Effect of solder volume on joint shape with variable chip-to-board contact pad ratio

The objective of this paper is to investigate the effect of the pad size ratio between the chip and board end of a solder joint on the shape of that solder joint in combination with the solder volume available. The shape of the solder joint is correlated to its reliability and thus of importance. For low density chip bond pad applications Flip Chip (FC) manufacturing costs can be kept down by using larger size board pads suitable for solder application. By using “Surface Evolver” software package the solder joint shapes associated with different size/shape solder preforms and chip/board pad ratios are predicted. In this case a so called Flip-Chip Over Hole (FCOH) assembly format has been used. Assembly trials involved the deposition of lead-free 99.3Sn0.7Cu solder on the board side, followed by reflow, an underfill process and back die encapsulation. During the assembly work pad off-sets occurred that have been taken into account for the Surface Evolver solder joint shape prediction and accurately matched the real assembly. Overall, good correlation was found between the simulated solder joint shape and the actual fabricated solder joint shapes. Solder preforms were found to exhibit better control over the solder volume. Reflow simulation of commercially available solder preform volumes suggests that for a fixed stand-off height and chip-board pad ratio, the solder volume value and the surface tension determines the shape of the joint.

Climate and energy scenarios for Ireland to 2050 using the Irish TIMES energy systems model

Due to growing concerns regarding the anthropogenic interference with the climate system, countries across the world are being challenged to develop effective strategies to mitigate climate change by reducing or preventing greenhouse gas (GHG) emissions. The European Union (EU) is committed to contribute to this challenge by setting a number of climate and energy targets for the years 2020, 2030 and 2050 and then agreeing effort sharing amongst Member States. This thesis focus on one Member State, Ireland, which faces specific challenges and is not on track to meet the targets agreed to date. Before this work commenced, there were no projections of energy demand or supply for Ireland beyond 2020. This thesis uses techno-economic energy modelling instruments to address this knowledge gap. It builds and compares robust, comprehensive policy scenarios, providing a means of assessing the implications of different future energy and emissions pathways for the Irish economy, Ireland’s energy mix and the environment. A central focus of this thesis is to explore the dynamics of the energy system moving towards a low carbon economy. This thesis develops an energy systems model (the Irish TIMES model) to assess the implications of a range of energy and climate policy targets and target years. The thesis also compares the results generated from the least cost scenarios with official projections and target pathways and provides useful metrics and indications to identify key drivers and to support both policy makers and stakeholder in identifying cost optimal strategies. The thesis also extends the functionality of energy system modelling by developing and applying new methodologies to provide additional insights with a focus on particular issues that emerge from the scenario analysis carried out. Firstly, the thesis develops a methodology for soft-linking an energy systems model (Irish TIMES) with a power systems model (PLEXOS) to improve the interpretation of the electricity sector results in the energy system model. The soft-linking enables higher temporal resolution and improved characterisation of power plants and power system operation Secondly, the thesis develops a methodology for the integration of agriculture and energy systems modelling to enable coherent economy wide climate mitigation scenario analysis. This provides a very useful starting point for considering the trade-offs between the energy system and agriculture in the context of a low carbon economy and for enabling analysis of land-use competition. Three specific time scale perspectives are examined in this thesis (2020, 2030, 2050), aligning with key policy target time horizons. The results indicate that Ireland’s short term mandatory emissions reduction target will not be achieved without a significant reassessment of renewable energy policy and that the current dominant policy focus on wind-generated electricity is misplaced. In the medium to long term, the results suggest that energy efficiency is the first cost effective measure to deliver emissions reduction; biomass and biofuels are likely to be the most significant fuel source for Ireland in the context of a low carbon future prompting the need for a detailed assessment of possible implications for sustainability and competition with the agri-food sectors; significant changes are required in infrastructure to deliver deep emissions reductions (to enable the electrification of heat and transport, to accommodate carbon capture and storage facilities (CCS) and for biofuels); competition between energy and agriculture for land-use will become a key issue. The purpose of this thesis is to increase the evidence-based underpinning energy and climate policy decisions in Ireland. The methodology is replicable in other Member States.

Ironworking in late medieval Ireland, c. AD. 1200 to 1600

The landscape of late medieval Ireland, like most places in Europe, was characterized by intensified agricultural exploitation, the growth and founding of towns and cities and the construction of large stone edifices, such as castles and monasteries. None of these could have taken place without iron. Axes were needed for clearing woodland, ploughs for turning the soil, saws for wooden buildings and hammers and chisels for the stone ones, all of which could not realistically have been made from any other material. The many battles, waged with ever increasingly sophisticated weaponry, needed a steady supply of iron and steel. During the same period, the European iron industry itself underwent its most fundamental transformation since its inception; at the beginning of the period it was almost exclusively based on small furnaces producing solid blooms and by the turn of the seventeenth century it was largely based on liquid-iron production in blast-furnaces the size of a house. One of the great advantages of studying the archaeology of ironworking is that its main residue, slag, is often produced in copious amounts both during smelting and smithing, is virtually indestructible and has very little secondary use. This means that most sites where ironworking was carried out are readily recognizable as such by the occurrence of this slag. Moreover, visual examination can distinguish between various types of slag, which are often characteristic for the activity from which they derive. The ubiquity of ironworking in the period under study further means that we have large amounts of residues available for study, allowing us to distinguish patterns both inside assemblages and between sites. Disadvantages of the nature of the remains related to ironworking include the poor preservation of the installations used, especially the furnaces, which were often built out of clay and located above ground. Added to this are the many parameters contributing to the formation of the above-mentioned slag, making its composition difficult to connect to a certain technology or activity. Ironworking technology in late medieval Ireland has thus far not been studied in detail. Much of the archaeological literature on the subject is still tainted by the erroneous attribution of the main type of slag, bun-shaped cakes, to smelting activities. The large-scale infrastructure works of the first decade of the twenty-first century have led to an exponential increase in the amount of sites available for study. At the same time, much of the material related to metalworking recovered during these boom-years was subjected to specialist analysis. This has led to a near-complete overhaul of our knowledge of early ironworking in Ireland. Although many of these new insights are quickly seeping into the general literature, no concise overviews on the current understanding of the early Irish ironworking technology have been published to date. The above then presented a unique opportunity to apply these new insights to the extensive body of archaeological data we now possess. The resulting archaeological information was supplemented with, and compared to, that contained in the historical sources relating to Ireland for the same period. This added insights into aspects of the industry often difficult to grasp solely through the archaeological sources, such as the people involved and the trade in iron. Additionally, overviews on several other topics, such as a new distribution map of Irish iron ores and a first analysis of the information on iron smelting and smithing in late medieval western Europe, were compiled to allow this new knowledge on late medieval Irish ironworking to be put into a wider context. Contrary to current views, it appears that it is not smelting technology which differentiates Irish ironworking from the rest of Europe in the late medieval period, but its smithing technology and organisation. The Irish iron-smelting furnaces are generally of the slag-tapping variety, like their other European counterparts. Smithing, on the other hand, is carried out at ground-level until at least the sixteenth century in Ireland, whereas waist-level hearths become the norm further afield from the fourteenth century onwards. Ceramic tuyeres continue to be used as bellows protectors, whereas these are unknown elsewhere on the continent. Moreover, the lack of market centres at different times in late medieval Ireland, led to the appearance of isolated rural forges, a type of site unencountered in other European countries during that period. When these market centres are present, they appear to be the settings where bloom smithing is carried out. In summary, the research below not only offered us the opportunity to give late medieval ironworking the place it deserves in the broader knowledge of Ireland's past, but it also provided both a base for future research within the discipline, as well as a research model applicable to different time periods, geographical areas and, perhaps, different industries..

The effects of copayment policies on adherence to prescription medicines in publicly insured populations

Introduction: Copayments for prescriptions are associated with decreased adherence to medicines resulting in increased health service utilisation, morbidity and mortality. In October 2010 a 50c copayment per prescription item was introduced on the General Medical Services (GMS) scheme in Ireland, the national public health insurance programme for low-income and older people. The copayment was increased to €1.50 per prescription item in January 2013. To date, the impact of these copayments on adherence to prescription medicines on the GMS scheme has not been assessed. Given that the GMS population comprises more than 40% of the Irish population, this presents an important public health problem. The aim of this thesis was to assess the impact of two prescription copayments, 50c and €1.50, on adherence to medicines.Methods: In Chapter 2 the published literature was systematically reviewed with meta-analysis to a) develop evidence on cost-sharing for prescriptions and adherence to medicines and b) develop evidence for an alternative policy option; removal of copayments. The core research question of this thesis was addressed by a large before and after longitudinal study, with comparator group, using the national pharmacy claims database. New users of essential and less-essential medicines were included in the study with sample sizes ranging from 7,007 to 136,111 individuals in different medication groups. Segmented regression was used with generalised estimating equations to allow for correlations between repeated monthly measurements of adherence. A qualitative study involving 24 individuals was conducted to assess patient attitudes towards the 50c copayment policy. The qualitative and quantitative findings were integrated in the discussion chapter of the thesis. The vast majority of the literature on this topic area is generated in North America, therefore a test of generalisability was carried out in Chapter 5 by comparing the impact of two similar copayment interventions on adherence, one in the U.S. and one in Ireland. The method used to measure adherence in Chapters 3 and 5 was validated in Chapter 6. Results: The systematic review with meta-analysis demonstrated an 11% (95% CI 1.09 to 1.14) increased odds of non-adherence when publicly insured populations were exposed to copayments. The second systematic review found moderate but variable improvements in adherence after removal/reduction of copayments in a general population. The core paper of this thesis found that both the 50c and €1.50 copayments on the GMS scheme were associated with larger reductions in adherence to less-essential medicines than essential medicines directly after the implementation of policies. An important exception to this pattern was observed; adherence to anti-depressant medications declined by a larger extent than adherence to other essential medicines after both copayments. The cross country comparison indicated that North American evidence on cost-sharing for prescriptions is not automatically generalisable to the Irish setting. Irish patients had greater immediate decreases of -5.3% (95% CI -6.9 to -3.7) and -2.8% (95% CI -4.9 to -0.7) in adherence to anti-hypertensives and anti-hyperlipidaemic medicines, respectively, directly after the policy changes, relative to their U.S. counterparts. In the long term, however, the U.S. and Irish populations had similar behaviours. The concordance study highlighted the possibility of a measurement bias occurring for the measurement of adherence to non-steroidal anti-inflammatory drugs in Chapter 3. Conclusions: This thesis has presented two reviews of international cost-sharing policies, an assessment of the generalisability of international evidence and both qualitative and quantitative examinations of cost-sharing policies for prescription medicines on the GMS scheme in Ireland. It was found that the introduction of a 50c copayment and its subsequent increase to €1.50 on the GMS scheme had a larger impact on adherence to less-essential medicines relative to essential medicines, with the exception of anti-depressant medications. This is in line with policy objectives to reduce moral hazard and is therefore demonstrative of the value of such policies. There are however some caveats. The copayment now stands at €2.50 per prescription item. The impact of this increase in copayment has yet to be assessed which is an obvious point for future research. Careful monitoring for adverse effects in socio-economically disadvantaged groups within the GMS population is also warranted. International evidence can be applied to the Irish setting to aid in future decision making in this area, but not without placing it in the local context first. Patients accepted the introduction of the 50c charge, however did voice concerns over a rising price. The challenge for policymakers is to find the ‘optimal copayment’ – whereby moral hazard is decreased, but access to essential chronic disease medicines that provide advantages at the population level is not deterred. This evidence presented in this thesis will be utilisable for future policy-making in Ireland.

Impurity profiling and synthesis of precursors to the hallucinogenic amphetamine DOB

DOB (4‐bromo‐2,5‐dimethoxyamphetamine) is a newly emerging hallucinogenic amphetamine that sparked serious health warnings in Ireland, following its first seizure back in 2003. Known more commonly as “snowball”, this drug is highly potent and may be used as a substitute to ecstasy (MDMA) and lysergic acid diethylamide (LSD). To date, the work carried out on the impurity profiling of DOB is limited in comparison to amphetamine, methamphetamine and MDMA. In this work, the impurity profile of 4‐bromo‐2,5‐dimethoxyphenyl‐2‐propanone (4‐Br‐2,5‐P2P) is explored. This ketone is a direct precursor to DOB. Its more versatile non‐bromo analogue, 2,5‐ dimethoxyphenyl‐2‐propanone (2,5‐P2P) is also examined, as in addition to DOB, it may be used in the synthesis of a range of several other hallucinogenic amphetamines. A number of different routes to both 2,5‐P2P and 4‐Br‐2,5‐P2P were investigated. For each of these routes, the impurities produced were carefully isolated. Following isolation, the impurities were fully characterised (by 1H‐NMR/13C‐NMR spectroscopy, IR, MS), in order to aid structure elucidation. Compounds not easily resolved by flash column chromatography were analysed by LC‐MS and/or independently synthesised for the purpose of attaining reference standards. Adaptation of the well‐known ‘phenylacetic acid route’ to synthesis of both 2,5‐P2P and 4‐Br‐2,5‐P2P, was found to provide low yields of the expected ketone products. Four impurities were isolated during the preparation of both ketones. The yield of one of these impurities (possessing a dibenzylketone core), was greatly influenced by the amount of acetic anhydride reagent used during the reaction. Having carried out the reaction with several different equivalents of acetic anhydride, it was found that formation of the ‘dibenzylketone’ could not be eliminated. This may increase its likelihood of being detected in the final drug product. The ‘Darzens route’, having very recently emerged as a synthetic route to amphetamine and MDMA precursors, was discovered to be a viable route for manufacture of 2,5‐P2P and 4‐Br‐2,5‐P2P. Despite execution of the reaction being more tedious, the route provides superior yields (≈50–60%) to those achieved using the ‘phenylacetic acid route’ (≈35–38%). Incorporation of a bromine atom (at the aromatic 4‐position) is required at some stage during synthesis of DOB. The bromination of many intermediates/starting materials was therefore also examined in detail. Bromination of the acid starting material 2,5‐dimethoxyphenylacetic acid (2,5‐PAA) was found to be clean and high yielding. This was in stark contrast to the bromination of the benzaldehyde starting material, the ketone precursor 2,5‐P2P and the dibenzylketone‐based impurity. Numerous brominated products were isolated from each of these reactions, many of which were novel compounds, and previously unreported as impurities in the literature. The unpredictable/nondescript nature of these brominations is likely to have a significant impact on the impurity profile of illicitly produced DOB.

Reframing Chinese animation: from classicism to postmodernism in post-1949 non-commercial Chinese animated films

This thesis focuses on Chinese non-commercial animated films produced from 1949 to date, with the aim of remapping and reframing Chinese animation in the light of existing theories, critiques, and frameworks drawn from studies in animation, film, and screen media. I suggest that Chinese animation has experienced three aesthetic transformations since 1949, primarily influenced by traditional Chinese culture, by Western modernist art and literature and, most recently, by postmodernism, respectively. Thus, the research traces and thoroughly investigates these three distinctive phases of Chinese animation in chronological order, from the classical period (1950s– 1980s) to modernism (1980s–2000s) and postmodernism (after 2000s). More in detail, I first rethink and re-evaluate the success of classical Chinese animation and the Chinese school of animation and, at the same time, I explore the influence of the political situation of the time on Chinese animation. Through careful analysis of A Da (1934–87) and other Chinese animators’ practices and theory, then, I argue that a remarkable modernist transformation took place in Chinese animation between the 1980s and 2000s, mainly driven by Western modernism and the Chinese “cultural fever” movement. Finally, through a discussion of the latest non-commercial animations produced after 2005, and especially those of Bu Hua (1973– ), for the first time I classify and theorize contemporary Chinese animations within a postmodern framework. By reframing existing views and broadening the scope of the analysis to encompass new areas and frameworks, this thesis aims to provide the reader with a comprehensive and systematic understanding of post-1949 Chinese animation and to offer an original contribute to scholarship, also working as a starting point for further research in this area.