The human impacts of flower farm development in the Ethiopian Rift Valley region

The flower industry has a reputation for heavy usage of toxic chemicals and polluting the environment, enormous consumption of water, and poor working condition and low wage level in various parts of the world. It is unfortunate that this industry is adamant to change and repeating the same mistakes in Ethiopia. Because of this, - there is a growing concern among the general public and the international community about sustainability of the Ethiopian flower industry. Consequently, working conditions in the flower industry, impacts of wage income on the livelihoods of employees, coping strategies of low wage flower farm workers, impacts of flower farms on the livelihoods of local people and environmental pollution and conflict, were analysed. Both qualitative and quantitative research methods were employed. Four quantitative data sets: labour practice, employees’ income and expenditure, displaced household, and flower grower views survey were collected between 2010 and 2012. Robust regression to identify the determinants of wage levels, and Multinomial logit to identify the determinants of coping strategies of flower farm workers and displaced households were employed. The findings show the working conditions in flower farms are characterized by low wages, job insecurity and frequent violation of employees’ rights, and poor safety measures. To ensure survival of their family, land dispossessed households adopt a wide range of strategies including reduction in food consumption, sharing oxen, renting land, share cropping, and shifting staple food crops. Most experienced scarcity of water resources, lack of grazing areas, death of herds and reduced numbers of livestock due to water source pollution. Despite the Ethiopian government investment in attracting and creating conducive environment for investors, not much was accomplished when it comes to enforcing labour laws and environmental policies. Flower farm expansion in Ethiopia, as it is now, can be viewed as part of the global land and water grab and is not all inclusive and sustainable. Several recommendations are made to improve working conditions, maximize the benefits of flower industry to the society, and to the country at large.

The use of different blood sample preparations in the development of biomarkers for the environmental monitoring of domestic farm animals

The application of biological effect monitoring for the detection of environmental chemical exposure in domestic animals is still in its infancy. This study investigated blood sample preparations in vitro for their use in biological effect monitoring. When peripheral blood mononuclear cells (PBMCs), isolated following the collection of multiple blood samples from sheep in the field, were cryopreserved and subsequently cultured for 24 hours a reduction in cell viability (<80%) was attributed to delays in the processing following collection. Alternative blood sample preparations using rat and sheep blood demonstrated that 3 to 5 hour incubations can be undertaken without significant alterations in the viability of the lymphocytes; however, a substantial reduction in viability was observed after 24 hours in frozen blood. Detectable levels of early and late apoptosis as well as increased levels of ROS were detectable in frozen sheep blood samples. The addition of ascorbic acid partly reversed this effect and reduced the loss in cell viability. The response of the rat and sheep blood sample preparations to genotoxic compounds ex vivo showed that EMS caused comparable dose-dependent genotoxic effects in all sample preparations (fresh and frozen) as detected by the Comet assay. In contrast, the effects of CdCl2 were dependent on the duration of exposure as well as the sample preparation. The analysis of leukocyte subsets in frozen sheep blood showed no alterations in the percentages of T and B lymphocytes but led to a major decrease in the percentage of granulocytes compared to those in the fresh samples. The percentages of IFN-γ and IL-4 but not IL-6 positive cells were comparable between fresh and frozen sheep blood after 4 hour stimulation with phorbol 12-myrisate 13-acetate and ionomycin (PMA+I). These results show that frozen blood gives comparable responses to fresh blood samples in the toxicological and immune assays used.

Development of miniaturized wireless sensor nodes suitable for building energy management and modelling

Buildings consume 40% of Ireland's total annual energy translating to 3.5 billion (2004). The EPBD directive (effective January 2003) places an onus on all member states to rate the energy performance of all buildings in excess of 50m2. Energy and environmental performance management systems for residential buildings do not exist and consist of an ad-hoc integration of wired building management systems and Monitoring & Targeting systems for non-residential buildings. These systems are unsophisticated and do not easily lend themselves to cost effective retrofit or integration with other enterprise management systems. It is commonly agreed that a 15-40% reduction of building energy consumption is achievable by efficiently operating buildings when compared with typical practice. Existing research has identified that the level of information available to Building Managers with existing Building Management Systems and Environmental Monitoring Systems (BMS/EMS) is insufficient to perform the required performance based building assessment. The cost of installing additional sensors and meters is extremely high, primarily due to the estimated cost of wiring and the needed labour. From this perspective wireless sensor technology provides the capability to provide reliable sensor data at the required temporal and spatial granularity associated with building energy management. In this paper, a wireless sensor network mote hardware design and implementation is presented for a building energy management application. Appropriate sensors were selected and interfaced with the developed system based on user requirements to meet both the building monitoring and metering requirements. Beside the sensing capability, actuation and interfacing to external meters/sensors are provided to perform different management control and data recording tasks associated with minimisation of energy consumption in the built environment and the development of appropriate Building information models(BIM)to enable the design and development of energy efficient spaces.

The development of a computer model to optimize the performance of a 50kWp photovoltaic system

A computer model has been developed to optimize the performance of a 50kWp photovoltaic system which supplies electrical energy to a dairy farm at Fota Island in Cork Harbour. Optimization of the system involves maximising the efficiency and increasing the performance and reliability of each hardware unit. The model accepts horizontal insolation, ambient temperature, wind speed, wind direction and load demand as inputs. An optimization program uses the computer model to simulate the optimum operating conditions. From this analysis, criteria are established which are used to improve the photovoltaic system operation. This thesis describes the model concepts, the model implementation and the model verification procedures used during development. It also describes the techniques which are used during system optimization. The software, which is written in FORTRAN, is structured in modular units to provide logical and efficient programming. These modular units may also be used in the modelling and optimization of other photovoltaic systems.

Development of large-scale colloidal crystallisation methods for the production of photonic crystals

Colloidal photonic crystals have potential light manipulation applications including; fabrication of efficient lasers and LEDs, improved optical sensors and interconnects, and improving photovoltaic efficiencies. One road-block of colloidal selfassembly is their inherent defects; however, they can be manufactured cost effectively into large area films compared to micro-fabrication methods. This thesis investigates production of ‘large-area’ colloidal photonic crystals by sonication, under oil co-crystallization and controlled evaporation, with a view to reducing cracking and other defects. A simple monotonic Stöber particle synthesis method was developed producing silica particles in the range of 80 to 600nm in a single step. An analytical method assesses the quality of surface particle ordering in a semiquantitative manner was developed. Using fast Fourier transform (FFT) spot intensities, a grey scale symmetry area method, has been used to quantify the FFT profiles. Adding ultrasonic vibrations during film formation demonstrated large areas could be assembled rapidly, however film ordering suffered as a result. Under oil cocrystallisation results in the particles being bound together during film formation. While having potential to form large areas, it requires further refinement to be established as a production technique. Achieving high quality photonic crystals bonded with low concentrations (<5%) of polymeric adhesives while maintaining refractive index contrast, proved difficult and degraded the film’s uniformity. A controlled evaporation method, using a mixed solvent suspension, represents the most promising method to produce high quality films over large areas, 75mm x 25mm. During this mixed solvent approach, the film is kept in the wet state longer, thus reducing cracks developing during the drying stage. These films are crack-free up to a critical thickness, and show very large domains, which are visible in low magnification SEM images as Moiré fringe patterns. Higher magnification reveals separation between alternate fringe patterns are domain boundaries between individual crystalline growth fronts.

Urbanization effects on welfare and income diversification strategies of peri-urban farm households in Tigray, Northern Ethiopia: An empirical analysis

Urban areas in many developing countries are expanding rapidly by incorporating nearby subsistence farming communities. This has a direct effect on the consumption and production behaviours of the farm households but empirical evidence is sparse. This thesis investigated the effects of rapid urbanization and the associated policies on welfare of subsistence farm households in peri-urban areas using a panel dataset from Tigray, Ethiopia. The study revealed a number of important issues emerging with the rapid urban expansion. Firstly, private asset holdings and consumption expenditure of farm households, that have been incorporated into urban administration, has decreased. Secondly, factors that influence the farm households’ welfare and vulnerability depend on the administration they belong to, urban or rural. Gender and literacy of the household head have significant roles for the urban farm households to fall back into and/or move out of poverty. However, livestock holding and share of farm income are the most important factors for rural households. Thirdly, the study discloses that farming continues to be important source of income and income diversification is the principal strategy. Participation in nonfarm employment is less for farm households in urban than rural areas. Adult labour, size of the local market and past experience in the nonfarm sector improves the likelihood of engaging in skilled nonfarm employment opportunities. But money, given as compensation for the land taken away, is not crucial for the household to engage in better paying nonfarm employments. Production behaviour of the better-off farm households is the same, regardless of the administration they belong to. However, the urban poor participate less in nonfarm employment compared to the rural poor. These findings signify the gradual development of urban-induced poverty in peri-urban areas. In the case of labour poor households, introducing urban safety net programmes could improve asset productivity and provide further protection.