Leaf galls in our native trees and shrubs

Plant galls constitute a branch of study and research which has been to me a subject of much interest for some time. At the start of this work, it was intended to include Plant galls in general, but after some months this was found to be too comprehensive a field and would in fact take a great many years to study fully. Even leaf galls alone, both of herbs and trees provide so large a field of investigation that ultimately I decided to confine my attention to those or our native trees and shrubs. Upon looking up the literature on this subject, it will be found that in nearly all cases, either the gall is described fully and mere mention made or the agent concerned in its production, or vice versa. This state of things is most unsatisfactory, as in studying galls, both the gall-maker and the gall formation must be examined in detail before it is safe to apply nomenclature. This work, therefore, sets out to give accurate and scientific descriptions of both galls and gall-makers. The difficulties encountered are manifold; firstly, our trees are all deciduous, hence, the collecting period is necessarily restricted to that time of the year between the appearance of the buds and the fall of the leaf. Secondly, the rearing of imagines is always difficult, especially in the case or the autumn gall; more will be said on this matter later. Lastly, due to war-time conditions much trouble was experienced in obtaining suitable literature and many invaluable books on this subject were unprocurable. The Plates at the back have all been copied from original material except in the case or the Phytoptid mites which have been sketched with the help of illustrations, the reason for this being the difficulty of making suitable mounts of these minute creatures, Where possible all stages or at least larva and imago have been sketched, together with the host plant and the type of gall-formation produced. Slides have also been made of most larvae and the imagines attached to cards and pinned on to pith or cork in the usual manner.

Characterisation and application of fruit by-products as novel ingredients in gluten-free products

The physicochemical and nutritional properties of two fruit by-products were initially studied. Apple pomace (AP) contained a high level of fibre and pectin. The isolated AP pectin had a high level of methylation which developed viscous pastes. Orange pomace also had high levels of fibre and pectin, and it was an abundant source of minerals such as potassium and magnesium. Due to the fibrous properties of orange pomace flour, proofing and water addition were studied in a bread formulation. When added at levels greater than 6%, the loaf volume decreased. An optimised formulation and proofing time was derived using the optimisation tool; these consisted of 5.5% orange pomace, 94.6% water inclusion and with 49 minutes proofing. These optimised parameters doubled the total dietary fibre content of the bread compared to the original control. Pasting results showed how orange pomace inclusions reduced the final viscosity of the batter, reducing the occurrence of starch gelatinisation. Rheological properties i.e. the storage modulus (G') and complex modulus (G*) increased in the orange pomace batter compared to the control batter. This demonstrates how the orange pomace as an ingredient improved the robustness of the formulation. Sensory panellists scored the orange pomace bread comparably to the control bread. Milled apple pomace was studied as a potential novel ingredient in an extruded snack. Parameters studied included apple pomace addition, die head temperature and screw speed. As screw speed increased the favourable extrudate characteristics such as radical expansion ratio, porosity and specific volume decreased. The inclusion of apple pomace had a negative effect on extrudate characteristics at levels greater than 8% addition. Including apple pomace reduced the hardness and increased the crispiness of the snack. The optimised and validated formulation and extrusion process contained the following parameters: 7.7% apple pomace, 150°C die head temperature and a screw speed of 69 rpm.