same coverage. Our results indicate that it is possible to go beyond the optimum coverage of pure alkyl functionalized SAMs (50%) by adding a linker with the correct choice of the linker. This is very important since dense packed monolayers have fewer defects and deliver higher efficiency. Our results indicate that binary anchoring can modify the charge injection and therefore bond stability while preserving the interface electronic structure.

Beyond simple imaging with energetic beams – nanopatterning, correlative microscopy and statistical analysis of inclusions

Electron microscopy (EM) has advanced in an exponential way since the first transmission electron microscope (TEM) was built in the 1930’s. The urge to ‘see’ things is an essential part of human nature (talk of ‘seeing is believing’) and apart from scanning tunnel microscopes which give information about the surface, EM is the only imaging technology capable of really visualising atomic structures in depth down to single atoms. With the development of nanotechnology the demand to image and analyse small things has become even greater and electron microscopes have found their way from highly delicate and sophisticated research grade instruments to key-turn and even bench-top instruments for everyday use in every materials research lab on the planet. The semiconductor industry is as dependent on the use of EM as life sciences and pharmaceutical industry. With this generalisation of use for imaging, the need to deploy advanced uses of EM has become more and more apparent. The combination of several coinciding beams (electron, ion and even light) to create DualBeam or TripleBeam instruments for instance enhances the usefulness from pure imaging to manipulating on the nanoscale. And when it comes to the analytic power of EM with the many ways the highly energetic electrons and ions interact with the matter in the specimen there is a plethora of niches which evolved during the last two decades, specialising in every kind of analysis that can be thought of and combined with EM. In the course of this study the emphasis was placed on the application of these advanced analytical EM techniques in the context of multiscale and multimodal microscopy – multiscale meaning across length scales from micrometres or larger to nanometres, multimodal meaning numerous techniques applied to the same sample volume in a correlative manner. In order to demonstrate the breadth and potential of the multiscale and multimodal concept an integration of it was attempted in two areas: I) Biocompatible materials using polycrystalline stainless steel and II) Semiconductors using thin multiferroic films. I) The motivation to use stainless steel (316L medical grade) comes from the potential modulation of endothelial cell growth which can have a big impact on the improvement of cardio-vascular stents – which are mainly made of 316L – through nano-texturing of the stent surface by focused ion beam (FIB) lithography. Patterning with FIB has never been reported before in connection with stents and cell growth and in order to gain a better understanding of the beam-substrate interaction during patterning a correlative microscopy approach was used to illuminate the patterning process from many possible angles. Electron backscattering diffraction (EBSD) was used to analyse the crystallographic structure, FIB was used for the patterning and simultaneously visualising the crystal structure as part of the monitoring process, scanning electron microscopy (SEM) and atomic force microscopy (AFM) were employed to analyse the topography and the final step being 3D visualisation through serial FIB/SEM sectioning. II) The motivation for the use of thin multiferroic films stems from the ever-growing demand for increased data storage at lesser and lesser energy consumption. The Aurivillius phase material used in this study has a high potential in this area. Yet it is necessary to show clearly that the film is really multiferroic and no second phase inclusions are present even at very low concentrations – ~0.1vol% could already be problematic. Thus, in this study a technique was developed to analyse ultra-low density inclusions in thin multiferroic films down to concentrations of 0.01%. The goal achieved was a complete structural and compositional analysis of the films which required identification of second phase inclusions (through elemental analysis EDX(Energy Dispersive X-ray)), localise them (employing 72 hour EDX mapping in the SEM), isolate them for the TEM (using FIB) and give an upper confidence limit of 99.5% to the influence of the inclusions on the magnetic behaviour of the main phase (statistical analysis).