Development of a general internet attitude scale and internet self-efficacy scale

The measurement of users’ attitudes towards and confidence with using the Internet is an important yet poorly researched topic. Previous research has encountered issues that serve to obfuscate rather than clarify. Such issues include a lack of distinction between the terms ‘attitude’ and ‘self-efficacy’, the absence of a theoretical framework to measure each concept, and failure to follow well-established techniques for the measurement of both attitude and self-efficacy. Thus, the primary aim of this research was to develop two statistically reliable scales which independently measure attitudes towards the Internet and Internet self-efficacy. This research addressed the outlined issues by applying appropriate theoretical frameworks to each of the constructs under investigation. First, the well-known three component (affect, behaviour, cognition) model of attitudes was applied to previous Internet attitude statements. The scale was distributed to four large samples of participants. Exploratory factor analyses revealed four underlying factors in the scale: Internet Affect, Internet Exhilaration, Social Benefit of the Internet and Internet Detriment. The final scale contains 21 items, demonstrates excellent reliability and achieved excellent model fit in the confirmatory factor analysis. Second, Bandura’s (1997) model of self-efficacy was followed to develop a reliable measure of Internet self-efficacy. Data collected as part of this research suggests that there are ten main activities which individuals can carry out on the Internet. Preliminary analyses suggested that self-efficacy is confounded with previous experience; thus, individuals were invited to indicate how frequently they performed the listed Internet tasks in addition to rating their feelings of self-efficacy for each task. The scale was distributed to a sample of 841 participants. Results from the analyses suggest that the more frequently an individual performs an activity on the Internet, the higher their self-efficacy score for that activity. This suggests that frequency of use ought to be taken into account in individual’s self-efficacy scores to obtain a ‘true’ self-efficacy score for the individual. Thus, a formula was devised to incorporate participants’ previous experience of Internet tasks in their Internet self-efficacy scores. This formula was then used to obtain an overall Internet self-efficacy score for participants. Following the development of both scales, gender and age differences were explored in Internet attitudes and Internet self-efficacy scores. The analyses indicated that there were no gender differences between groups for Internet attitude or Internet self-efficacy scores. However, age group differences were identified for both attitudes and self-efficacy. Individuals aged 25-34 years achieved the highest scores on both the Internet attitude and Internet self-efficacy measures. Internet attitude and self-efficacy scores tended to decrease with age with older participants achieving lower scores on both measures than younger participants. It was also found that the more exposure individuals had to the Internet, the higher their Internet attitude and Internet self-efficacy scores. Examination of the relationship between attitude and self-efficacy found a significantly positive relationship between the two measures suggesting that the two constructs are related. Implication of such findings and directions for future research are outlined in detail in the Discussion section of this thesis.

Self-neglect: development and evaluation of a self-neglect (SN-37) measurement instrument

Aim: To develop and evaluate the psychometric properties of an instrument for the measurement of self-neglect (SN).Conceptual Framework: An elder self-neglect (ESN) conceptual framework guided the literature review and scale development. The framework has two key dimensions physical/psycho-social and environmental and seven sub dimensions which are representative of the factors that can contribute to intentional and unintentional SN. Methods: A descriptive cross-sectional design was adopted to achieve the research aim. The study was conducted in two phases. Phase 1 involved the development of the questionnaire content and structure. Phase 2 focused on establishing the psychometric properties of the instrument. Content validity was established by a panel of 8 experts and piloted with 9 health and social care professionals. The instrument was subsequently posted with a stamped addressed envelope to 566 health and social care professionals who met specific eligibility criteria across the four HSE areas. A total of 341 questionnaires were returned, a response rate of 60% and 305 (50%) completed responses were included in exploratory factor analysis (EFA). Item and factor analyses were performed to elicit the instruments underlying factor structure and establish preliminary construct validity. Findings: Item and factor analyses resulted in a logically coherent, 37 items, five factor solution, explaining 55.6% of the cumulative variance. The factors were labelled: ‘Environment’, ‘Social Networks’, ‘Emotional and Behavioural Liability’, ‘Health Avoidance’ and ‘Self-Determinism’. The factor loadings were >0.40 for all items on each of the five subscales. Preliminary construct validity was supported by findings. Conclusion: The main outcome of this research is a 37 item Self-Neglect (SN-37) measurement instrument that was developed by EFA and underpinned by an ESN conceptual framework. Preliminary psychometric evaluation of the instrument is promising. Future work should be directed at establishing the construct and criterion related validity of the instrument.

Development of large-scale colloidal crystallisation methods for the production of photonic crystals

Colloidal photonic crystals have potential light manipulation applications including; fabrication of efficient lasers and LEDs, improved optical sensors and interconnects, and improving photovoltaic efficiencies. One road-block of colloidal selfassembly is their inherent defects; however, they can be manufactured cost effectively into large area films compared to micro-fabrication methods. This thesis investigates production of ‘large-area’ colloidal photonic crystals by sonication, under oil co-crystallization and controlled evaporation, with a view to reducing cracking and other defects. A simple monotonic Stöber particle synthesis method was developed producing silica particles in the range of 80 to 600nm in a single step. An analytical method assesses the quality of surface particle ordering in a semiquantitative manner was developed. Using fast Fourier transform (FFT) spot intensities, a grey scale symmetry area method, has been used to quantify the FFT profiles. Adding ultrasonic vibrations during film formation demonstrated large areas could be assembled rapidly, however film ordering suffered as a result. Under oil cocrystallisation results in the particles being bound together during film formation. While having potential to form large areas, it requires further refinement to be established as a production technique. Achieving high quality photonic crystals bonded with low concentrations (<5%) of polymeric adhesives while maintaining refractive index contrast, proved difficult and degraded the film’s uniformity. A controlled evaporation method, using a mixed solvent suspension, represents the most promising method to produce high quality films over large areas, 75mm x 25mm. During this mixed solvent approach, the film is kept in the wet state longer, thus reducing cracks developing during the drying stage. These films are crack-free up to a critical thickness, and show very large domains, which are visible in low magnification SEM images as Moiré fringe patterns. Higher magnification reveals separation between alternate fringe patterns are domain boundaries between individual crystalline growth fronts.

The broad-scale distribution and abundance of Scyphomedusae in Irish waters

Scyphomedusae are receiving increasing recognition as key components of marine ecosystems. However, information on their distribution and abundance beyond coastal waters is generally lacking. Organising access to such data is critical to effectively transpose findings from laboratory, mesocosm and small scale studies to the scale of ecological processes. These data are also required to identify the risks of detrimental impacts of jellyfish blooms on human activities. In Ireland, such risks raise concerns among the public, but foremost amongst the professionals of the aquaculture and fishing sectors. The present work looked at the opportunity to get access to new information on the distribution of jellyfish around Ireland mostly by using existing infrastructures and programmes. The analysis of bycatch data collected during the Irish groundfish surveys provided new insights into the distribution of Pelagia noctiluca over an area >160 000 km2, a scale never reached before in a region of the Northeast Atlantic (140 sampling stations). Similarly, 4 years of data collected during the Irish Sea juvenile gadoid fish survey provided the first spatially, explicit, information on the abundance of Aurelia aurita and Cyanea spp. (Cyanea capillata and Cyanea lamarckii) throughout the Irish Sea (> 200 sampling events). In addition, the use of ships of opportunity allowed repeated samplings (N = 37) of an >100 km long transect between Dublin (Ireland) and Holyhead (Wales, UK), therefore providing two years of seasonal monitoring of the occurrence of scyphomedusae in that region. Finally, in order to inform the movements of C. capillata in an area where many negative interactions with bathers occur, the horizontal and vertical movements of 5 individual C. capillata were investigated through acoustic tracking.

Accommodating curvature in a highly ordered functionalized metal oxide nanofiber: synthesis, characterization and multi-scale modeling of layered nanosheets

A key element in the rational design of hybrid organic-inorganic nanostructures, is control of surfactant packing and adsorption onto the inorganic phase in crystal growth and assembly. In layered single crystal nanofibers and bilayered 2D nanosheets of vanadium oxide, we show how the chemisorption of preferred densities of surfactant molecules can direct formation of ordered, curved layers. The atom-scale features of the structures are described using molecular dynamics simulations that quantify surfactant packing effects and confirm the preference for a density of 5 dodecanethiol molecules per 8 vanadium attachment sites in the synthesised structures. This assembly maintains a remarkably well ordered interlayer spacing, even when curved. The assemblies of interdigitated organic bilayers on V2O5 are shown to be sufficiently flexible to tolerate curvature while maintaining a constant interlayer distance without rupture, delamination or cleavage. The accommodation of curvature and invariant structural integrity points to a beneficial role for oxide-directed organic film packing effects in layered architectures such as stacked nanofibers and hybrid 2D nanosheet systems.

Development of germanium/silicon integration for near infrared detection

Silicon (Si) is the base material for electronic technologies and is emerging as a very attractive platform for photonic integrated circuits (PICs). PICs allow optical systems to be made more compact with higher performance than discrete optical components. Applications for PICs are in the area of fibre-optic communication, biomedical devices, photovoltaics and imaging. Germanium (Ge), due to its suitable bandgap for telecommunications and its compatibility with Si technology is preferred over III-V compounds as an integrated on-chip detector at near infrared wavelengths. There are two main approaches for Ge/Si integration: through epitaxial growth and through direct wafer bonding. The lattice mismatch of ~4.2% between Ge and Si is the main problem of the former technique which leads to a high density of dislocations while the bond strength and conductivity of the interface are the main challenges of the latter. Both result in trap states which are expected to play a critical role. Understanding the physics of the interface is a key contribution of this thesis. This thesis investigates Ge/Si diodes using these two methods. The effects of interface traps on the static and dynamic performance of Ge/Si avalanche photodetectors have been modelled for the first time. The thesis outlines the original process development and characterization of mesa diodes which were fabricated by transferring a ~700 nm thick layer of p-type Ge onto n-type Si using direct wafer bonding and layer exfoliation. The effects of low temperature annealing on the device performance and on the conductivity of the interface have been investigated. It is shown that the diode ideality factor and the series resistance of the device are reduced after annealing. The carrier transport mechanism is shown to be dominated by generation–recombination before annealing and by direct tunnelling in forward bias and band-to-band tunnelling in reverse bias after annealing. The thesis presents a novel technique to realise photodetectors where one of the substrates is thinned by chemical mechanical polishing (CMP) after bonding the Si-Ge wafers. Based on this technique, Ge/Si detectors with remarkably high responsivities, in excess of 3.5 A/W at 1.55 μm at −2 V, under surface normal illumination have been measured. By performing electrical and optical measurements at various temperatures, the carrier transport through the hetero-interface is analysed by monitoring the Ge band bending from which a detailed band structure of the Ge/Si interface is proposed for the first time. The above unity responsivity of the detectors was explained by light induced potential barrier lowering at the interface. To our knowledge this is the first report of light-gated responsivity for vertically illuminated Ge/Si photodiodes. The wafer bonding approach followed by layer exfoliation or by CMP is a low temperature wafer scale process. In principle, the technique could be extended to other materials such as Ge on GaAs, or Ge on SOI. The unique results reported here are compatible with surface normal illumination and are capable of being integrated with CMOS electronics and readout units in the form of 2D arrays of detectors. One potential future application is a low-cost Si process-compatible near infrared camera.

Development of CMOS-compatible electrostatic supercapacitors

This work focuses on development of electrostatic supercapacitors (ESCs) using process routes compatible with complementary metal–oxide–semiconductor (CMOS) fabrication. Wafer-scale anodised aluminium oxide (AAO) processing techniques have been developed to produce high-surface area templates. Statistically optimised atomic layer deposition (ALD) processes have been developed to conformally coat the templates and generate metalinsulator-metal capacitor structures. Detailed electrical characterisation and analysis for a range of devices, revealed ESC’s with high capacitance densities of ~12 μF cm-2 and equivalent energy densities of 0.28 Wh/kg . Finally the suitability of ESC’s toward next generation energy storage applications is discussed.

Form-focused instruction in Irish-medium immersion education: a critical examination of teachers' perspectives and practices. A small-scale qualitative case study

It has been suggested that the less than optimal levels of students’ immersion language “persist in part because immersion teachers lack systematic approaches for integrating language into their content instruction” (Tedick, Christian and Fortune, 2011, p.7). I argue that our current lack of knowledge regarding what immersion teachers think, know and believe and what immersion teachers’ actual ‘lived’ experiences are in relation to form-focused instruction (FFI) prevents us from fully understanding the key issues at the core of experiential immersion pedagogy and form-focused integration. FFI refers to “any planned or incidental instructional activity that is intended to induce language learners to pay attention to linguistic form” (Ellis, 2001b, p.1). The central aim of this research study is to critically examine the perspectives and practices of Irish-medium immersion (IMI) teachers in relation to FFI. The study ‘taps’ into the lived experiences of three IMI teachers in three different IMI school contexts and explores FFI from a classroom-based, teacher-informed perspective. Philosophical underpinnings of the interpretive paradigm and critical hermeneutical principles inform and guide the study. A multi-case study approach was adopted and data was gathered through classroom observation, video-stimulated recall and semistructured interviews. Findings revealed that the journey of ‘becoming’ an IMI teacher is shaped by a vast array of intricate variables. IMI teacher identity, implicit theories, stated beliefs, educational biographies and experiences, IMI school cultures and contexts as well as teacher knowledge and competence impacted on IMI teachers’ FFI perspectives and practices. An IMI content teacher identity reflected the teachers’ priorities as shaped by pedagogical challenges and their educational backgrounds. While research participants had clearly defined instructional beliefs and goals, their roadmap of how to actually accomplish these goals was far from clear. IMI teachers described the multitude of choices and pedagogical dilemmas they faced in integrating FFI into experiential pedagogy. Significant gaps in IMI teachers’ declarative knowledge about and competence in the immersion language were also reported. This research study increases our understanding of the complexity of the processes underlying and shaping FFI pedagogy in IMI education. Innovative FFI opportunities for professional development across the continuum of teacher education are outlined, a comprehensive evaluation of IMI is called for and areas for further research are delineated.

Development of low-cost sensing and separation devices based on macro, micro and nano technology for health applications

The work presented in this thesis described the development of low-cost sensing and separation devices with electrochemical detections for health applications. This research employs macro, micro and nano technology. The first sensing device developed was a tonerbased micro-device. The initial development of microfluidic devices was based on glass or quartz devices that are often expensive to fabricate; however, the introduction of new types of materials, such as plastics, offered a new way for fast prototyping and the development of disposable devices. One such microfluidic device is based on the lamination of laser-printed polyester films using a computer, printer and laminator. The resulting toner-based microchips demonstrated a potential viability for chemical assays, coupled with several detection methods, particularly Chip-Electrophoresis-Chemiluminescence (CE-CL) detection which has never been reported in the literature. Following on from the toner-based microchip, a three-electrode micro-configuration was developed on acetate substrate. This is the first time that a micro-electrode configuration made from gold; silver and platinum have been fabricated onto acetate by means of patterning and deposition techniques using the central fabrication facilities in Tyndall National Institute. These electrodes have been designed to facilitate the integration of a 3- electrode configuration as part of the fabrication process. Since the electrodes are on acetate the dicing step can automatically be eliminated. The stability of these sensors has been investigated using electrochemical techniques with excellent outcomes. Following on from the generalised testing of the electrodes these sensors were then coupled with capillary electrophoresis. The final sensing devices were on a macro scale and involved the modifications of screenprinted electrodes. Screen-printed electrodes (SPE) are generally seen to be far less sensitive than the more expensive electrodes including the gold, boron-doped diamond and glassy carbon electrodes. To enhance the sensitivity of these electrodes they were treated with metal nano-particles, gold and palladium. Following on from this, another modification was introduced. The carbonaceous material carbon monolith was drop-cast onto the SPE and then the metal nano-particles were electrodeposited onto the monolith material

Development and psychometric evaluation of the spirituality instrument (SpI-27) in a sample of people with chronic illness

Background: Spirituality is fundamental to all human beings, existing within a person, and developing until death. This research sought to operationalise spirituality in a sample of individuals with chronic illness. A review of the conceptual literature identified three dimensions of spirituality: connectedness, transcendence, and meaning in life. A review of the empirical literature identified one instrument that measures the three dimensions together. Yet, recent appraisals of this instrument highlighted issues with item formulation and limited evidence of reliability and validity. Aim: The aim of this research was to develop a theoretically-grounded instrument to measure spirituality – the Spirituality Instrument-27 (SpI-27). A secondary aim was to psychometrically evaluate this instrument in a sample of individuals with chronic illness (n=249). Methods: A two-phase design was adopted. Phase one consisted of the development of the SpI-27 based on item generation from a concept analysis, a literature review, and an instrument appraisal. The second phase established the psychometric properties of the instrument and included: a qualitative descriptive design to establish content validity; a pilot study to evaluate the mode of administration; and a descriptive correlational design to assess the instrument’s reliability and validity. Data were analysed using SPSS (Version 18). Results: Results of exploratory factor analysis concluded a final five-factor solution with 27 items. These five factors were labelled: Connectedness with Others, Self-Transcendence, Self-Cognisance, Conservationism, and Connectedness with a Higher Power. Cronbach’s alpha coefficients ranged from 0.823 to 0.911 for the five factors, and 0.904 for the overall scale, indicating high internal consistency. Paired-sample t-tests, intra-class correlations, and weighted kappa values supported the temporal stability of the instrument over 2 weeks. A significant positive correlation was found between the SpI-27 and the Spirituality Index of Well-Being, providing evidence for convergent validity. Conclusion: This research addresses a call for a theoretically-grounded instrument to measure spirituality.

An exploration of the impact of the Green-Schools programme on the development of sustainable behaviours in the home

Concern for the sustainability of our planet is widespread. The ever-increasing economic activity and large scale industralisation our consumer society requires has increased concerns among academics, politicians, and consumers alike on natural resource depletion, waste management, dangers of toxic chemicals, and climate change. Human consumption is causing major issues for the space we inhabit. Much work has been done over the past four decades to remedy human impact on our environment at corporate, policy and consumer level. But concerns on our ability to progress the sustainability agenda remain. Consumer behaviour plays a pivotal role in sustainable development. In light of this, we need to explore and understand the ways in which consumption occurs in consumers lives, with an aim to changing behaviours that do not support the natural environment. Questions on how to change consumer behaviour dominate much of the literature on sustainable consumption, but substantial behaviour change among individuals has not occurred as predicted. Some focus has shifted to look at upstream interventions, such as education. The Green-Schools Programme (known internationally as Eco-Schools) is one such intervention. The aim of this thesis was to explore consumption in the context of the Green-Schools Programme. The main research question asks: in the context of the Green-Schools, how are sustainable behaviour practices developed in the home? The findings presented in this thesis show that sustainable behaviour has developed in the home from both internal and external factors, the Green-Schools effect being one such factor; the programme does influence behaviour in the home context to some degree. One of the main findings of this research indicates that schoolchildren are imparting ‘positive pester power’ on household behaviour practices and the majority of households are passively practicing sustainable consumption. These findings contribute to knowledge on sustainable consumption in the home context.