The broad-scale distribution and abundance of Scyphomedusae in Irish waters

Scyphomedusae are receiving increasing recognition as key components of marine ecosystems. However, information on their distribution and abundance beyond coastal waters is generally lacking. Organising access to such data is critical to effectively transpose findings from laboratory, mesocosm and small scale studies to the scale of ecological processes. These data are also required to identify the risks of detrimental impacts of jellyfish blooms on human activities. In Ireland, such risks raise concerns among the public, but foremost amongst the professionals of the aquaculture and fishing sectors. The present work looked at the opportunity to get access to new information on the distribution of jellyfish around Ireland mostly by using existing infrastructures and programmes. The analysis of bycatch data collected during the Irish groundfish surveys provided new insights into the distribution of Pelagia noctiluca over an area >160 000 km2, a scale never reached before in a region of the Northeast Atlantic (140 sampling stations). Similarly, 4 years of data collected during the Irish Sea juvenile gadoid fish survey provided the first spatially, explicit, information on the abundance of Aurelia aurita and Cyanea spp. (Cyanea capillata and Cyanea lamarckii) throughout the Irish Sea (> 200 sampling events). In addition, the use of ships of opportunity allowed repeated samplings (N = 37) of an >100 km long transect between Dublin (Ireland) and Holyhead (Wales, UK), therefore providing two years of seasonal monitoring of the occurrence of scyphomedusae in that region. Finally, in order to inform the movements of C. capillata in an area where many negative interactions with bathers occur, the horizontal and vertical movements of 5 individual C. capillata were investigated through acoustic tracking.

High-efficiency photovoltaics through mechanically stacked integration of solar cells based on the InP lattice constant

Solar Energy is a clean and abundant energy source that can help reduce reliance on fossil fuels around which questions still persist about their contribution to climate and long-term availability. Monolithic triple-junction solar cells are currently the state of the art photovoltaic devices with champion cell efficiencies exceeding 40%, but their ultimate efficiency is restricted by the current-matching constraint of series-connected cells. The objective of this thesis was to investigate the use of solar cells with lattice constants equal to InP in order to reduce the constraint of current matching in multi-junction solar cells. This was addressed by two approaches: Firstly, the formation of mechanically stacked solar cells (MSSC) was investigated through the addition of separate connections to individual cells that make up a multi-junction device. An electrical and optical modelling approach identified separately connected InGaAs bottom cells stacked under dual-junction GaAs based top cells as a route to high efficiency. An InGaAs solar cell was fabricated on an InP substrate with a measured 1-Sun conversion efficiency of 9.3%. A comparative study of adhesives found benzocyclobutene to be the most suitable for bonding component cells in a mechanically stacked configuration owing to its higher thermal conductivity and refractive index when compared to other candidate adhesives. A flip-chip process was developed to bond single-junction GaAs and InGaAs cells with a measured 4-terminal MSSC efficiency of 25.2% under 1-Sun conditions. Additionally, a novel InAlAs solar cell was identified, which can be used to provide an alternative to the well established GaAs solar cell. As wide bandgap InAlAs solar cells have not been extensively investigated for use in photovoltaics, single-junction cells were fabricated and their properties relevant to PV operation analysed. Minority carrier diffusion lengths in the micrometre range were extracted, confirming InAlAs as a suitable material for use in III-V solar cells, and a 1-Sun conversion efficiency of 6.6% measured for cells with 800 nm thick absorber layers. Given the cost and small diameter of commercially available InP wafers, InGaAs and InAlAs solar cells were fabricated on alternative substrates, namely GaAs. As a first demonstration the lattice constant of a GaAs substrate was graded to InP using an InxGa1-xAs metamorphic buffer layer onto which cells were grown. This was the first demonstration of an InAlAs solar cell on an alternative substrate and an initial step towards fabricating these cells on Si. The results presented offer a route to developing multi-junction solar cell devices based on the InP lattice parameter, thus extending the range of available bandgaps for high efficiency cells.

Mechanically stacked solar cells for concentrator photovoltaics

The power output of dual-junction mechanically stacked solar cells comprising different sub-cell materials in a terrestrial concentrating photovoltaic module has been evaluated. The ideal bandgap combination of both cells in a stack was found using EtaOpt. A combination of 1.4 eV and 0.7 eV has been found to produce the highest photovoltaic conversion efficiency under the AM1.5 Direct Solar Spectrum with x500 concentration. As EtaOpt does not consider the absorption profile of solar cell materials; the practical power output per unit area of a dual junction mechanically stacked solar cell has been modelled considering the optical absorption co-efficients and thicknesses of the individual solar cells. The model considered a GaAs top cell and a Ge, GaSb, Ga0.47In0.53As or Si bottom cell. It was found that GaSb gives the highest power contribution as a bottom cell in a dual junction configuration followed by Ge and GaInAs. While the additional power provided by a Si bottom cell is less than these it remains a suitable candidate for a bottom cell owing to its lower cost