Compilation and analysis of integrated regional input-output tables for NUTS 2 regions in Ireland

In 1966, Roy Geary, Director of the ESRI, noted “the absence of any kind of import and export statistics for regions is a grave lacuna” and further noted that if regional analyses were to be developed then regional Input-Output Tables must be put on the “regular statistical assembly line”. Forty-five years later, the lacuna lamented by Geary still exists and remains the most significant challenge to the construction of regional Input-Output Tables in Ireland. The continued paucity of sufficient regional data to compile effective regional Supply and Use and Input-Output Tables has retarded the capacity to construct sound regional economic models and provide a robust evidence base with which to formulate and assess regional policy. This study makes a first step towards addressing this gap by presenting the first set of fully integrated, symmetric, Supply and Use and domestic Input-Output Tables compiled for the NUTS 2 regions in Ireland: The Border, Midland and Western region and the Southern & Eastern region. These tables are general purpose in nature and are consistent fully with the official national Supply & Use and Input-Output Tables, and the regional accounts. The tables are constructed using a survey-based or bottom-up approach rather than employing modelling techniques, yielding more robust and credible tables. These tables are used to present a descriptive statistical analysis of the two administrative NUTS 2 regions in Ireland, drawing particular attention to the underlying structural differences of regional trade balances and composition of Gross Value Added in those regions. By deriving regional employment multipliers, Domestic Demand Employment matrices are constructed to quantify and illustrate the supply chain impact on employment. In the final part of the study, the predictive capability of the Input-Output framework is tested over two time periods. For both periods, the static Leontief production function assumptions are relaxed to allow for labour productivity. Comparative results from this experiment are presented.

Towards a regional understanding of Irish traditional music

The geography of Irish traditional music is a complex, popular and largely unexplored element of the narrative of the tradition. Geographical concepts such as the region are recurrent in the discourse of Irish traditional music but regions and their processes are, for the most part, blurred or misunderstood. This thesis explores the geographical approach to the study of Irish traditional music focusing on the concept of the region and, in particular, the role of memory in the construction and diffusion of regional identities. This is a tripartite study considering people, place and music. Each of these elements impacts on our experience of the other. All societies have created music. Music is often associated with or derived from places. Some places construct or reinforce their identity through the music and musicians through which they are associated. The thesis challenges conventional discourse on regional styles that construct an imagined pattern of regions based on subtle musical differences that may, though are not always, shared by people in that region and focuses on the social networks through which the music is disseminated. The thesis also challenges the abandonment of regional styles and the concept of regions in understanding the complex geographies of Irish traditional music (Morton, 2001). It seeks to find a middle ground between discourse analysis, musical analysis, the experience of music and place, and the representation of music and place. The dissertation is divided into three parts. Part one considers the development of music geography, noting and critiquing the abandonment of useful paradigms in both geography and ethnomusicology in search of new ways of understanding. Of particular interest is the concept of the region but it also considers the study of landscape and the humanist approach in cultural geography. The second part focuses on the discourse and study of regions in Irish traditional music and the various agents and processes that shape the concept of the region in Irish traditional music. The final part presents a case study of the Sliabh Luachra region combining and applying the various perspectives and paradigms drawn from geographical, ethnomusicological and anthropological sources. It attempts to generate an understanding of Sliabh Luachra as a region in the Irish traditional music narrative that is based on a combination of musical, socio-cultural and locational/environmental factors.

Theme and variations: Christianity and regional landscapes in early medieval Ireland

This thesis explores the impact of Christianity on the landscape in Ireland from the conversion period to the coming of the Anglo-Normans. The premise is that ecclesiastical and secular settlement formed a cohesive whole which characterised the societal organisation of early medieval Ireland. The matter of the thesis is to isolate some of the agents of cohesion to see was this homogenous or did it vary in different areas. One of these agents was the ownership of land and the thesis undertakes to identify ecclesiastical landholding and examine the manner of settlement on it. A corollary is to explore the contribution of the genealogical link between kin-group, founding saint and territory to the construction of local identities. This necessitated a narrow focus; thus small study areas were chosen, which approximated to early medieval kingdoms in North Louth, Rathdown, Co Dublin and Ross, Co Cork. A multidisciplinary approach was taken using both archaeological and documentary evidence. The thesis found ecclesiastical sites were at the same density through the study areas, but there were considerable regional variations in related secular settlement. Ecclesiastical estates were identified in the three study areas and common settlement patterns were found in two of them. Settlement in all areas indicated the foundation of minor churches by local groups. Ecclesiastical sites were found to be integral to kin-group identity and status, but the manner in which each group negotiated this, was very different. Finally the thesis examined material evidence for a change from diffused to concentrated power in the political organisation of Irish society, a process entwined with developments of the Viking Age. This centralisation of power and associated re-formation of identity was still often mediated through the ecclesiastical sphere but the thesis demonstrates diversity in the materialising of the mediation.

Micro and nanostructured impedance sensors for biological and biomedical applications

This thesis work covered the fabrication and characterisation of impedance sensors for biological applications aiming in particular to the cytotoxicity monitoring of cultured cells exposed to different kind of chemical compounds and drugs and to the identification of different types of biological tissue (fat, muscles, nerves) using a sensor fabricated on the tip of a commercially available needle during peripheral nerve block procedures. Gold impedance electrodes have been successfully fabricated for impedance measurement on cells cultured on the electrode surface which was modified with the fabrication of gold nanopillars. These nanostructures have a height of 60nm or 100nm and they have highly ordered layout as they are fabricated through the e-beam technique. The fabrication of the threedimensional structures on the interdigitated electrodes was supposed to improve the sensitivity of the ECIS (electric cell-substrate impedance sensing) measurement while monitoring the cytotoxicity effects of two different drugs (Antrodia Camphorata extract and Nicotine) on three different cell lines (HeLa, A549 and BALBc 3T3) cultured on the impedance devices and change the morphology of the cells growing on the nanostructured electrodes. The fabrication of the nanostructures was achieved combining techniques like UV lithography, metal lift-off, evaporation and e-beam lithography techniques. The electrodes were packaged using a pressure sensitive, medical grade adhesive double-sided tape. The electrodes were then characterised with the aid of AFM and SEM imaging which confirmed the success of the fabrication processes showing the nanopillars fabricated with the right layout and dimensions figures. The introduction of nanopillars on the impedance electrodes, however, did not improve much the sensitivity of the assay with the exception of tests carried out with Nicotine. HeLa and A549 cells appeared to grow in a different way on the two surfaces, while no differences where noticed on the BALBc 3T3 cells. Impedance measurements obtained with the dead cells on the negative control electrodes or the test electrodes with the drugs can be compared to those done on the electrodes containing just media in the tested volume (as no cells are attached and cover the electrode surface). The impedance figures recorded using these electrodes were between 1.5kΩ and 2.5 kΩ, while the figures recorded on confluent cell layers range between 4kΩ and 5.5kΩ with peaks of almost 7 kΩ if there was more than one layer of cells growing on each other. There was then a very clear separation between the values of living cell compared to the dead ones which was almost 2.5 - 3kΩ. In this way it was very easy to determine whether the drugs affected the cells normal life cycle on not. However, little or no differences were noticed in the impedance analysis carried out on the two different kinds of electrodes using cultured cells. An increase of sensitivity was noticed only in a couple of experiments carried out on A549 cells growing on the nanostructured electrodes and exposed to different concentration of a solution containing Nicotine. More experiments to achieve a higher number of statistical evidences will be needed to prove these findings with an absolute confidence. The smart needle project aimed to reduce the limitations of the Electrical Nerve Stimulation (ENS) and the Ultra Sound Guided peripheral nerve block techniques giving the clinicians an additional tool for performing correctly the peripheral nerve block. Bioimpedance, as measured at the needle tip, provides additional information on needle tip location, thereby facilitating detection of intraneural needle placement. Using the needle as a precision instrument and guidance tool may provide additional information as to needle tip location and enhance safety in regional anaesthesia. In the time analysis, with the frequency fixed at 10kHz and the samples kept at 12°C, the approximate range for muscle bioimpedance was 203 – 616 Ω, the approximate bioimpedance range for fat was 5.02 - 17.8 kΩ and the approximate range for connective tissue was 790 Ω – 1.55 kΩ. While when the samples were heated at 37°C and measured again at 10kHz, the approximate bioimpedance range for muscle was 100-175Ω. The approximate bioimpedance range of fat was 627 Ω - 3.2 kΩ and the range for connective tissue was 221-540Ω. In the experiments done on the fresh slaughtered lamb carcass, replicating a scenario close to the real application, the impedance values recorded for fat were around 17 kΩ, for muscle and lean tissue around 1.3 kΩ while the nervous structures had an impedance value of 2.9 kΩ. With the data collected during this research, it was possible to conclude that measurements of bioimpedance at the needle tip location can give valuable information to the clinicians performing a peripheral nerve block procedure as the separation (in terms of impedance figures) was very marked between the different type of tissues. It is then feasible to use an impedance electrode fabricated on the needle tip to differentiate several tissues from the nerve tissue. Currently, several different methods are being studied to fabricate an impedance electrode on the surface of a commercially available needle used for the peripheral nerve block procedure.