Group problem-solving skills training for self-harm: randomised controlled trial

Background: Rates of self-harm are high and have recently increased. This trend and the repetitive nature of self-harm pose a significant challenge to mental health services. Aims: To determine the efficacy of a structured group problem-solving skills training (PST) programme as an intervention approach for self-harm in addition to treatment as usual (TAU) as offered by mental health services. Method: A total of 433 participants (aged 18-64 years) were randomly assigned to TAU plus PST or TAU alone. Assessments were carried out at baseline and at 6-week and 6-month follow-up and repeated hospital-treated self-harm was ascertained at 12-month follow-up. Results: The treatment groups did not differ in rates of repeated self-harm at 6-week, 6-month and 12-month follow-up. Both treatment groups showed significant improvements in psychological and social functioning at follow-up. Only one measure (needing and receiving practical help from those closest to them) showed a positive treatment effect at 6-week (P = 0.004) and 6-month (P = 0.01) follow-up. Repetition was not associated with waiting time in the PST group. Conclusions: This brief intervention for self-harm is no more effective than treatment as usual. Further work is required to establish whether a modified, more intensive programme delivered sooner after the index episode would be effective.

Reporting on data monitoring committees in neonatal randomised controlled trials is inconsistent

Aim: To evaluate the reported use of Data Monitoring Committees (DMCs), the frequency of interim analysis, pre-specified stopping rules and early trial termination in neonatal randomised controlled trials (RCTs). Methods: We reviewed neonatal RCTs published in four high impact general medical journals, specifically looking at safety issues including documented involvement of a DMC, stated interim analysis, stopping rules and early trial termination. We searched all journal issues over an 11-year period (2003-2013) and recorded predefined parameters on each item for RCTs meeting inclusion criteria. Results: Seventy neonatal trials were identified in four general medical journals: Lancet, New England Journal of Medicine (NEJM), British Medical Journal and Journal of American Medical Association (JAMA). 43 (61.4%) studies reported the presence of a DMC, 36 (51.4%) explicitly mentioned interim analysis; stopping rules were reported in 15 (21.4%) RCTs and 7 (10%) trials were terminated early. The NEJM most frequently reported these parameters compared to the other three journals reviewed. Conclusion: While the majority of neonatal RCTs report on DMC involvement and interim analysis there is still scope for improvement. Clear documentation of safety related issues should be a central component of reporting in neonatal trials involving newborn infants.

Development of a general internet attitude scale and internet self-efficacy scale

The measurement of users’ attitudes towards and confidence with using the Internet is an important yet poorly researched topic. Previous research has encountered issues that serve to obfuscate rather than clarify. Such issues include a lack of distinction between the terms ‘attitude’ and ‘self-efficacy’, the absence of a theoretical framework to measure each concept, and failure to follow well-established techniques for the measurement of both attitude and self-efficacy. Thus, the primary aim of this research was to develop two statistically reliable scales which independently measure attitudes towards the Internet and Internet self-efficacy. This research addressed the outlined issues by applying appropriate theoretical frameworks to each of the constructs under investigation. First, the well-known three component (affect, behaviour, cognition) model of attitudes was applied to previous Internet attitude statements. The scale was distributed to four large samples of participants. Exploratory factor analyses revealed four underlying factors in the scale: Internet Affect, Internet Exhilaration, Social Benefit of the Internet and Internet Detriment. The final scale contains 21 items, demonstrates excellent reliability and achieved excellent model fit in the confirmatory factor analysis. Second, Bandura’s (1997) model of self-efficacy was followed to develop a reliable measure of Internet self-efficacy. Data collected as part of this research suggests that there are ten main activities which individuals can carry out on the Internet. Preliminary analyses suggested that self-efficacy is confounded with previous experience; thus, individuals were invited to indicate how frequently they performed the listed Internet tasks in addition to rating their feelings of self-efficacy for each task. The scale was distributed to a sample of 841 participants. Results from the analyses suggest that the more frequently an individual performs an activity on the Internet, the higher their self-efficacy score for that activity. This suggests that frequency of use ought to be taken into account in individual’s self-efficacy scores to obtain a ‘true’ self-efficacy score for the individual. Thus, a formula was devised to incorporate participants’ previous experience of Internet tasks in their Internet self-efficacy scores. This formula was then used to obtain an overall Internet self-efficacy score for participants. Following the development of both scales, gender and age differences were explored in Internet attitudes and Internet self-efficacy scores. The analyses indicated that there were no gender differences between groups for Internet attitude or Internet self-efficacy scores. However, age group differences were identified for both attitudes and self-efficacy. Individuals aged 25-34 years achieved the highest scores on both the Internet attitude and Internet self-efficacy measures. Internet attitude and self-efficacy scores tended to decrease with age with older participants achieving lower scores on both measures than younger participants. It was also found that the more exposure individuals had to the Internet, the higher their Internet attitude and Internet self-efficacy scores. Examination of the relationship between attitude and self-efficacy found a significantly positive relationship between the two measures suggesting that the two constructs are related. Implication of such findings and directions for future research are outlined in detail in the Discussion section of this thesis.

Self-management education for cystic fibrosis

Background: Self-management education may help patients with cystic fibrosis and their families to choose, monitor and adjust treatment requirements for their illness, and also to manage the effects of illness on their lives. Although self-management education interventions have been developed for cystic fibrosis, no previous systematic review of the evidence of effectiveness of these interventions has been conducted. Objectives: To assess the effects of self-management education interventions on improving health outcomes for patients with cystic fibrosis and their caregivers. Search methods: We searched the Cochrane Cystic Fibrosis and Genetic Disorders Group Trials Register (date of the last search: 22 August 2013). We also searched databases through EBSCO (CINAHL; Psychological and Behavioural Sciences Collection; PsychInfo; SocINDEX) and Elsevier (Embase) and handsearched relevant journals and conference proceedings (date of the last searches: 01 February 2014 ). Selection criteria: Randomised controlled trials, quasi-randomised controlled trials or controlled clinical trials comparing different types of self-management education for cystic fibrosis or comparing self-management education with standard care or no intervention. Data collection and analysis: Two authors assessed trial eligibility and risk of bias. Three authors extracted data. Main results: Four trials (involving a total of 269 participants) were included. The participants were children with cystic fibrosis and their parents or caregivers in three trials and adults with cystic fibrosis in one trial. The trials compared four different self-management education interventions versus standard treatment: (1) a training programme for managing cystic fibrosis in general; (2) education specific to aerosol and airway clearance treatments; (3) disease-specific nutrition education; and (4) general and disease-specific nutrition education. Training children to manage cystic fibrosis in general had no statistically significant effects on weight after six to eight weeks, mean difference -7.74 lb (i.e. 3.51 kg) (95% confidence interval -35.18 to 19.70). General and disease-specific nutrition education for adults had no statistically significant effects on: pulmonary function (forced expiratory volume at one second), mean difference -5.00 % (95% confidence interval -18.10 to 8.10) at six months and mean difference -5.50 % (95% confidence interval -18.46 to 7.46) at 12 months; or weight, mean difference - 0.70 kg (95% confidence interval -6.58 to 5.18) at six months and mean difference -0.70 kg (95% confidence interval -6.62 to 5.22) at 12 months; or dietary fat intake scores, mean difference 1.60 (85% confidence interval -2.90 to 6.10) at six months and mean difference 0.20 (95% confidence interval -4.08 to 4.48) at 12 months. There is some limited evidence to suggest that self-management education may improve knowledge in patients with cystic fibrosis but not in parents or caregivers. There is also some limited evidence to suggest that self-management education may result in positively changing a small number of behaviours in both patients and caregivers. Authors' conclusions: The available evidence from this review is of insufficient quantity and quality to draw any firm conclusions about the effects of self-management education for cystic fibrosis. Further trials are needed to investigate the effects of self-management education on a range of clinical and behavioural outcomes in children, adolescents and adults with cystic fibrosis and their caregivers.

Highly sensitive surface enhanced Raman scattering (SERS) detection platforms formed by large area self-assembled Au nanorod arrays

This thesis explores a new method to fabricate SERS detection platforms formed by large area self-assembled Au nanorod arrays. For the fabrication of these new SERS platforms a new droplet deposition method for the self-assembly of Au nanorods was developed. The method, based in the controlled evaporation of organic suspensions of Au nanorods, was used for the fabrication of horizontal and vertical arrays of Au nanorods over large areas (100μm2). The fabricated nanorods arrays showed a high degree of order measured by SEM and optical microscopy over mm2 areas, but unfortunately they detached from the support when immersed in any analyte solutions. In order to improve adhesion of arrays to the support and clean off residual organic matter, we introduced an additional stamping process. The stamping process allows the immobilization of the arrays on different flexible and rigid substrates, whose feasibility as SERS platforms were tested satisfactory with the model molecule 4ABT. Following the feasibility study, the substrates were used for the detection of the food contaminant Crystal Violet and the drug analogue Benzocaine as examples of recognition of health menaces in real field applications.

Study of the kinetics and mechanism of rapid self-assembly in block copolymer thin films during solvo-microwave annealing

Microwave annealing is an emerging technique for achieving ordered patterns of block copolymer films on substrates. Little is understood about the mechanisms of microphase separation during the microwave annealing process and how it promotes the microphase separation of the blocks. Here, we use controlled power microwave irradiation in the presence of tetrahydrofuran (THF) solvent, to achieve lateral microphase separation in high- lamellar-forming poly(styrene-b-lactic acid) PS-b-PLA. A highly ordered line pattern was formed within seconds on silicon, germanium and silicon on insulator (SOI) substrates. In-situ temperature measurement of the silicon substrate coupled to condition changes during "solvo-microwave" annealing allowed understanding of the processes to be attained. Our results suggest that the substrate has little effect on the ordering process and is essentially microwave transparent but rather, it is direct heating of the polar THF molecules that causes microphase separation. It is postulated that the rapid interaction of THF with microwaves and the resultant temperature increase to 55 degrees C within seconds causes an increase of the vapor pressure of the solvent from 19.8 to 70 kPa. This enriched vapor environment increases the plasticity of both PS and PLA chains and leads to the fast self-assembly kinetics. Comparing the patterns formed on silicon, germanium and silicon on insulator (SOI) and also an in situ temperature measurement of silicon in the oven confirms the significance of the solvent over the role of substrate heating during "solvo-microwave" annealing. Besides the short annealing time which has technological importance, the coherence length is on a micron scale and dewetting is not observed after annealing. The etched pattern (PLA was removed by an Ar/O-2 reactive ion etch) was transferred to the underlying silicon substrate fabricating sub-20 nm silicon nanowires over large areas demonstrating that the morphology is consistent both across and through the film.

Droplet etching of deep nanoholes for filling with self-aligned complex quantum structures

Strain-free epitaxial quantum dots (QDs) are fabricated by a combination of Al local droplet etching (LDE) of nanoholes in AlGaAs surfaces and subsequent hole filling with GaAs. The whole process is performed in a conventional molecular beam epitaxy (MBE) chamber. Autocorrelation measurements establish single-photon emission from LDE QDs with a very small correlation function g (2)(0)≃ 0.01 of the exciton emission. Here, we focus on the influence of the initial hole depth on the QD optical properties with the goal to create deep holes suited for filling with more complex nanostructures like quantum dot molecules (QDM). The depth of droplet etched nanoholes is controlled by the droplet material coverage and the process temperature, where a higher coverage or temperature yields deeper holes. The requirements of high quantum dot uniformity and narrow luminescence linewidth, which are often found in applications, set limits to the process temperature. At high temperatures, the hole depths become inhomogeneous and the linewidth rapidly increases beyond 640 °C. With the present process technique, we identify an upper limit of 40-nm hole depth if the linewidth has to remain below 100 μeV. Furthermore, we study the exciton fine-structure splitting which is increased from 4.6 μeV in 15-nm-deep to 7.9 μeV in 35-nm-deep holes. As an example for the functionalization of deep nanoholes, self-aligned vertically stacked GaAs QD pairs are fabricated by filling of holes with 35 nm depth. Exciton peaks from stacked dots show linewidths below 100 μeV which is close to that from single QDs.

Self-assembly of gold nanocrystals into discrete coupled plasmonic structures

Development of methodologies for the controlled chemical assembly of nanoparticles into plasmonic molecules of predictable spatial geometry is vital in order to harness novel properties arising from the combination of the individual components constituting the resulting superstructures. This paper presents a route for fabrication of gold plasmonic structures of controlled stoichiometry obtained by the use of a di-rhenium thio-isocyanide complex as linker molecule for gold nanocrystals. Correlated scanning electron microscopy (SEM)—dark-field spectroscopy was used to characterize obtained discrete monomer, dimer and trimer plasmonic molecules. Polarization-dependent scattering spectra of dimer structures showed highly polarized scattering response, due to their highly asymmetric D∞h geometry. In contrast, some trimer structures displayed symmetric geometry (D3h), which showed small polarization dependent response. Theoretical calculations were used to further understand and attribute the origin of plasmonic bands arising during linker-induced formation of plasmonic molecules. Theoretical data matched well with experimentally calculated data. These results confirm that obtained gold superstructures possess properties which are a combination of the properties arising from single components and can, therefore, be classified as plasmonic molecules

Risk of repeated self-harm and associated factors in children, adolescents and young adults

Background: Repeated self-harm represents the single strongest risk factor for suicide. To date no study with full national coverage has examined the pattern of hospital repeated presentations due to self-harm among young people. Methods: Data on consecutive self-harm presentations were obtained from the National Self-Harm Registry Ireland. Socio-demographic and behavioural characteristics of individuals aged 10–29 years who presented with self-harm to emergency departments in Ireland (2007–2014) were analysed. Risk of long-term repetition was assessed using survival analysis and time differences between the order of presentations using generalised estimating equation analysis. Results: The total sample comprised 28,700 individuals involving 42,642 presentations. Intentional drug overdose was the most prevalent method (57.9%). Repetition of self-harm occurred in 19.2% of individuals during the first year following a first presentation, of whom the majority (62.7%) engaged in one repeated act. Overall, the risk of repeated self-harm was similar between males and females. However, in the 20–24-year-old age group males were at higher risk than females. Those who used self-cutting were at higher risk for repetition than those who used intentional drug overdose, particularly among females. Age was associated with repetition only among females, in particular adolescents (15–19 years old) were at higher risk than young emerging adults (20–24 years old). Repeated self-harm risk increased significantly with the number of previous self-harm episodes. Time differences between first self-harm presentations were detected. Time between second and third presentation increased compared to time between first and second presentation among low frequency repeaters (patients with 3 presentations only within 1 year following a first presentation). The same time period decreased among high frequency repeaters (patients with at least 4 to more than 30 presentations). Conclusion: Young people with the highest risk for repeated self-harm were 15–19-year-old females and 20–24-year-old males. Self-cutting was the method associated with the highest risk of self-harm repetition. Time between first self-harm presentations represents an indicator of subsequent repetition. To prevent risk of repeated self-harm in young people, all individuals presenting at emergency departments due to self-harm should be provided with a risk assessment including psychosocial characteristics, history of self-harm and time between first presentations.