Phase estimation receiver for full-field detection: a novel receiver structure for electronic dispersion compensation of metropolitan area networks

The development of ultra high speed (~20 Gsamples/s) analogue to digital converters (ADCs), and the delayed deployment of 40 Gbit/s transmission due to the economic downturn, has stimulated the investigation of digital signal processing (DSP) techniques for compensation of optical transmission impairments. In the future, DSP will offer an entire suite of tools to compensate for optical impairments and facilitate the use of advanced modulation formats. Chromatic dispersion is a very significant impairment for high speed optical transmission. This thesis investigates a novel electronic method of dispersion compensation which allows for cost-effective accurate detection of the amplitude and phase of the optical field into the radio frequency domain. The first electronic dispersion compensation (EDC) schemes accessed only the amplitude information using square law detection and achieved an increase in transmission distances. This thesis presents a method by using a frequency sensitive filter to estimate the phase of the received optical field and, in conjunction with the amplitude information, the entire field can be digitised using ADCs. This allows DSP technologies to take the next step in optical communications without requiring complex coherent detection. This is of particular of interest in metropolitan area networks. The full-field receiver investigated requires only an additional asymmetrical Mach-Zehnder interferometer and balanced photodiode to achieve a 50% increase in EDC reach compared to amplitude only detection.

Antenna development for wearable wireless sensing systems

Embedded wireless sensor network (WSN) systems have been developed and used in a wide variety of applications such as local automatic environmental monitoring; medical applications analysing aspects of fitness and health energy metering and management in the built environment as well as traffic pattern analysis and control applications. While the purpose and functions of embedded wireless sensor networks have a myriad of applications and possibilities in the future, a particular implementation of these ambient sensors is in the area of wearable electronics incorporated into body area networks and everyday garments. Some of these systems will incorporate inertial sensing devices and other physical and physiological sensors with a particular focus on the application areas of athlete performance monitoring and e-health. Some of the important physical requirements for wearable antennas are that they are light-weight, small and robust and should also use materials that are compatible with a standard manufacturing process such as flexible polyimide or fr4 material where low cost consumer market oriented products are being produced. The substrate material is required to be low loss and flexible and often necessitates the use of thin dielectric and metallization layers. This paper describes the development of such a wearable, flexible antenna system for ISM band wearable wireless sensor networks. The material selected for the development of the wearable system in question is DE104i characterized by a dielectric constant of 3.8 and a loss tangent of 0.02. The antenna feed line is a 50 Ohm microstrip topology suitable for use with standard, high-performance and low-cost SMA-type RF connector technologies, widely used for these types of applications. The desired centre frequency is aimed at the 2.4GHz ISM band to be compatible with IEEE 802.15.4 Zigbee communication protocols and the Bluetooth standard which operate in this band.

An energy efficient power controller switching methodology for an ambient healthcare network

A methodology for improved power controller switching in mobile Body Area Networks operating within the ambient healthcare environment is proposed. The work extends Anti-windup and Bumpless transfer results to provide a solution to the ambulatory networking problem that ensures sufficient biometric data can always be regenerated at the base station. The solution thereby guarantees satisfactory quality of service for healthcare providers. Compensation is provided for the nonlinear hardware constraints that are a typical feature of the type of network under consideration and graceful performance degradation in the face of hardware output power saturation is demonstrated, thus conserving network energy in an optimal fashion.

A demonstration of wireless sensing for long-term monitoring of water quality

At a time when technological advances are providing new sensor capabilities, novel network capabilities, long-range communications technologies and data interpreting and delivery formats via the World Wide Web, we never before had such opportunities to sense and analyse the environment around us. However, the challenges exist. While measurement and detection of environmental pollutants can be successful under laboratory-controlled conditions, continuous in-situ monitoring remains one of the most challenging aspects of environmental sensing. This paper describes the development and test of a multi-sensor heterogeneous real-time water monitoring system. A multi-sensor system was deployed in the River Lee, County Cork, Ireland to monitor water quality parameters such as pH, temperature, conductivity, turbidity and dissolved oxygen. The R. Lee comprises of a tidal water system that provides an interesting test site to monitor. The multi-sensor system set-up is described and results of the sensor deployment and the various challenges are discussed.

An exploratory study on the impact of an early years' preschool intervention programme in the Republic of Ireland

Early years’ education has increasingly been identified as a mechanism to alleviate educational disadvantage in areas of social exclusion. Early years’ intervention programmes are now a common government social policy for addressing social problems (Reynolds, Mann, Miedel, and Smokowski, 1997). In particular, state provided early years’ programmes such as Head Start in the United States and Early Start in Ireland have been established to combat educational disadvantage for children experiencing poverty and socio-economic inequality. The focus of this research is on the long-term outcomes of an early years’ intervention programme in Ireland. It aims to assess whether participation in the programme enhances the life course of children at-risk of educational disadvantage. It involves an in-depth analysis of one Early Start project which was included in the original eight projects established by the Department of Education and Science in 1994. The study utilises a multi-group design to provide a detailed analysis of both the academic and social progress of programme participants. It examines programme outcomes from a number of perspectives by collecting the views of the three main stakeholders involved in the education process; students who participated in Early Start in 1994/5, their parents and their teachers. To contribute to understanding the impact of the programme from a community perspective interviews were also conducted with local community educators and other local early years’ services. In general, Early Start was perceived by all participants in this study as making a positive contribution to parent involvement in education and to strengthening educational capital in the local area. The study found that parents and primary school teachers identified aspects of school readiness as the main benefit of participation in Early Start and parents and teachers were very positive about the role of Early Start in preparing children for the transition to formal school. In addition to this, participation in Early Start appears to have made a positive contribution to academic attainment in Maths and Science at Junior Certificate level. Students who had participated in Early Start were also rated more highly by their second level teachers in terms of goal-setting and future orientation which are important factors in educational attainment. Early Start then can be viewed as providing a positive contribution to the long-term social and academic outcomes for its participants.

Childhood obesity in Ireland: recent trends and modifiable determinants

Background: Childhood obesity is a global epidemic posing a significant threat to the health and wellbeing of children. To reverse this epidemic, it is essential that we gain a deeper understanding of the complex array of driving factors at an individual, family and wider ecological level. Using a social-ecological framework, this thesis investigates the direction, magnitude and contribution of risk factors for childhood overweight and obesity at multiple levels of influence, with a particular focus on diet and physical activity. Methods: A systematic review was conducted to describe recent trends (from 2002-2012) in childhood overweight and obesity prevalence in Irish school children from the Republic of Ireland. Two datasets (Cork Children’s Lifestyle [CCLaS] Study and the Growing Up in Ireland [GUI] Study) were used to explore determinants of childhood overweight and obesity. Individual lifestyle factors examined were diet, physical activity and sedentary behaviour. The determinants of physical activity were also explored. Family factors examined were parental weight status and household socio-economic status. The impact of food access in the local area on diet quality and body mass index (BMI) was investigated as an environmental level risk factor. Results: Between 2002 and 2012, the prevalence of childhood overweight and obesity in Ireland remained stable. There was some evidence to suggest that childhood obesity rates may have decreased slightly though one in four Irish children remained either overweight or obese. In the CCLaS study, overweight and obese children consumed more unhealthy foods than normal weight children. A diet quality score was constructed based on a previously validated adult diet score. Each one unit increase in diet quality was significantly associated with a decreased risk of childhood overweight and obesity. Individual level factors (including gender, being a member of a sports team, weight status) were more strongly associated with physical activity levels than family or environmental factors. Overweight and obese children were more sedentary and less active than normal weight children. There was a dose response relationship between time spent at moderate to vigorous physical activity (MVPA) and the risk of childhood obesity independent of sedentary time. In contrast, total sedentary time was not associated with the risk of childhood obesity independent of MVPA though screen time was associated with childhood overweight and obesity. In the GUI Study, only one in five children had 2 normal weight parents (or one normal weight parent in the case of single parent families). Having overweight and obese parents was a significant risk factor for overweight and obesity regardless of socio-economic characteristics of the household. Family income was not associated with the odds of childhood obesity but social class and parental education were important risk factors for childhood obesity. Access to food stores in the local environment did not impact dietary quality or the BMI of Irish children. However, there was some evidence to suggest that the economic resources of the family influenced diet and BMI. Discussion: Though childhood overweight and obesity rates appear to have stabilised over the previous decade, prevalence rates are unacceptably high. As expected, overweight and obesity were associated with a high energy intake and poor dietary quality. The findings also highlight strong associations between physical inactivity and the risk of overweight and obesity, with effect sizes greater than what have been typically found in adults. Important family level determinants of childhood overweight and obesity were also identified. The findings highlight the need for a multifaceted approach, targeting a range of modifiable determinants to tackle the problem. In particular, policies and interventions at the shared family environment or community level may be an effective mean of tackling this current epidemic.

Addressing non-linear hardware limitations and extending network coverage area for power aware wireless sensor networks

Science Foundation Ireland (07/CE/11147); Irish Research Council for Science Engineering and Technology (Embark Initiative)

Towards persistent structural health monitoring through sustainable wireless sensor networks

This paper documents the design, implementation and characterisation of a wireless sensor node (GENESI Node v1.0), applicable to long-term structural health monitoring. Presented is a three layer abstraction of the hardware platform; consisting of a Sensor Layer, a Main Layer and a Power Layer. Extended operational lifetime is one of the primary design goals, necessitating the inclusion of supplemental energy sources, energy awareness, and the implementation of optimal components (microcontroller(s), RF transceiver, etc.) to achieve lowest-possible power consumption, whilst ensuring that the functional requirements of the intended application area are satisfied. A novel Smart Power Unit has been developed; including intelligence, ambient available energy harvesting (EH), storage, electrochemical fuel cell integration, and recharging capability, which acts as the Power Layer for the node. The functional node has been prototyped, demonstrated and characterised in a variety of operational modes. It is demonstrable via simulation that, under normal operating conditions within a structural health monitoring application, the node may operate perpetually.

Planning the deployment of fault-tolerant wireless sensor networks

Since Wireless Sensor Networks (WSNs) are subject to failures, fault-tolerance becomes an important requirement for many WSN applications. Fault-tolerance can be enabled in different areas of WSN design and operation, including the Medium Access Control (MAC) layer and the initial topology design. To be robust to failures, a MAC protocol must be able to adapt to traffic fluctuations and topology dynamics. We design ER-MAC that can switch from energy-efficient operation in normal monitoring to reliable and fast delivery for emergency monitoring, and vice versa. It also can prioritise high priority packets and guarantee fair packet deliveries from all sensor nodes. Topology design supports fault-tolerance by ensuring that there are alternative acceptable routes to data sinks when failures occur. We provide solutions for four topology planning problems: Additional Relay Placement (ARP), Additional Backup Placement (ABP), Multiple Sink Placement (MSP), and Multiple Sink and Relay Placement (MSRP). Our solutions use a local search technique based on Greedy Randomized Adaptive Search Procedures (GRASP). GRASP-ARP deploys relays for (k,l)-sink-connectivity, where each sensor node must have k vertex-disjoint paths of length ≤ l. To count how many disjoint paths a node has, we propose Counting-Paths. GRASP-ABP deploys fewer relays than GRASP-ARP by focusing only on the most important nodes – those whose failure has the worst effect. To identify such nodes, we define Length-constrained Connectivity and Rerouting Centrality (l-CRC). Greedy-MSP and GRASP-MSP place minimal cost sinks to ensure that each sensor node in the network is double-covered, i.e. has two length-bounded paths to two sinks. Greedy-MSRP and GRASP-MSRP deploy sinks and relays with minimal cost to make the network double-covered and non-critical, i.e. all sensor nodes must have length-bounded alternative paths to sinks when an arbitrary sensor node fails. We then evaluate the fault-tolerance of each topology in data gathering simulations using ER-MAC.

Coherent wavelength division multiplexing: a novel transmission format for high spectral density optical communication networks

In this thesis a novel transmission format, named Coherent Wavelength Division Multiplexing (CoWDM) for use in high information spectral density optical communication networks is proposed and studied. In chapter I a historical view of fibre optic communication systems as well as an overview of state of the art technology is presented to provide an introduction to the subject area. We see that, in general the aim of modern optical communication system designers is to provide high bandwidth services while reducing the overall cost per transmitted bit of information. In the remainder of the thesis a range of investigations, both of a theoretical and experimental nature are carried out using the CoWDM transmission format. These investigations are designed to consider features of CoWDM such as its dispersion tolerance, compatibility with forward error correction and suitability for use in currently installed long haul networks amongst others. A high bit rate optical test bed constructed at the Tyndall National Institute facilitated most of the experimental work outlined in this thesis and a collaboration with France Telecom enabled long haul transmission experiments using the CoWDM format to be carried out. An amount of research was also carried out on ancillary topics such as optical comb generation, forward error correction and phase stabilisation techniques. The aim of these investigations is to verify the suitability of CoWDM as a cost effective solution for use in both current and future high bit rate optical communication networks

Farmers, agriculture and politics in the Irish Free State area, 1919-1936

Given the economic and social importance of agriculture in the early years of the Irish Free State, it is surprising that the development of organisations representing farmers has not received the attention it deserves from historians. While the issues of government agricultural policy and the land question have been extensively studied in the historiography, the autonomous response by farmers to agricultural policies and the detailed study of the farmers’ organisations has simply been ignored in spite of the existence of a range of relevant primary sources. Farmers’ organisations have only received cursory treatment in these studies; they have been presented as passive spectators, responding in a Pavlovian manner to outside events. The existing historiography has only studied farmers’ organisations during periods when they impinged on national politics, epecially during the War of Independence and the Economic War. Therefore chronological gaps exist which has led to much misinterpretation of farmers’ activities. This thesis will redress this imbalance by studying the formation and continuous development of farmers’ organisations within the twenty-six county area and the reaction of farmers to changing government agricultural policies, over the period 1919 to 1936. The period under review entailed many attempts by farmers to form representative organisations and encompassed differing policy regimes. The thesis will open in 1919, when the first national organisation representing farmers, the Irish Farmers’ Union, was formed. In 1922, the union established the Farmers’ Party. By the mid- 1920’s, a number of protectionist agricultural associations had been formed. While the Farmers’ Party was eventually absorbed by Cumann na nGaedheal, local associations of independent farmers occupied the resultant vacuum and contested the 1932 election. These organisations formed the nucleus of a new national organisation; the National Farmers’ and Ratepayers’ League. The agricultural crisis caused by both the Great Depression and the Economic War facilitated the expansion of the league. The league formed a political party, the Centre Party, to contest the 1933 election. While the Centre Party was absorbed by the newly-formed Fine Gael, activists from the former farmer organisations led the campaign against the payment of annuities and rates. Many of them continued this campaign after 1934, when the Fine Gael leadership opposed the violent resistance to the collection of annuities. New farmer organisations were formed to co-ordinate this campaign which continued until 1936, the closing point of the thesis.

States of play: Irish childhoods, race and belonging

This thesis explores the meaning-making practices of migrant and non-migrant children in relation to identities, race, belonging and childhood itself in their everyday lives and in the context of ‘normalizing’ discourses and spaces in Ireland. The relational, spatial and institutional contexts of children’s worlds are examined in the arenas of school, home, family, peer groups and consumer culture. The research develops a situated account of children’s complex subject positions, belongings and exclusions, as negotiated within discursive constructs, emerging in the ‘in-between’ spaces explored with other children and with adults. As a peripheral EU area both geographically and economically, Ireland has traditionally been a country of net emigration. This situation changed briefly in the late 1990s to early 2000s, sparking broad debate on Ireland’s perceived ‘new’ ethnic, cultural and linguistic diversity arising from the arrival of migrant people both from within and beyond the EU as workers and as asylum seekers, and drawing attention to issues of race, identity, equality and integration in Irish society. Based in a West of Ireland town where migrant children and children of migrants comprise very small minorities in classroom settings, this research engages with a particular demographic of children who have started primary school since these changes have occurred. It seeks to represent the complexities of the processes which constitute children’s subjectivities, and which also produce and reproduce race and childhood itself in this context. The role of local, national and global spaces, relational networks and discursive currents as they are experienced and negotiated by children are explored, and the significance of embodied, sensory and affective processes are integrated into the analysis. Notions of the functions and rhetorics of play and playfulness (Sutton-Smith 1997) form a central thread that runs throughout the thesis, where play is both a feature of children’s cultural worlds and a site of resistance or ‘thinking otherwise’. The study seeks to examine how children actively participate in (re)producing definitions of both childhood and race arising in local, national and global spaces, demonstrating that while contestations of the boundaries of childhood discourses are contingently successful, race tends to be strongly reiterated, clinging to bodies and places and compromising belonging. In addition, it explores how children access belongings through agentic and imaginative practices with regard to peer and family relationships, particularly highlighting constructions of home, while also illustrating practices of excluding children positioned as unintelligible, including the role of silences in such situations. Finally, drawing on teachers’ understandings and on children’s playful micro-level negotiations of race, the study argues that assumptions of childhood innocence contribute to justifying depoliticised discourses of race in the early primary school years, and also tend to silence children’s own dialogues with this issue. Central throughout the thesis is an emphasis on the productive potentials of children’s marginal positioning in processes of transgressing definitional boundaries, including the generation of post-race conceptualisations that revealed the borders of race as performative and fluid. It suggests that interrupting exclusionary raced identities in Irish primary schools requires engagement with children’s world-making practices and the multiple resources that inform their lives.