Preparation and characterisation of ceria particles

Cerium dioxide (ceria) nanoparticles have been the subject of intense academic and industrial interest. Ceria has a host of applications but academic interest largely stems from their use in the modern automotive catalyst but it is also of interest because of many other application areas notably as the abrasive in chemical-mechanical planarisation of silicon substrates. Recently, ceria has been the focus of research investigating health effects of nanoparticles. Importantly, the role of non-stoichiometry in ceria nanoparticles is implicated in their biochemistry. Ceria has well understood non-stoichiometry based around the ease of formation of anion vacancies and these can form ordered superstructures based around the fluorite lattice structure exhibited by ceria. The anion vacancies are associated with localised or small polaron states formed by the electrons that remain after oxygen desorption. In simple terms these electrons combine with Ce4+ states to form Ce3+ states whose larger ionic radii is associated with a lattice expansion compared to stoichiometric CeO2. This is a very simplistic explanation and greater defect chemistry complexity is suggested by more recent work. Various authors have shown that vacancies are mobile and may result in vacancy clustering. Ceria nanoparticles are of particular interest because of the high activity and surface area of small particulates. The sensitivity of the cerium electronic band structure to environment would suggest that changes in the properties of ceria particles at nanoscale dimensions might be expected. Notably many authors report a lattice expansion with reducing particle size (largely confined to sub-10 nm particles). Most authors assign increased lattice dimensions to the presence of a surface stable Ce2O3 type layer at low nanoparticle dimensions. However, our understanding of oxide nanoparticles is limited and their full and quantitative characterisation offers serious challenges. In a series of chemical preparations by ourselves we see little evidence of a consistent model emerging to explain lattice parameter changes with nanoparticle size. Based on these results and a review of the literature it is worthwhile asking if a model of surface enhanced defect concentration is consistent with known cerium/cerium oxide chemistries, whether this is applicable to a range of different synthesis methods and if a more consistent description is possible. In Chapter one the science of cerium oxide is outlined including the crystal structure, defect chemistry and different oxidation states available. The uses and applications of cerium oxide are also discussed as well as modelling of the lattice parameter and the doping of the ceria lattice. Chapter two describes both the synthesis techniques and the analytical methods employed to execute this research. Chapter three focuses on high surface area ceria nano-particles and how these have been prepared using a citrate sol-gel precipitation method. Changes to the particle size have been made by calcining the ceria powders at different temperatures. X-ray diffraction methods were used to determine their lattice parameters. The particles sizes were also assessed using transmission electron microscopy (TEM), scanning electron microscopy (SEM), and BET, and, the lattice parameter was found to decrease with decreasing particle size. The results are discussed in light of the role played by surface tension effects. Chapter four describes the morphological and structural characterization of crystalline CeO2 nanoparticles prepared by forward and reverse precipitation techniques and compares these by powder x-ray diffraction (PXRD), nitrogen adsorption (BET) and high resolution transmission electron microscopy (HRTEM) analysis. The two routes give quite different materials although in both cases the products are essentially highly crystalline, dense particulates. It was found that the reverse precipitation technique gave the smallest crystallites with the narrowest size dispersion. This route also gave as-synthesised materials with higher surface areas. HRTEM confirmed the observations made from PXRD data and showed that the two methods resulted in quite different morphologies and surface chemistries. The forward route gives products with significantly greater densities of Ce3+ species compared to the reverse route. Data are explained using known precipitation chemistry and kinetic effects. Chapter five centres on the addition of terbia to ceria and has been investigated using XRD, XRF, XPS and TEM. Good solid solutions were formed across the entire composition range and there was no evidence for the formation of mixed phases or surface segregation over either the composition or temperature range investigated. Both Tb3+ and Tb4+ ions exist within the solution and the ratios of these cations are consistent with the addition of Tb8O15 to the fluorite ceria structure across a wide range of compositions. Local regions of anion vacancy ordering may be visible for small crystallites. There is no evidence of significant Ce3+ ion concentrations formed at the surface or in the bulk by the addition of terbia. The lattice parameter of these materials was seen to decrease with decreasing crystallite size. This is consistent with increased surface tension effects at small dimension. Chapter six reviews size related lattice parameter changes and surface defects in ceria nanocrystals. Ceria (CeO2) has many important applications, notably in catalysis. Many of its uses rely on generating nanodimensioned particles. Ceria has important redox chemistry where Ce4+ cations can be reversibly reduced to Ce3+ cations and associated anion vacancies. The significantly larger size of Ce3+ (compared with Ce4+) has been shown to result in lattice expansion. Many authors have observed lattice expansion in nanodimensioned crystals (nanocrystals), and these have been attributed to the presence of stabilized Ce3+ -anion vacancy combinations in these systems. Experimental results presented here show (i) that significant, but complex changes in the lattice parameter with size can occur in 2-500 nm crystallites, (ii) that there is a definitive relationship between defect chemistry and the lattice parameter in ceria nanocrystals, and (iii) that the stabilizing mechanism for the Ce3+ -anion vacancy defects at the surface of ceria nanocrystals is determined by the size, the surface status, and the analysis conditions. In this work, both lattice expansion and a more unusual lattice contraction in ultrafine nanocrystals are observed. The lattice deformations seen can be defined as a function of both the anion vacancy (hydroxyl) concentration in the nanocrystal and the intensity of the additional pressure imposed by the surface tension on the crystal. The expansion of lattice parameters in ceria nanocrystals is attributed to a number of factors, most notably, the presence of any hydroxyl moieties in the materials. Thus, a very careful understanding of the synthesis combined with characterization is required to understand the surface chemistry of ceria nanocrystals.

An examination of the role of the sports and exercise medicine specialist in Ireland- from epidemiology to treatment

The expansion of the specialty of sports and exercise medicine (SEM) is a relatively recent development in the medical community and the role of the SEM specialist continues to evolve and develop. The SEM specialist is ideally placed to care for all aspects of physical activity not only in athletes but also in the general population. As an advocate for physical activity the SEM specialist plays a broad role in advising safe effective sports and recreation participation; screening for disease related to sports participation; examining and contributing to the evidence behind treatment strategies and evaluating any potential negative impact of sports injury prevention measures. In this thesis I will demonstrate the breadth of the role the Sports and Exercise Medicine Specialist from epidemiology to in-depth examination of treatment strategies. In Chapter 2, I examined the epidemiology of sports and recreation related injury (SRI) in Ireland, an area that has previously been poorly studied. We report on 3,172 SRI (14% of total presentations) presentations to the ED over 6 months. Paediatric patients (4-16 yrs) were over represented comprising 39.9% of all SRI presentation compared to 16% of total ED presentations and 18% of the general population. These injuries were serious (32% fractures) and though 49% of injuries occurred during organised competition/practice, 41.5% occurred during recreation-most often at home. In Chapter 3, I examined risk factors associated with hand injury in hurling. The previous chapter highlighted the importance of a firm evidence base underpinning treatment strategies. When measures to improve welfare are introduced not only must potential benefits be measured, so too must potential unwanted adverse outcomes. In this study I examined a cohort of adult hurlers who had presented to the ED with a hurling related injury in order to highlight the variables associated with hand injury in this population. I found the athletes who wore a helmet were far more likely (OR 3.15 95% CI (1.51-6.56) p= 0.002) to suffer a hand injury than athletes who did not. Very few of those interviewed (4.9%) used hand protection compared to 65% who used helmet and faceguard. The introduction of the helmet and faceguard in hurling has undeniably decreased the incidence of head and face injury in hurling. However in tandem with this intervention several observational studies have demonstrated an increase in the occurrence of hurling related hand injuries. This study highlights the importance of being cognisant of unanticipated or unintended consequences when implementing a new treatment or intervention. In Chapter 4, I examined the role of population screening as applied to sport and exercise. This is a controversial area –cardiac screening in the exercising population has been the subject of much debate. Specifically I define the prevalence of exercise induced bronchoconstriction (EIB) using a specifically designed sports specific field-testing protocol. In this study I found almost a third (29%) of a full international professional rugby squad had confirmed asthma or EIB, as compared with 12-15% of the general population. Despite regular medical screening, 5 ‘new’ untreated cases (12%) were elicited by the challenge test and in the group already on treatment for asthma/EIB; over 50% still displayed EIB. In Chapter 5, I examined the evidence supporting current treatment options for iliotibial band friction syndrome (ITBFS). The practice of sports medicine has traditionally been ‘eminence based’ rather than ‘evidence based’. This may be problematic as some of these practices are based upon flawed principles- for example the treatment of iliotibial band friction syndrome (ITBFS). In this chapter, using cadaveric and biomechanical studies I expand upon the growing base of evidence clarifying the anatomy and biomechanics of the area-thereby re-examining the principles on which current treatments are based. The role of the SEM specialist is broad; we chose to examine specific examples of some of the roles that they execute. An understanding of the epidemiology of SRI presenting to the ED has implications for individual patients, sports governing bodies and health resource utilisation. Population screening is an important tool in health promotion and disease prevention in the general population. Screening in SEM may have similar less well-recognised benefits. The SEM specialist needs to be conversant in screening for medical conditions concerning physical activity. A comprehensive understanding of the pathophysiology of a disease is required for its diagnosis and treatment. Due to the ongoing evolution of SEM many treatments are eminence-based rather than evidence‐based practice. Continued re-examination of the fundamentals of current practice is essential. An awareness of potential unwanted side effects is essential prior to the introduction of any new treatment or intervention. The SEM specialist is ideally placed to advise sports governing bodies on these issues prior to and during their implementation.