Integrated spot size converters for InP based photonic systems

The ever increasing demand for broadband communications requires sophisticated devices. Photonic integrated circuits (PICs) are an approach that fulfills those requirements. PICs enable the integration of different optical modules on a single chip. Low loss fiber coupling and simplified packaging are key issues in keeping the price of PICs at a low level. Integrated spot size converters (SSC) offer an opportunity to accomplish this. Design, fabrication and characterization of SSCs based on an asymmetric twin waveguide (ATG) at a wavelength of 1.55 μm are the main elements of this dissertation. It is theoretically and experimentally shown that a passive ATG facilitates a polarization filter mechanism. A reproducible InP process guideline is developed that achieves vertical waveguides with smooth sidewalls. Birefringence and resonant coupling are used in an ATG to enable a polarization filtering and splitting mechanism. For the first time such a filter is experimentally shown. At a wavelength of 1610 nm a power extinction ratio of (1.6 ± 0.2) dB was measured for the TE- polarization in a single approximately 372 μm long TM- pass polarizer. A TE-pass polarizer with a similar length was demonstrated with a TM/TE-power extinction ratio of (0.7 ± 0.2) dB at 1610 nm. The refractive indices of two different InGaAsP compositions, required for a SSC, are measured by the reflection spectroscopy technique. A SSC layout for dielectric-free fabricated compact photodetectors is adjusted to those index values. The development and the results of the final fabrication procedure for the ATG concept are outlined. The etch rate, sidewall roughness and selectivity of a Cl2/CH4/H2 based inductively coupled plasma (ICP) etch are investigated by a design of experiment approach. The passivation effect of CH4 is illustrated for the first time. Conditions are determined for etching smooth and vertical sidewalls up to a depth of 5 μm.

Biomethane production from grass silage: laboratory assessment to maximise yields

On-farm biogas production is typically associated with forage maize as the biomass source. Digesters are designed and operated with the focus of optimising the conditions for this feedstock. Thus, such systems may not be ideally suited to the digestion of grass. Ireland has ca. 3.85 million ha of grassland. Annual excess grass, surplus to livestock requirements, could potentially fuel an anaerobic digestion industry. Biomethane associated with biomass from 1.1 % of grassland in Ireland, could potentially generate over 10 % renewable energy supply in transport. This study aims to identify and optimise technologies for the production of biomethane from grass silage. Mono-digestion of grass silage and co-digestion with slurry, as would occur on Irish farms, is investigated in laboratory trials. Grass silage was shown to have 7 times greater methane potential than dairy slurry on a fresh weight basis (107 m3 t-1 v 16 m3 t-1). However, comprehensive trace element profiles indicated that cobalt, iron and nickel are deficient in mono-digestion of grass silage at a high organic loading rate (OLR) of 4.0 kg VS m-3 d-1. The addition of a slurry co-substrate was beneficial due to its wealth of essential trace elements. To stimulate hydrolysis of high lignocellulose grass silage, particle size reduction (physical) and rumen fluid addition (biological) were investigated. In a continuous trial, digestion of grass silage of <1 cm particle size achieved a specific methane yield of 371 L CH4 kg-1 VS when coupled with rumen fluid addition. The concept of demand driven biogas was also examined in a two-phase digestion system (leaching with UASB). When demand for electricity is low it is recommended to disconnect the UASB from the system and recirculate rumen fluid to increase volatile fatty acid (VFA) and soluble chemical oxygen demand (SCOD) production whilst minimising volatile solids (VS) destruction. At times of high demand for electricity, connection of the UASB increases the destruction of volatiles and associated biogas production. The above experiments are intended to assess a range of biogas production options from grass silage with a specific focus on maximising methane yields and provide a guideline for feasible design and operation of on-farm digesters in Ireland.

Biomethane production from macroalgae

Irish brown seaweeds have been identified as a potential bio-resource with potentially high specific methane yields. Anaerobic digestion is deemed the most feasible technology due to its commercial viability for handling such wet feedstock. However, the biomethane potential of seaweed is highly dependent on its chemical composition which can vary by species type, cultivation method, and time of harvest. This study aims to investigate and optimize the process for the production of biomethane from Irish brown seaweeds focusing on the key technology bottlenecks including for seaweed characterization, biomethane potential assessment, optimization of long-term anaerobic digestion and suitable pre-treatment technologies to enhance potential gas yields. Laminaria digitata and Ascophyllum nodosum were tested for seasonal variation. From the characterization and batch digestion of L. digitata, August was found to be the optimal month for harvest due to high organic matter content, low level of ash and ultimately highest biomethane yield. The specific methane yield of 53 m3 CH4 t-1 wwt in August was 4.5 times higher than the yield in December (12 m3 CH4 t-1 wwt), with ash content the key factor in seasonal variation. For A. nodosum, the optimal harvest month was October with polyphenol content found to be a more influential factor than ash. The gross energy yields from both species were evaluated in the range of 116-200 GJ ha-1 yr-1. Continuous digestion trials were subsequently designed for S. latissima and L. digitata to optimize the key digestion parameters. Results from mono-digestion and co-digestion with dairy slurry revealed that both seaweeds could be digested at maximum biomethane efficiency to a loading rate of 4 kg VS m-3 d-1. Accumulation of salt in the digesters was a concern for long term digestion and it was reasoned that suitable pretreatment may be required prior to digestion. Various pre-treatments were subsequently tested on L. digitata to enhance the gas yield. It was found that maceration after hot water washing yielded 25% more specific methane and up to 54% salt removal as compared to untreated L. digitata. The experiments undertaken aim to assist in providing a basic guideline for feasible design and operation of seaweed digesters in Ireland.

Exploring the relationship between patterns of physical activity, sedentary behaviour and cardiometabolic health in middle-aged Irish adults

Background and Study Rationale Being physically active is a major contributor to both physical and mental health. More specifically, being physically active lowers risk of coronary heart disease, high blood pressure, stroke, metabolic syndrome (MetS), diabetes, certain cancers and depression, and increases cognitive function and wellbeing. The physiological mechanisms that occur in response to physical activity and the impact of total physical activity and sedentary behaviour on cardiometabolic health have been extensively studied. In contrast, limited data evaluating the specific effects of daily and weekly patterns of physical behaviour on cardiometabolic health exist. Additionally, no other study has examined interrelated patterns and minute-by-minute accumulation of physical behaviour throughout the day across week days in middle-aged adults. Study Aims The overarching aims of this thesis are firstly to describe patterns of behaviour throughout the day and week, and secondly to explore associations between these patterns and cardiometabolic health in a middle-aged population. The specific objectives are to: 1 Compare agreement between the International Physical Activity Questionnaire-Short Form (IPAQ-SF) and GENEActiv accelerometer-derived moderate-to-vigorous (MVPA) activity and secondly to compare their associations with a range of cardiometabolic and inflammatory markers in middle-aged adults. 2 Determine a suitable monitoring frame needed to reliably capture weekly, accelerometer-measured, activity in our population. 3 Identify groups of participants who have similar weekly patterns of physical behaviour, and determine if underlying patterns of cardiometabolic profiles exist among these groups. 4 Explore the variation of physical behaviour throughout the day to identify whether daily patterns of physical behaviour vary by cardiometabolic health. Methods All results in this thesis are based on data from a subsample of the Mitchelstown Cohort; 475 (46.1% males; mean aged 59.7±5.5 years) middle-aged Irish adults. Subjective physical activity levels were assessed using the IPAQ-SF. Participants wore the wrist GENEActiv accelerometer for 7 consecutive days. Data was collected at 100Hz and summarised into a signal magnitude vector using 60s epochs. Each time interval was categorised based on validated cut-offs. Data on cardiometabolic and inflammatory markers was collected according to standard protocol. Cardiometabolic outcomes (obesity, diabetes, hypertension and MetS) were defined according to internationally recognised definitions by World Health Organisation (WHO) and Irish Diabetes Federation (IDF). Results The results of the first chapter suggest that the IPAQ-SF lacks the sensitivity to assess patterning of activity and guideline adherence and assessing the relationship with cardiometabolic and inflammatory markers. Furthermore, GENEActiv accelerometer-derived MVPA appears to be better at detecting relationships with cardiometabolic and inflammatory markers. The second chapter examined variations in day-to-day physical behaviour levels between- and within-subjects. The main findings were that Sunday differed from all other days in the week for sedentary behaviour and light activity and that a large within-subject variation across days of the week for vigorous activity exists. Our data indicate that six days of monitoring, four weekdays plus Saturday and Sunday, are required to reliably estimate weekly habitual activity in all activity intensities. In the next chapter, latent profile analysis of weekly, interrelated patterns of physical behaviour identified four distinct physical behaviour patterns; Sedentary Group (15.9%), Sedentary; Lower Activity Group (28%), Sedentary; Higher Activity Group (44.2%) and a Physically Active Group (11.9%). Overall the Sedentary Group had poorer outcomes, characterised by unfavourable cardiometabolic and inflammatory profiles. The remaining classes were characterised by healthier cardiometabolic profiles with lower sedentary behaviour levels. The final chapter, which aimed to compare daily cumulative patterns of minute-by-minute physical behaviour intensities across those with and without MetS, revealed significant differences in weekday and weekend day MVPA. In particular, those with MetS start accumulating MVPA later in the day and for a shorted day period. Conclusion In conclusion, the results of this thesis add to the evidence base regards an optimal monitoring period for physical behaviour measurement to accurately capture weekly physical behaviour patterns. In addition, the results highlight whether weekly and daily distribution of activity is associated with cardiometabolic health and inflammatory profiles. The key findings of this thesis demonstrate the importance of daily and weekly physical behaviour patterning of activity intensity in the context of cardiometabolic health risk. In addition, these findings highlight the importance of using physical behaviour patterns of free-living adults observed in a population-based study to inform and aid health promotion activity programmes and primary care prevention and treatment strategies and development of future tailored physical activity based interventions.