Established cardiovascular disease and CVD risk factors in a primary care population of middle-aged Irish men and women

Contemporary Irish data on the prevalence of major cardiovascular disease (CVD) risk factors are sparse. The primary aims of this study were (1) to estimate the prevalence of major cardiovascular disease risk factors, including Type 2 Diabetes Mellitus, in the general population of men and women between the ages of 50 and 69 years; and (2) to estimate the proportion of individuals in this age group at high absolute risk of cardiovascular disease events on the basis of pre-existing cardiovascular disease or as defined by the Framingham equation. Participants were drawn from the practice lists of 17 general practices in Cork and Kerry using stratified random sampling. A total of 1018 people attended for screening (490 men, 48%) from 1473 who were invited, a response rate of 69.1%. Cardiovascular disease risk factors and glucose intolerance are common in the population of men and women aged between 50 and 69 years. Almost half the participants were overweight and a further quarter met current international criteria for obesity, one of the highest recorded prevalence rates for obesity in a European population sample. Forty per cent of the population reported minimal levels of physical activity and 19% were current cigarette smokers. Approximately half the sample had blood pressure readings consistent with international criteria for the diagnosis of hypertension, but only 38% of these individuals were known to be hypertensive. Eighty per cent of the population sample had a cholesterol concentration in excess of 5 mmol/l. Almost 4% of the population had Type 2 Diabetes Mellitus, of whom 30% were previously undiagnosed. A total of 137 participants (13.5%) had a history or ECG findings consistent with established cardiovascular disease. Of the remaining 881 individuals in the primary prevention population, a total of 20 high-risk individuals (19 male) had a risk of a coronary heart disease event 30% over ten years according to the Framingham risk equation, giving an overall population prevalence of 2.0% (95% CI 1.3 - 3.0). At a risk level 20% over ten years, an additional 91 individuals (8.9%) were identified. Thus a total of 24.4% of the population were at risk either through pre-existing CVD (13.5%) or an estimated 10-year risk exceeding 20% according to the Framingham risk equation (10.9%). Thus a substantial proportion of middle-aged men are at high risk of CVD. The findings emphasise the scale of the CVD epidemic in Ireland and the need for ongoing monitoring of risk factors at the population level and the need to develop preventive strategies at both the clinical and societal level.

Irish dental practitioners perceived barriers to the care of patients with special healthcare needs and the effect of postgraduate training

Inequalities in oral healthcare service provision to people with special health needs have been reported in the Republic of Ireland. These include higher unmet dental treatment needs and longer waiting period to access routine dental treatment than the general population. Aim: The aims of this study were to determine the groups of patients with special needs which pose a challenge to manage in the dental surgery and to examine perceived barriers to the care of these patients. We aimed to determine whether postgraduate training in the management of these patients increases the practitioners’ frequency of treatment and their desire for further training in this area. Methods: A questionnaire was used to survey 326 randomly selected dentists from the Dental Council’s register of dentists. Questionnaire and information sheets explaining the purpose of the survey, confidentiality and anonymity of the responses were posted to the dentists. Results: The results showed that children with intellectual disability posed the biggest challenge for dentists to manage in the dental surgery. Behaviour management issues and the degree of disability were perceived by many dentists as factors that would have high effects on their willingness to treat patients with special needs. Dentists who have postgraduate training in the management of patients with special needs were significantly more willing to treat these patients and to seek additional training in the future. Conclusion: There are links between the training and the willingness of practitioners to undertake dental treatment or patients with special healthcare needs.

The use of atraumatic restorative treatment in elderly patients: a randomised controlled clinical trial

Objectives: to assess elderly patients’ dental status and dental habits and compare the survival rates, impact on patients’ quality of life and cost-effectiveness of Atraumatic Restorative Treatment (ART) and a conventional treatment (CT) to restore carious lesions in an elderly population. Methods: In this randomised clinical trial, 99 independently living adults (65-90 yrs) with carious lesions were randomly allocated to receive either ART or CT. Details of restored, missing and carious teeth were recorded and patients answered some questions about their oral hygiene and dental attendance habits. Direct and indirect costs were measured based on treatment time, materials and labour. Effectiveness was measured using restoration survival percentage after one year. The survival of restorations was assessed 6 months and one year after restoration placement by an independent examiner. Oralhealth related quality of life (OHRQoL) was assessed using the OHIP-14 at baseline and 2 months after treatment together with a global transition statement. Results: The patient sample comprised 46 (46.46%) male and 53 (53.54) female participants at baseline, with a mean age of 73.18 (SD=6.76). The mean DMFT of the entire sample was 27.10. Ninety patients and 268 restorations could be assessed after one year, 127 ART (46 patients) and 141 conventional restorations (44 patients). 93.7% and 97.2% of the restorations placed were considered successful in the ART and CT groups, respectively. The OHIP scores did not change dramatically 2 months after treatment, in either group. The global transition scale showed an improvement in overall oral health after treatment for the majority of patients. The ART were more cost-effective compared to the CT restorations. Conclusions: ART presented survival rates similar to CT after 1 year and was a more cost-effective alternative to treat the elderly.

Accuracy of computer-aided design/computer-assisted manufacture (CAD/CAM) fabricated dental restorations: a comparative study

Introduction: Computer-Aided-Design (CAD) and Computer-Aided-Manufacture (CAM) has been developed to fabricate fixed dental restorations accurately, faster and improve cost effectiveness of manufacture when compared to the conventional method. Two main methods exist in dental CAD/CAM technology: the subtractive and additive methods. While fitting accuracy of both methods has been explored, no study yet has compared the fabricated restoration (CAM output) to its CAD in terms of accuracy. The aim of this present study was to compare the output of various dental CAM routes to a sole initial CAD and establish the accuracy of fabrication. The internal fit of the various CAM routes were also investigated. The null hypotheses tested were: 1) no significant differences observed between the CAM output to the CAD and 2) no significant differences observed between the various CAM routes. Methods: An aluminium master model of a standard premolar preparation was scanned with a contact dental scanner (Incise, Renishaw, UK). A single CAD was created on the scanned master model (InciseCAD software, V2.5.0.140, UK). Twenty copings were then fabricated by sending the single CAD to a multitude of CAM routes. The copings were grouped (n=5) as: Laser sintered CoCrMo (LS), 5-axis milled CoCrMo (MCoCrMo), 3-axis milled zirconia (ZAx3) and 4-axis milled zirconia (ZAx4). All copings were micro-CT scanned (Phoenix X-Ray, Nanotom-S, Germany, power: 155kV, current: 60µA, 3600 projections) to produce 3-Dimensional (3D) models. A novel methodology was created to superimpose the micro-CT scans with the CAD (GOM Inspect software, V7.5SR2, Germany) to indicate inaccuracies in manufacturing. The accuracy in terms of coping volume was explored. The distances from the surfaces of the micro-CT 3D models to the surfaces of the CAD model (CAD Deviation) were investigated after creating surface colour deviation maps. Localised digital sections of the deviations (Occlusal, Axial and Cervical) and selected focussed areas were then quantitatively measured using software (GOM Inspect software, Germany). A novel methodology was also explored to digitally align (Rhino software, V5, USA) the micro-CT scans with the master model to investigate internal fit. Fifty digital cross sections of the aligned scans were created. Point-to-point distances were measured at 5 levels at each cross section. The five levels were: Vertical Marginal Fit (VF), Absolute Marginal Fit (AM), Axio-margin Fit (AMF), Axial Fit (AF) and Occlusal Fit (OF). Results: The results of the volume measurement were summarised as: VM-CoCrMo (62.8mm3 ) > VZax3 (59.4mm3 ) > VCAD (57mm3 ) > VZax4 (56.1mm3 ) > VLS (52.5mm3 ) and were all significantly different (p presented as areas with different colour. No significant differences were observed at the internal aspect of the cervical aspect between all groups of copings. Significant differences (p< M-CoCrMo Internal Occlusal, Internal Axial and External Axial 2 ZAx3 > ZAx4 External Occlusal, External Cervical 3 ZAx3 < ZAx4 Internal Occlusal 4 M-CoCrMo > ZAx4 Internal Occlusal and Internal Axial The mean values of AMF and AF were significantly (p M-CoCrMo and CAD > ZAx4. Only VF of M-CoCrMo was comparable with the CAD Internal Fit. All VF and AM values were within the clinically acceptable fit (120µm). Conclusion: The investigated CAM methods reproduced the CAD accurately at the internal cervical aspect of the copings. However, localised deviations at axial and occlusal aspects of the copings may suggest the need for modifications in these areas prior to fitting and veneering with porcelain. The CAM groups evaluated also showed different levels of Internal Fit thus rejecting the null hypotheses. The novel non-destructive methodologies for CAD/CAM accuracy and internal fit testing presented in this thesis may be a useful evaluation tool for similar applications.

The utility of survey and administrative data to generate information for research and outcomes-based oral health services development

The aim of this research, which focused on the Irish adult population, was to generate information for policymakers by applying statistical analyses and current technologies to oral health administrative and survey databases. Objectives included identifying socio-demographic influences on oral health and utilisation of dental services, comparing epidemiologically-estimated dental treatment need with treatment provided, and investigating the potential of a dental administrative database to provide information on utilisation of services and the volume and types of treatment provided over time. Information was extracted from the claims databases for the Dental Treatment Benefit Scheme (DTBS) for employed adults and the Dental Treatment Services Scheme (DTSS) for less-well-off adults, the National Surveys of Adult Oral Health, and the 2007 Survey of Lifestyle Attitudes and Nutrition in Ireland. Factors associated with utilisation and retention of natural teeth were analysed using count data models and logistic regression. The chi-square test and the student’s t-test were used to compare epidemiologically-estimated need in a representative sample of adults with treatment provided. Differences were found in dental care utilisation and tooth retention by Socio-Economic Status. An analysis of the five-year utilisation behaviour of a 2003 cohort of DTBS dental attendees revealed that age and being female were positively associated with visiting annually and number of treatments. Number of adults using the DTBS increased, and mean number of treatments per patient decreased, between 1997 and 2008. As a percentage of overall treatments, restorations, dentures, and extractions decreased, while prophylaxis increased. Differences were found between epidemiologically-estimated treatment need and treatment provided for those using the DTBS and DTSS. This research confirms the utility of survey and administrative data to generate knowledge for policymakers. Public administrative databases have not been designed for research purposes, but they have the potential to provide a wealth of knowledge on treatments provided and utilisation patterns.