Effect of solder volume on joint shape with variable chip-to-board contact pad ratio

The objective of this paper is to investigate the effect of the pad size ratio between the chip and board end of a solder joint on the shape of that solder joint in combination with the solder volume available. The shape of the solder joint is correlated to its reliability and thus of importance. For low density chip bond pad applications Flip Chip (FC) manufacturing costs can be kept down by using larger size board pads suitable for solder application. By using “Surface Evolver” software package the solder joint shapes associated with different size/shape solder preforms and chip/board pad ratios are predicted. In this case a so called Flip-Chip Over Hole (FCOH) assembly format has been used. Assembly trials involved the deposition of lead-free 99.3Sn0.7Cu solder on the board side, followed by reflow, an underfill process and back die encapsulation. During the assembly work pad off-sets occurred that have been taken into account for the Surface Evolver solder joint shape prediction and accurately matched the real assembly. Overall, good correlation was found between the simulated solder joint shape and the actual fabricated solder joint shapes. Solder preforms were found to exhibit better control over the solder volume. Reflow simulation of commercially available solder preform volumes suggests that for a fixed stand-off height and chip-board pad ratio, the solder volume value and the surface tension determines the shape of the joint.

Comparison of deterministic, stochastic and fuzzy logic uncertainty modelling for capacity extension projects of DI/WFI pharmaceutical plant utilities with variable/dynamic demand

The last 30 years have seen Fuzzy Logic (FL) emerging as a method either complementing or challenging stochastic methods as the traditional method of modelling uncertainty. But the circumstances under which FL or stochastic methods should be used are shrouded in disagreement, because the areas of application of statistical and FL methods are overlapping with differences in opinion as to when which method should be used. Lacking are practically relevant case studies comparing these two methods. This work compares stochastic and FL methods for the assessment of spare capacity on the example of pharmaceutical high purity water (HPW) utility systems. The goal of this study was to find the most appropriate method modelling uncertainty in industrial scale HPW systems. The results provide evidence which suggests that stochastic methods are superior to the methods of FL in simulating uncertainty in chemical plant utilities including HPW systems in typical cases whereby extreme events, for example peaks in demand, or day-to-day variation rather than average values are of interest. The average production output or other statistical measures may, for instance, be of interest in the assessment of workshops. Furthermore the results indicate that the stochastic model should be used only if found necessary by a deterministic simulation. Consequently, this thesis concludes that either deterministic or stochastic methods should be used to simulate uncertainty in chemical plant utility systems and by extension some process system because extreme events or the modelling of day-to-day variation are important in capacity extension projects. Other reasons supporting the suggestion that stochastic HPW models are preferred to FL HPW models include: 1. The computer code for stochastic models is typically less complex than a FL models, thus reducing code maintenance and validation issues. 2. In many respects FL models are similar to deterministic models. Thus the need for a FL model over a deterministic model is questionable in the case of industrial scale HPW systems as presented here (as well as other similar systems) since the latter requires simpler models. 3. A FL model may be difficult to "sell" to an end-user as its results represent "approximate reasoning" a definition of which is, however, lacking. 4. Stochastic models may be applied with some relatively minor modifications on other systems, whereas FL models may not. For instance, the stochastic HPW system could be used to model municipal drinking water systems, whereas the FL HPW model should or could not be used on such systems. This is because the FL and stochastic model philosophies of a HPW system are fundamentally different. The stochastic model sees schedule and volume uncertainties as random phenomena described by statistical distributions based on either estimated or historical data. The FL model, on the other hand, simulates schedule uncertainties based on estimated operator behaviour e.g. tiredness of the operators and their working schedule. But in a municipal drinking water distribution system the notion of "operator" breaks down. 5. Stochastic methods can account for uncertainties that are difficult to model with FL. The FL HPW system model does not account for dispensed volume uncertainty, as there appears to be no reasonable method to account for it with FL whereas the stochastic model includes volume uncertainty.

The effects of copayment policies on adherence to prescription medicines in publicly insured populations

Introduction: Copayments for prescriptions are associated with decreased adherence to medicines resulting in increased health service utilisation, morbidity and mortality. In October 2010 a 50c copayment per prescription item was introduced on the General Medical Services (GMS) scheme in Ireland, the national public health insurance programme for low-income and older people. The copayment was increased to €1.50 per prescription item in January 2013. To date, the impact of these copayments on adherence to prescription medicines on the GMS scheme has not been assessed. Given that the GMS population comprises more than 40% of the Irish population, this presents an important public health problem. The aim of this thesis was to assess the impact of two prescription copayments, 50c and €1.50, on adherence to medicines.Methods: In Chapter 2 the published literature was systematically reviewed with meta-analysis to a) develop evidence on cost-sharing for prescriptions and adherence to medicines and b) develop evidence for an alternative policy option; removal of copayments. The core research question of this thesis was addressed by a large before and after longitudinal study, with comparator group, using the national pharmacy claims database. New users of essential and less-essential medicines were included in the study with sample sizes ranging from 7,007 to 136,111 individuals in different medication groups. Segmented regression was used with generalised estimating equations to allow for correlations between repeated monthly measurements of adherence. A qualitative study involving 24 individuals was conducted to assess patient attitudes towards the 50c copayment policy. The qualitative and quantitative findings were integrated in the discussion chapter of the thesis. The vast majority of the literature on this topic area is generated in North America, therefore a test of generalisability was carried out in Chapter 5 by comparing the impact of two similar copayment interventions on adherence, one in the U.S. and one in Ireland. The method used to measure adherence in Chapters 3 and 5 was validated in Chapter 6. Results: The systematic review with meta-analysis demonstrated an 11% (95% CI 1.09 to 1.14) increased odds of non-adherence when publicly insured populations were exposed to copayments. The second systematic review found moderate but variable improvements in adherence after removal/reduction of copayments in a general population. The core paper of this thesis found that both the 50c and €1.50 copayments on the GMS scheme were associated with larger reductions in adherence to less-essential medicines than essential medicines directly after the implementation of policies. An important exception to this pattern was observed; adherence to anti-depressant medications declined by a larger extent than adherence to other essential medicines after both copayments. The cross country comparison indicated that North American evidence on cost-sharing for prescriptions is not automatically generalisable to the Irish setting. Irish patients had greater immediate decreases of -5.3% (95% CI -6.9 to -3.7) and -2.8% (95% CI -4.9 to -0.7) in adherence to anti-hypertensives and anti-hyperlipidaemic medicines, respectively, directly after the policy changes, relative to their U.S. counterparts. In the long term, however, the U.S. and Irish populations had similar behaviours. The concordance study highlighted the possibility of a measurement bias occurring for the measurement of adherence to non-steroidal anti-inflammatory drugs in Chapter 3. Conclusions: This thesis has presented two reviews of international cost-sharing policies, an assessment of the generalisability of international evidence and both qualitative and quantitative examinations of cost-sharing policies for prescription medicines on the GMS scheme in Ireland. It was found that the introduction of a 50c copayment and its subsequent increase to €1.50 on the GMS scheme had a larger impact on adherence to less-essential medicines relative to essential medicines, with the exception of anti-depressant medications. This is in line with policy objectives to reduce moral hazard and is therefore demonstrative of the value of such policies. There are however some caveats. The copayment now stands at €2.50 per prescription item. The impact of this increase in copayment has yet to be assessed which is an obvious point for future research. Careful monitoring for adverse effects in socio-economically disadvantaged groups within the GMS population is also warranted. International evidence can be applied to the Irish setting to aid in future decision making in this area, but not without placing it in the local context first. Patients accepted the introduction of the 50c charge, however did voice concerns over a rising price. The challenge for policymakers is to find the ‘optimal copayment’ – whereby moral hazard is decreased, but access to essential chronic disease medicines that provide advantages at the population level is not deterred. This evidence presented in this thesis will be utilisable for future policy-making in Ireland.

Religious memory as a conveyor of authoritative tradition: The necessary and essential component in a definition of religion

In a landmark book published in 2000, the sociologist Danièle Hervieu-Léger defined religion as a chain of memory, by which she meant that within religious communities remembered traditions are transmitted with an overpowering authority from generation to generation. After analysing Hervieu-Léger’s sociological approach as overcoming the dichotomy between substantive and functional definitions, this article compares a ritual honouring the ancestors in which a medium becomes possessed by the senior elder’s ancestor spirit among the Shona of Zimbabwe with a cleansing ritual performed by a Celtic shaman in New Hampshire, USA. In both instances, despite different social and historical contexts, appeals are made to an authoritative tradition to legitimize the rituals performed. This lends support to the claim that the authoritative transmission of a remembered tradition, by exercising an overwhelming power over communities, even if the memory of such a tradition is merely postulated, identifies the necessary and essential component for any activity to be labelled “religious”.