Three-dimensional outcomes of twin-block appliance treatment and the influence of the postured wax bite

Aims 1 To identify the 3D soft tissue volumetric and linear landmark changes following treatment with the Twin-Block Appliance TBA. 2 To estimate the TBA treatment outcome on the soft tissue facial profile volumetric and linear landmark changes from the Postured Wax Bite (PWB). 3 To identify if there is any association between certain soft tissue landmark variables and successful treatment outcome of the TBA as measured by the reduction in overjet. 4 To assess the effects of TBA treatment on facial expressions. Materials and Methods Forty-seven Caucasian subjects with Class II division 1 were recruited. 3D images captured of each subject, pre-treatment (T1), with the PWB (T2) and at the end of treatment (T3). Soft tissue volumetric and linear changes as well as the correlation between facial parameters and successful treatment were calculated. Results The mean soft tissue volumetric change from T1 to T3 was 22.24 ± 16.73 cm³. Soft tissue profile linear changes from T1-T3 for lower facial landmarks were 4-5 mm. From T1-T3, the mean soft tissue volumetric change of the total sample was 60% of the change produced by the PWB (T1 to T2). Correlations were weak for all 3D facial parameters and successful overjet reduction. Facial expression changes were only significant for the lower landmarks. Conclusions 1 TBA treatment, in growing subjects, increased the lower facial soft tissue volume and caused forward movement of the lower soft tissue facial profile landmarks.2 The PWB can be used to estimate the treatment outcome of the TBA on soft tissue profile changes.3 No association was found between soft tissue landmark variables and successful overjet reduction.4 TBA treatment had no effect on the upper facial landmarks for each facial expression but it changed the lower facial expressions significantly except for maximal smile in males.

Integrated spot size converters for InP based photonic systems

The ever increasing demand for broadband communications requires sophisticated devices. Photonic integrated circuits (PICs) are an approach that fulfills those requirements. PICs enable the integration of different optical modules on a single chip. Low loss fiber coupling and simplified packaging are key issues in keeping the price of PICs at a low level. Integrated spot size converters (SSC) offer an opportunity to accomplish this. Design, fabrication and characterization of SSCs based on an asymmetric twin waveguide (ATG) at a wavelength of 1.55 μm are the main elements of this dissertation. It is theoretically and experimentally shown that a passive ATG facilitates a polarization filter mechanism. A reproducible InP process guideline is developed that achieves vertical waveguides with smooth sidewalls. Birefringence and resonant coupling are used in an ATG to enable a polarization filtering and splitting mechanism. For the first time such a filter is experimentally shown. At a wavelength of 1610 nm a power extinction ratio of (1.6 ± 0.2) dB was measured for the TE- polarization in a single approximately 372 μm long TM- pass polarizer. A TE-pass polarizer with a similar length was demonstrated with a TM/TE-power extinction ratio of (0.7 ± 0.2) dB at 1610 nm. The refractive indices of two different InGaAsP compositions, required for a SSC, are measured by the reflection spectroscopy technique. A SSC layout for dielectric-free fabricated compact photodetectors is adjusted to those index values. The development and the results of the final fabrication procedure for the ATG concept are outlined. The etch rate, sidewall roughness and selectivity of a Cl2/CH4/H2 based inductively coupled plasma (ICP) etch are investigated by a design of experiment approach. The passivation effect of CH4 is illustrated for the first time. Conditions are determined for etching smooth and vertical sidewalls up to a depth of 5 μm.

Exploring the Zionist evolution of Robert Briscoe: History and memory

Robert Briscoe was the Dublin born son of Lithuanian and German-Jewish immigrants. As a young man he joined Sinn Féin and was an important figure in the War of Independence due to a role as one of the IRA’s main gun-procuring agents. He took the anti-Treaty side during an internecine Civil War, mainly due to the influence of Eamon de Valera and retained a filial devotion towards him for the rest of his life. In 1926 he was a founding member of Fianna Fáil, de Valera’s breakaway republican party, which would dominate twentieth-century Irish politics. He was first elected as a Fianna Fáil T.D. (Teachta Dála, Deputy to the Dáil) in 1927, and successfully defended his seat eleven times becoming the first Jewish Lord Mayor of Dublin in 1956, an honour that was repeated in 1961. On this basis alone, it can be argued that Briscoe was a significant presence in an embryonic Irish political culture; however, when his role in the 1930s Jewish immigration endeavor is acknowledged, it is clear that he played a unique part in one of the most contentious political and social discourses of the pre-war years. This was reinforced when Briscoe embraced Zionism in a belated realisation that the survival of his European co-religionists could only be guaranteed if an independent Jewish state existed. This information is to a certain degree public knowledge; however, the full extent of his involvement as an immigration advocate for potential Jewish refugees, and the seniority he achieved in the New Zionist Organisation (Revisionists) has not been fully recognised. This is partly explicable because researchers have based their assessment of Briscoe on an incomplete political archive in the National Library of Ireland (NLI). The vast majority of documentation pertaining to his involvement in the immigration endeavor has not been available to scholars and remains the private property of Robert Briscoe’s son, Ben Briscoe. The lack of immigration files in the NLI was reinforced by the fact that information about Briscoe’s Revisionist engagement was donated to the Jabotinsky Institute in Tel Aviv and can only be accessed physically by visiting Israel. Therefore, even though these twin endeavors have been commented on by a number of academics, their assessments have tended to be based on an incomplete archive, which was supplemented by Briscoe’s autobiographical memoir published in 1958. This study will attempt to fill in the missing gaps in Briscoe’s complex political narrative by incorporating the rarely used private papers of Robert Briscoe, and the difficult to access Briscoe files in Tel Aviv. This undertaking was only possible when Mr.Ben Briscoe graciously granted me full and unrestricted access to his father’s papers, and after a month-long research trip to the Jabotinsky Institute in Tel Aviv. Access to this rarely used documentation facilitated a holistic examination of Briscoe’s complex and multifaceted political reality. It revealed the full extent of Briscoe’s political and social evolution as the Nazi instigated Jewish emigration crisis reached catastrophic proportions. He was by turn Fianna Fáil nationalist, Jewish immigration advocate and senior Revisionist actor on a global stage. The study will examine the contrasting political and social forces that initiated each stage of Briscoe’s Zionist awakening, and in the process will fill a major gap in Irish-Jewish historiography by revealing the full extent of his Revisionist engagement.

Characterisation and application of fruit by-products as novel ingredients in gluten-free products

The physicochemical and nutritional properties of two fruit by-products were initially studied. Apple pomace (AP) contained a high level of fibre and pectin. The isolated AP pectin had a high level of methylation which developed viscous pastes. Orange pomace also had high levels of fibre and pectin, and it was an abundant source of minerals such as potassium and magnesium. Due to the fibrous properties of orange pomace flour, proofing and water addition were studied in a bread formulation. When added at levels greater than 6%, the loaf volume decreased. An optimised formulation and proofing time was derived using the optimisation tool; these consisted of 5.5% orange pomace, 94.6% water inclusion and with 49 minutes proofing. These optimised parameters doubled the total dietary fibre content of the bread compared to the original control. Pasting results showed how orange pomace inclusions reduced the final viscosity of the batter, reducing the occurrence of starch gelatinisation. Rheological properties i.e. the storage modulus (G') and complex modulus (G*) increased in the orange pomace batter compared to the control batter. This demonstrates how the orange pomace as an ingredient improved the robustness of the formulation. Sensory panellists scored the orange pomace bread comparably to the control bread. Milled apple pomace was studied as a potential novel ingredient in an extruded snack. Parameters studied included apple pomace addition, die head temperature and screw speed. As screw speed increased the favourable extrudate characteristics such as radical expansion ratio, porosity and specific volume decreased. The inclusion of apple pomace had a negative effect on extrudate characteristics at levels greater than 8% addition. Including apple pomace reduced the hardness and increased the crispiness of the snack. The optimised and validated formulation and extrusion process contained the following parameters: 7.7% apple pomace, 150°C die head temperature and a screw speed of 69 rpm.

Composition portfolio and commentaries

In an attempt to provide an analytical entry point into my compositional practice, I have identified eight themes which are significantly recurrent: reduction – the selection of a small number of elements; imperfection – a damaged or warped characteristic of sound; hierarchy – a concern with the roles of instruments with regard to their relative prominence; motion – apparently static sound masses consist of fine internal movement; listener perception – expectations for change influence the experience of affect; translation – the transitioning of electronic sounds to the acoustic realm, and vice versa; immersion – the creation of an accommodating soundscape; blurring – smearing and overlapping sounds or genres. Each of these eight factors is associated with relevant precedents in the history and theory of music that have been influential on my work. These include the minimalist compositions of Steve Reich and Arvo Pärt; the lo-fi aesthetic of Boards of Canada and My Bloody Valentine; concerns with political hierarchy in the work of Louis Andriessen; the variations of dynamics and microtonal shifts of Giacinto Scelsi; Leonard B. Meyer's account of expectation in music; cross-fertilisation of the acoustic and electronic in pieces by Gérard Grisey and Gyorgy Ligeti; the immersive technique of Brian Eno's ambient music; and the overlapping sounds of Aphex Twin. These eight factors are variously applicable to the eleven submitted pieces, which are individually analysed with reference to the most significant of the categories. Together they form a musical language that sustains the interaction of a variety of techniques, concepts and genres.

Novel processes, test structures and characterisation for future germanium technologies

In order to widely use Ge and III-V materials instead of Si in advanced CMOS technology, the process and integration of these materials has to be well established so that their high mobility benefit is not swamped by imperfect manufacturing procedures. In this dissertation number of key bottlenecks in realization of Ge devices are investigated; We address the challenge of the formation of low resistivity contacts on n-type Ge, comparing conventional and advanced rapid thermal annealing (RTA) and laser thermal annealing (LTA) techniques respectively. LTA appears to be a feasible approach for realization of low resistivity contacts with an incredibly sharp germanide-substrate interface and contact resistivity in the order of 10 -7 Ω.cm2. Furthermore the influence of RTA and LTA on dopant activation and leakage current suppression in n+/p Ge junction were compared. Providing very high active carrier concentration > 1020 cm-3, LTA resulted in higher leakage current compared to RTA which provided lower carrier concentration ~1019 cm-3. This is an indication of a trade-off between high activation level and junction leakage current. High ION/IOFF ratio ~ 107 was obtained, which to the best of our knowledge is the best reported value for n-type Ge so far. Simulations were carried out to investigate how target sputtering, dose retention, and damage formation is generated in thin-body semiconductors by means of energetic ion impacts and how they are dependent on the target physical material properties. Solid phase epitaxy studies in wide and thin Ge fins confirmed the formation of twin boundary defects and random nucleation growth, like in Si, but here 600 °C annealing temperature was found to be effective to reduce these defects. Finally, a non-destructive doping technique was successfully implemented to dope Ge nanowires, where nanowire resistivity was reduced by 5 orders of magnitude using PH3 based in-diffusion process.