Burst-mode electronic dispersion compensation in long reach PONs

Long reach passive optical networks (LR-PONs), which integrate fibre-to-the-home with metro networks, have been the subject of intensive research in recent years and are considered one of the most promising candidates for the next generation of optical access networks. Such systems ideally have reaches greater than 100km and bit rates of at least 10Gb/s per wavelength in the downstream and upstream directions. Due to the limited equipment sharing that is possible in access networks, the laser transmitters in the terminal units, which are usually the most expensive components, must be as cheap as possible. However, the requirement for low cost is generally incompatible with the need for a transmitter chirp characteristic that is optimised for such long reaches at 10Gb/s, and hence dispersion compensation is required. In this thesis electronic dispersion compensation (EDC) techniques are employed to increase the chromatic dispersion tolerance and to enhance the system performance at the expense of moderate additional implementation complexity. In order to use such EDC in LR-PON architectures, a number of challenges associated with the burst-mode nature of the upstream link need to be overcome. In particular, the EDC must be made adaptive from one burst to the next (burst-mode EDC, or BM-EDC) in time scales on the order of tens to hundreds of nanoseconds. Burst-mode operation of EDC has received little attention to date. The main objective of this thesis is to demonstrate the feasibility of such a concept and to identify the key BM-EDC design parameters required for applications in a 10Gb/s burst-mode link. This is achieved through a combination of simulations and transmission experiments utilising off-line data processing. The research shows that burst-to-burst adaptation can in principle be implemented efficiently, opening the possibility of low overhead, adaptive EDC-enabled burst-mode systems.

Antimicrobial stewardship in Ireland, with a focus on long term care facilities

Background: Antimicrobial resistance is a major public health concern, and its increasing incidence in the Long Term Care Facility (LTCF) setting warrants attention (1). The prescribing of antimicrobials in this setting is often inappropriate and higher in Ireland than the European average (2). The aim of the study was to generate an evidence base for the factors influencing antimicrobial prescribing in LTCFs and to investigate Antimicrobial Stewardship (AMS) strategies for LTCFs. Methods: An initial qualitative study was conducted to determine the factors influencing antimicrobial prescribing in Irish LTCFs. This allowed for the informed implementation of an AMS feasibility study in LTCFs in the greater Cork region. Hospital AMS was also investigated by means of a national survey. A study of LTCF urine sample antimicrobial resistance rates was conducted in order to collate information for incorporation into future LTCF AMS initiatives. Results: The qualitative interviews determined that there are a multitude of factors, unique to the LTCF setting, which influence antimicrobial prescribing. There was a positive response from the doctors and nurses involved in the feasibility study as they welcomed the opportunity to engage with AMS and audit and feedback activities. While the results did not indicate a significant change in antimicrobial prescribing over the study period, important trends and patterns of use were detected. The antimicrobial susceptibility of LTCF urine samples compared to GPs samples found that there was a higher level of antimicrobial resistance in LTCFs. Conclusion: This study has made an important contribution to the development of AMS in LTCFs. The complexity of care and healthcare organisation, and the factors unique to LTCFs must be borne in mind when developing quality improvement strategies.