Learning to Teach and its Implications for the Continuum of Teacher Education: A Nine Country Cross-national Study.

The purpose of this Report is to inform discussions, policy formulation, and strategic planning on teacher education in Ireland. The research gives priority to initial teacher education (ITE) and induction, their interface, and implications for the continuum of teacher education, including continuing professional development (CPD). The study involved a two-pronged approach: a narrative review of recent and relevant literature and a cross-national review of teacher education policies in nine countries, namely, Ireland, Northern Ireland, Scotland, England, Finland, USA, Poland, Singapore and New Zealand. Adopting a broad, balanced and comprehensive understanding of the role of the contemporary teacher, it provides a framework for developing quality teacher education in Ireland. The Report incorporates exemplars of good practice and notes their implementation challenges for the Irish context.  Chapter One provides a framework for conceptualising quality teacher education and the continuum. Key features that emerge from the literature are discussed: teachers¿ practice, quality teaching, the professional life-cycle, teacher learning and relationships. With more specific reference to the continuum, Chapter Two overviews initial teacher education, induction, learning outcomes and accreditation in the selected countries, including Ireland. Key features of policy in the various countries are summarised. Individual country profiles, incorporating descriptions of socio-political, teaching and teacher education contexts, are further detailed in Appendix A. Chapter Three analyses relevant literature on initial teacher education, induction, learning outcomes/professional standards and accreditation. Along with previous chapters it provides the basis for recommendations for teacher education that are presented in Chapter Four. Chapter Four draws together the findings emerging from the cross-national review in terms of the contemporary context of teacher education in Ireland and identifies key challenges and possible lines of policy development as well as recommendations for the Teaching Council and other teacher education stakeholders. Each generation has an opportunity to provide the vision and resources for renewing teacher education in light of ambitious social, economic and educational aspirations to meet perceived societal and education challenges (as occurred in the 1970s). Despite the publication of two key reviews of initial teacher education a number of years ago, there is considerable scope for further reform of teacher education. However, significant changes have occurred to teacher education course provision and content over the last 100 years. In this report, we have stressed the need for, and called for investment in, greater system and programme coherence, mentoring to support assisted practice, knowledge integration, critical reflective practice, inquiry and the development of vibrant partnerships between higher education institutions and schools as the basis for teacher education reform across the continuum. This Executive Summary presents the Report¿s context, key findings and recommendations emerging from the analysis.  

Market-oriented new product development of functional beverages

Strategic reviews of the Irish Food and Beverage Industry have consistently emphasised the need for food and beverage firms to improve their innovation and marketing capabilities, in order to maintain competitiveness in both domestic and overseas markets. In particular, the functional food and beverages market has been singled out as an extremely important emerging market, which Irish firms could benefit from through an increased technological and market orientation. Although health and wellness have been the most significant drivers of new product development (NPD) in recent years, failure rates for new functional foods and beverages have been reportedly high. In that context, researchers in the US, UK, Denmark and Ireland have reported a marked divergence between NPD practices within food and beverage firms and normative advice for successful product development. The high reported failure rates for new functional foods and beverages suggest a failure to manage customer knowledge effectively, as well as a lack of knowledge management between functional disciplines involved in the NPD process. This research explored the concept of managing customer knowledge at the early stages of the NPD process, and applied it to the development of a range of functional beverages, through the use of advanced concept optimisation research techniques, which provided for a more market-oriented approach to new food product development. A sequential exploratory research design strategy using mixed research methods was chosen for this study. First, the qualitative element of this research investigated customers’ choice motives for orange juice and soft drinks, and explored their attitudes and perceptions towards a range of new functional beverage concepts through a combination of 15 in-depth interviews and 3 focus groups. Second, the quantitative element of this research consisted of 3 conjoint-based questionnaires administered to 400 different customers in each study in order to model their purchase preferences for chilled nutrient-enriched and probiotic orange juices, and stimulant soft drinks. The in-depth interviews identified the key product design attributes that influenced customers’ choice motives for orange juice. The focus group discussions revealed that groups of customers were negative towards the addition of certain functional ingredients to natural foods and beverages. K-means cluster analysis was used to quantitatively identify segments of customers with similar preferences for chilled nutrient-enriched and probiotic orange juices, and stimulant soft drinks. Overall, advanced concept optimisation research methods facilitate the integration of the customer at the early stages of the NPD process, which promotes a multi-disciplinary approach to new food product design. This research illustrated how advanced concept optimisation research methods could contribute towards effective and efficient knowledge management in the new food product development process.

Grid integration of wave energy & generic modelling of ocean devices for power system studies

The work presented in this thesis covers four major topics of research related to the grid integration of wave energy. More specifically, the grid impact of a wave farm on the power quality of its local network is investigated. Two estimation methods were developed regarding the flicker level Pst generated by a wave farm in relation to its rated power as well as in relation to the impedance angle ψk of the node in the grid to which it is connected. The electrical design of a typical wave farm design is also studied in terms of minimum rating for three types of costly pieces of equipment, namely the VAr compensator, the submarine cables and the overhead line. The power losses dissipated within the farm's electrical network are also evaluated. The feasibility of transforming a test site into a commercial site of greater rated power is investigated from the perspective of power quality and of cables and overhead line thermal loading. Finally, the generic modelling of ocean devices, referring here to both wave and tidal current devices, is investigated.

Hybrid integration and packaging of grating-coupled silicon photonics

This thesis covers both the packaging of silicon photonic devices with fiber inputs and outputs as well as the integration of laser light sources with these same devices. The principal challenge in both of these pursuits is coupling light into the submicrometer waveguides that are the hallmark of silicon-on-insulator (SOI) systems. Previous work on grating couplers is leveraged to design new approaches to bridge the gap between the highly-integrated domain of silicon, the Interconnected world of fiber and the active region of III-V materials. First, a novel process for the planar packaging of grating couplers with fibers is explored in detail. This technology allows the creation of easy-to-use test platforms for laser integration and also stands on its own merits as an enabling technology for next-generation silicon photonics systems. The alignment tolerances of this process are shown to be well-suited to a passive alignment process and for wafer-scale assembly. Furthermore, this technology has already been used to package demonstrators for research partners and is included in the offerings of the ePIXfab silicon photonics foundry and as a design kit for PhoeniX Software’s MaskEngineer product. After this, a process for hybridly integrating a discrete edge-emitting laser with a silicon photonic circuit using near-vertical coupling is developed and characterized. The details of the various steps of the design process are given, including mechanical, thermal, optical and electrical steps. The interrelation of these design domains is also discussed. The construction process for a demonstrator is outlined, and measurements are presented of a series of single-wavelength Fabry-Pérot lasers along with a two-section laser tunable in the telecommunications C-band. The suitability and potential of this technology for mass manufacture is demonstrated, with further opportunities for improvement detailed and discussed in the conclusion.

Development of germanium/silicon integration for near infrared detection

Silicon (Si) is the base material for electronic technologies and is emerging as a very attractive platform for photonic integrated circuits (PICs). PICs allow optical systems to be made more compact with higher performance than discrete optical components. Applications for PICs are in the area of fibre-optic communication, biomedical devices, photovoltaics and imaging. Germanium (Ge), due to its suitable bandgap for telecommunications and its compatibility with Si technology is preferred over III-V compounds as an integrated on-chip detector at near infrared wavelengths. There are two main approaches for Ge/Si integration: through epitaxial growth and through direct wafer bonding. The lattice mismatch of ~4.2% between Ge and Si is the main problem of the former technique which leads to a high density of dislocations while the bond strength and conductivity of the interface are the main challenges of the latter. Both result in trap states which are expected to play a critical role. Understanding the physics of the interface is a key contribution of this thesis. This thesis investigates Ge/Si diodes using these two methods. The effects of interface traps on the static and dynamic performance of Ge/Si avalanche photodetectors have been modelled for the first time. The thesis outlines the original process development and characterization of mesa diodes which were fabricated by transferring a ~700 nm thick layer of p-type Ge onto n-type Si using direct wafer bonding and layer exfoliation. The effects of low temperature annealing on the device performance and on the conductivity of the interface have been investigated. It is shown that the diode ideality factor and the series resistance of the device are reduced after annealing. The carrier transport mechanism is shown to be dominated by generation–recombination before annealing and by direct tunnelling in forward bias and band-to-band tunnelling in reverse bias after annealing. The thesis presents a novel technique to realise photodetectors where one of the substrates is thinned by chemical mechanical polishing (CMP) after bonding the Si-Ge wafers. Based on this technique, Ge/Si detectors with remarkably high responsivities, in excess of 3.5 A/W at 1.55 μm at −2 V, under surface normal illumination have been measured. By performing electrical and optical measurements at various temperatures, the carrier transport through the hetero-interface is analysed by monitoring the Ge band bending from which a detailed band structure of the Ge/Si interface is proposed for the first time. The above unity responsivity of the detectors was explained by light induced potential barrier lowering at the interface. To our knowledge this is the first report of light-gated responsivity for vertically illuminated Ge/Si photodiodes. The wafer bonding approach followed by layer exfoliation or by CMP is a low temperature wafer scale process. In principle, the technique could be extended to other materials such as Ge on GaAs, or Ge on SOI. The unique results reported here are compatible with surface normal illumination and are capable of being integrated with CMOS electronics and readout units in the form of 2D arrays of detectors. One potential future application is a low-cost Si process-compatible near infrared camera.

High-efficiency photovoltaics through mechanically stacked integration of solar cells based on the InP lattice constant

Solar Energy is a clean and abundant energy source that can help reduce reliance on fossil fuels around which questions still persist about their contribution to climate and long-term availability. Monolithic triple-junction solar cells are currently the state of the art photovoltaic devices with champion cell efficiencies exceeding 40%, but their ultimate efficiency is restricted by the current-matching constraint of series-connected cells. The objective of this thesis was to investigate the use of solar cells with lattice constants equal to InP in order to reduce the constraint of current matching in multi-junction solar cells. This was addressed by two approaches: Firstly, the formation of mechanically stacked solar cells (MSSC) was investigated through the addition of separate connections to individual cells that make up a multi-junction device. An electrical and optical modelling approach identified separately connected InGaAs bottom cells stacked under dual-junction GaAs based top cells as a route to high efficiency. An InGaAs solar cell was fabricated on an InP substrate with a measured 1-Sun conversion efficiency of 9.3%. A comparative study of adhesives found benzocyclobutene to be the most suitable for bonding component cells in a mechanically stacked configuration owing to its higher thermal conductivity and refractive index when compared to other candidate adhesives. A flip-chip process was developed to bond single-junction GaAs and InGaAs cells with a measured 4-terminal MSSC efficiency of 25.2% under 1-Sun conditions. Additionally, a novel InAlAs solar cell was identified, which can be used to provide an alternative to the well established GaAs solar cell. As wide bandgap InAlAs solar cells have not been extensively investigated for use in photovoltaics, single-junction cells were fabricated and their properties relevant to PV operation analysed. Minority carrier diffusion lengths in the micrometre range were extracted, confirming InAlAs as a suitable material for use in III-V solar cells, and a 1-Sun conversion efficiency of 6.6% measured for cells with 800 nm thick absorber layers. Given the cost and small diameter of commercially available InP wafers, InGaAs and InAlAs solar cells were fabricated on alternative substrates, namely GaAs. As a first demonstration the lattice constant of a GaAs substrate was graded to InP using an InxGa1-xAs metamorphic buffer layer onto which cells were grown. This was the first demonstration of an InAlAs solar cell on an alternative substrate and an initial step towards fabricating these cells on Si. The results presented offer a route to developing multi-junction solar cell devices based on the InP lattice parameter, thus extending the range of available bandgaps for high efficiency cells.

The emerging strategic partnership between the European Union and the African Union

Many among the emerging generation of political elites in Africa see the role the European Union (EU) plays in the maintenance of an unprecedented period of peace in Western Europe as an inspirational example of the manner in which the African Union (AU) can contribute to peace and stability in Africa. This doctoral thesis examines security cooperation between the EU and the AU, with a particular focus on the nature and substance of that cooperation. It suggests that despite the establishment of various EU–AU institutions and ties with a role in security policy and cooperation, such security cooperation is limited in substance. This study argues that EU–AU security cooperation is especially constrained by the emergence of alternative partners, most notably China, and by failures of implementation and follow-through. Two case studies, the first dealing with EU–AU cooperation in peacekeeping, and the second addressing the silent water crisis along with the link between water and security, have been analysed in detail to determine the effectiveness and sustainability of the EU–AU partnership. A number of important lessons for regionalism, interregionalism and multilateralism are drawn from the bond between the EU and the AU. This doctoral thesis will prove that, despite an emphasis on the problematic term ‘strategic’ by both EU and AU policymakers, EU–AU cooperation is limited and somewhat lacking in strategic direction. The cooperation between the EU and the AU focuses mainly on EU financial support for AU peacekeeping and specific projects in Africa (e.g. in the water sector), as well as on a limited political dialogue. Nonetheless, the EU–AU link represents the most comprehensive partnership the AU has with any non-African actor. This study will furthermore demonstrate that the United Nations (UN) is an indispensable third-party to their relationship and it is therefore more appropriate to speak of the AU–EU–UN nexus. This doctoral thesis concludes that the AU–EU–UN nexus is an important example of interregionalism in a global context and that such interregionalism is an important emerging part of global governance.

Integration of micro- and macroscopic models for pedestrian evacuation simulation

Simulation of pedestrian evacuations of smart buildings in emergency is a powerful tool for building analysis, dynamic evacuation planning and real-time response to the evolving state of evacuations. Macroscopic pedestrian models are low-complexity models that are and well suited to algorithmic analysis and planning, but are quite abstract. Microscopic simulation models allow for a high level of simulation detail but can be computationally intensive. By combining micro- and macro- models we can use each to overcome the shortcomings of the other and enable new capability and applications for pedestrian evacuation simulation that would not be possible with either alone. We develop the EvacSim multi-agent pedestrian simulator and procedurally generate macroscopic flow graph models of building space, integrating micro- and macroscopic approaches to simulation of the same emergency space. By “coupling” flow graph parameters to microscopic simulation results, the graph model captures some of the higher detail and fidelity of the complex microscopic simulation model. The coupled flow graph is used for analysis and prediction of the movement of pedestrians in the microscopic simulation, and investigate the performance of dynamic evacuation planning in simulated emergencies using a variety of strategies for allocation of macroscopic evacuation routes to microscopic pedestrian agents. The predictive capability of the coupled flow graph is exploited for the decomposition of microscopic simulation space into multiple future states in a scalable manner. By simulating multiple future states of the emergency in short time frames, this enables sensing strategy based on simulation scenario pattern matching which we show to achieve fast scenario matching, enabling rich, real-time feedback in emergencies in buildings with meagre sensing capabilities.