Characterization of urban aerosol in Cork city (Ireland) using aerosol mass spectrometry

Ambient wintertime background urban aerosol in Cork city, Ireland, was characterized using aerosol mass spectrometry. During the three-week measurement study in 2009, 93% of the ca. 1 350 000 single particles characterized by an Aerosol Time-of-Flight Mass Spectrometer (TSI ATOFMS) were classified into five organic-rich particle types, internally mixed to different proportions with elemental carbon (EC), sulphate and nitrate, while the remaining 7% was predominantly inorganic in nature. Non-refractory PM1 aerosol was characterized using a High Resolution Time-of-Flight Aerosol Mass Spectrometer (Aerodyne HR-ToF-AMS) and was also found to comprise organic aerosol as the most abundant species (62 %), followed by nitrate (15 %), sulphate (9 %) and ammonium (9 %), and chloride (5 %). Positive matrix factorization (PMF) was applied to the HR-ToF-AMS organic matrix, and a five-factor solution was found to describe the variance in the data well. Specifically, "hydrocarbon-like" organic aerosol (HOA) comprised 20% of the mass, "low-volatility" oxygenated organic aerosol (LV-OOA) comprised 18 %, "biomass burning" organic aerosol (BBOA) comprised 23 %, non-wood solid-fuel combustion "peat and coal" organic aerosol (PCOA) comprised 21 %, and finally a species type characterized by primary m/z peaks at 41 and 55, similar to previously reported "cooking" organic aerosol (COA), but possessing different diurnal variations to what would be expected for cooking activities, contributed 18 %. Correlations between the different particle types obtained by the two aerosol mass spectrometers are also discussed. Despite wood, coal and peat being minor fuel types used for domestic space heating in urban areas, their relatively low combustion efficiencies result in a significant contribution to PM1 aerosol mass (44% and 28% of the total organic aerosol mass and non-refractory total PM1, respectively).Ambient wintertime background urban aerosol in Cork city, Ireland, was characterized using aerosol mass spectrometry. During the three-week measurement study in 2009, 93% of the ca. 1 350 000 single particles characterized by an Aerosol Time-of-Flight Mass Spectrometer (TSI ATOFMS) were classified into five organic-rich particle types, internally mixed to different proportions with elemental carbon (EC), sulphate and nitrate, while the remaining 7% was predominantly inorganic in nature. Non-refractory PM1 aerosol was characterized using a High Resolution Time-of-Flight Aerosol Mass Spectrometer (Aerodyne HR-ToF-AMS) and was also found to comprise organic aerosol as the most abundant species (62 %), followed by nitrate (15 %), sulphate (9 %) and ammonium (9 %), and chloride (5 %). Positive matrix factorization (PMF) was applied to the HR-ToF-AMS organic matrix, and a five-factor solution was found to describe the variance in the data well. Specifically, "hydrocarbon-like" organic aerosol (HOA) comprised 20% of the mass, "low-volatility" oxygenated organic aerosol (LV-OOA) comprised 18 %, "biomass burning" organic aerosol (BBOA) comprised 23 %, non-wood solid-fuel combustion "peat and coal" organic aerosol (PCOA) comprised 21 %, and finally a species type characterized by primary m/z peaks at 41 and 55, similar to previously reported "cooking" organic aerosol (COA), but possessing different diurnal variations to what would be expected for cooking activities, contributed 18 %. Correlations between the different particle types obtained by the two aerosol mass spectrometers are also discussed. Despite wood, coal and peat being minor fuel types used for domestic space heating in urban areas, their relatively low combustion efficiencies result in a significant contribution to PM1 aerosol mass (44% and 28% of the total organic aerosol mass and non-refractory total PM1, respectively).

Source apportionment of PM2.5 in Cork Harbour, Ireland using a combination of single particle mass spectrometry and quantitative semi-continuous measurements

An aerosol time-of-flight mass spectrometer (ATOFMS) was deployed for the measurement of the size resolved chemical composition of single particles at a site in Cork Harbour, Ireland for three weeks in August 2008. The ATOFMS was co-located with a suite of semi-continuous instrumentation for the measurement of particle number, elemental carbon (EC), organic carbon (OC), sulfate and particulate matter smaller than 2.5 μm in diameter (PM2.5). The temporality of the ambient ATOFMS particle classes was subsequently used in conjunction with the semi-continuous measurements to apportion PM2.5 mass using positive matrix factorisation. The synergy of the single particle classification procedure and positive matrix factorisation allowed for the identification of six factors, corresponding to vehicular traffic, marine, long-range transport, various combustion, domestic solid fuel combustion and shipping traffic with estimated contributions to the measured PM2.5 mass of 23%, 14%, 13%, 11%, 5% and 1.5% respectively. Shipping traffic was found to contribute 18% of the measured particle number (20–600 nm mobility diameter), and thus may have important implications for human health considering the size and composition of ship exhaust particles. The positive matrix factorisation procedure enabled a more refined interpretation of the single particle results by providing source contributions to PM2.5 mass, while the single particle data enabled the identification of additional factors not possible with typical semi-continuous measurements, including local shipping traffic.

Dentists’ requirements for continuing professional development in Ireland. A pilot study conducted at University College Cork

Aims: To determine the self-assessed continuing professional development (CPD) needs of dental practitioners and identify how each discipline can best be served by a dental CPD programme. To set findings in the context of the available literature and contribute to the development of CPD programmes. Method: Topics were arranged into eight disciplines: practice management; paediatric dentistry; preventive dentistry; orthodontics; behaviour management; dentistry for people with a disability; oral medicine and surgery; and, restorative dentistry. A web-based questionnaire was constructed and administered using a MarkClass 2.21 online survey tool. Results: Fifty-six self-reported assessment responses were received, with three-quarters of participants having graduated within the past 10 years. Topics in oral medicine and surgery attracted consistently high levels of interest. A tendency to favour topics with a perceived direct clinical application was observed. Topics recommended by the Dental Council as core areas for CPD were given a high level of priority by respondents. Conclusions: Traditional lectures remain a valued mode of CPD participation. Practical courses were valued across all dental topics offered. A varied approach to determining the requirements of dentists is essential to appropriately support the practitioner.

A study of primary teeth restored by intracoronal restorations in children participating in an undergraduate teaching programme at Cork University Dental School and Hospital, Ireland

Aim: To study the outcomes for restored primary molar teeth; to examine outcomes in relation to tooth type involved, intracoronal restoration complexity and to the material used. Materials and methods: Design: Retrospective study of primary molar teeth restored by intracoronal restorations. A series of restored primary molar teeth for children aged 6-12 years was studied. The principal outcome measure was failure of initial restoration (re-restoration or extraction). Three hundred patient records were studied to include three equal groups of primary molar teeth restored with amalgam, composite or glass ionomer, respectively. Restorative materials, the restoration type, simple (single surface) or complex (multi-surface) restoration, and tooth notation were recorded. Subsequent interventions were examined. Data were coded and entered into a Microsoft Excel database and analysis undertaken using SPSS v.18. Statistical differences were tested using the c2 test of statistical significance. Results: Of the 300 teeth studied, 61 restoration failures were recorded with 11 of those extracted. No significant differences were found between outcomes for upper first, upper second, lower first or lower second primary molars. Outcomes for simple primary teeth restored by intracoronal restorations were significantly better than those for complex intracoronal restorations (P = 0.042). Teeth originally restored with amalgam accounted for 19.7% of the 61 failures, composite for 29.5%, while teeth restored with glass ionomer represented 50.8% of all restoration failures. The differences were significant (P = 0.012). Conclusions: The majority (79.7%) of the 300 restored primary teeth studied were successful, and 3.7% teeth were extracted. Restorations involving more than one surface had almost twice the failure rate of single surface restorations. The difference was significant. Significant differences in failure rates for the three dental materials studied were recorded. Amalgam had the lowest failure rate while the failure rate with glass ionomer was the highest.

The geographies of encounter: investigating the spatiality and construction of 'meaningful' encounters with difference through the experiences of international students at University College Cork, Ireland

The purpose of this research is to investigate how international students negotiate encounters with Irish students and construct ‘meaning’ from those encounters in the spaces of the university and city. As cities are increasingly characterised by a multiplexity of diversity, the issue of living with difference is becoming more and more pertinent. In the wake of escalating socio-spatial polarisation, inter-cultural tension, racism, and xenophobia, the geographies of encounter seek to untangle the interactions that occur in the quotidian activities and spaces of everyday life to determine whether such encounters might reduce prejudice, antipathy and indifference and establish common social bonds (Amin 2002; Valentine 2008). Thus far, the literature has investigated a number of sites of encounter; public space, the home, neighbourhoods, schools, sports clubs, public transport, cafes and libraries (Wilson 2011; Schuermans 2013; Hemming 2011; Neal and Vincent 2011; Mayblin, Valentine and Anderrson 2015; Laurier and Philo 2006; Valentine and Sadgrove 2013; Harris, Valentine and Piekut 2014; Fincher and Iveson 2008). While these spaces produce a range of outcomes, the literature remains frustrated by a lack of clarity of what constitutes a ‘meaningful’ encounter and how such encounters might be planned for. Drawing on survey and interview data with full-time international students at University College Cork, Ireland, this study contributes to understanding how encounters are shaped by the construction and reproduction of particular identities in particular spaces, imbuing spaces with uneven power frameworks that produce diverse outcomes. Rather than identifying a singular ‘meaningful’ outcome of encounter as a potential panacea to the issues of exclusion and oppression, the contention here is to recognise a range of outcomes that are created by individuals in a range of ways. To define one outcome of encounter as ‘meaningful’ is to overlook the scale of intensity of diverse interactions and the multiplicity of ways in which people learn to live with difference.

County Cork: the experience of members of the establishment whose houses were burned in the IRA arson campaign, 1920-23

Between May 1920 and March 1923, there were seventy-three houses belonging to the County Cork establishment burnt down by IRA and anti-treaty forces. More houses were destroyed by this method in Cork than in any other Irish county in the same timeframe. The establishment were targeted by the IRA for their political, military and social persuasions that were essentially in opposition to the nationalist movement. The motivations behind these burnings is examined, the main reasons being reprisals for actions taken by Crown forces, military reasons, loyalty of house owners to the British government and agrarianism. The geographical distribution of these burnings is also provided to reveal how active individual IRA brigades were that operated within the county. Though there were few areas of the county left unaffected by the occurrence of arson attacks, there were higher concentrations of burnings in some areas. The house burnings in County Cork did not conform to the national pattern of house burnings and the reasons for this are explored. This study argues that the presence of Crown forces in Cork and their implementation of an official reprisal policy in January 1921 escalated military conflict, and arson attacks became a key tactic utilised by IRA forces in response to this policy. The aftermath of house burnings for members of the establishment is revealed through the various compensation committees that were formed after both the War of Independence and Civil War. Key sources for this study included personal papers of both the establishment and military figures, IRA witness statements, local and national newspapers, the 1901 and 1911 Irish Censuses, Colonial Office Papers, compensation claims filed with the British government and Irish Free State, and others from archives throughout Ireland and the United Kingdom.

Work, class and conflict: a comparative study of three Cork factories, incorporating oral testimony

This dissertation presents a comparative study of three factories in Cork Harbour area, Sunbeam Wolsey (1927-90), Irish Steel (1939-2001) and the Ford Marina Plant (1917-84). All three factories were significant industrial employers in both a domestic (Irish) and a local (Cork) context and are broadly representative of the Irish manufacturing industry that was developed under the policies of tariff protection introduced in the 1930s and gradually phased out between the late 1950s and the mid-1980s. Sunbeam Wolsey was a textile and clothing concern located on the north side of Cork City that possessed a borderline monopoly within its economic sector and was among the largest private employers of female labour in twentieth century Ireland. Irish Steel was the country’s only steel mill, located on Haulbowline island, a brief ferry-ride from the seaside town of Cobh, and was unusual in being one of the few manufacturing concerns operated as a nationalised industry under the auspices of the state. The Ford Marina plant predated the introduction of protectionism by more than a decade and began as the centre of the Ford empire’s tractor manufacturing business, before switching to the production of private motor vehicles for the Irish market in 1932. All three industries were closed or sold off when the state withdrew support, either in the form of tariff protection (Ford, Sunbeam) or direct funding (Irish Steel). While devoting much attention to the three firms, the central concern of this dissertation is not the companies themselves (though the economic history portion of the dissertation is substantial), but the workers they employed, examining the lives of these individuals both as members of the Irish working class, and, more specifically, as employees of the three factories under consideration. The project can be best described as a comparative factory study, comparing and contrasting the three workforces, focusing primarily on industrial relation and the experience of work. This dissertation utilises both documentary evidence and a significant quantity of oral testimony, breaking new ground by making the workplace the central focus of its investigation. The principal aims of the study are: 1. To document the lives of those who worked in these factories, capturing through oral testimony their subjective experiences of social class and factory life, as well as differences among narrators in terms of gender and status. In achieving this aim, the study will provide a broader social context for its detailed analysis of work and industrial relations in each firm. 2. To analyse the three workplaces and determine how and why each developed such distinct systems of industrial relations at the factory level, as well as to compare and contrast these systems. 3. To examine the nature of work in each factory and to determine how work and industrial relations in each firm developed over time, relating these changes both to internal and external factors. Additionally, the project will provide a comparative analysis of these changes.

Rural change south of the river Bride in counties Cork and Waterford: the surveyors' evidence 1716–1851

Estate studies in Irish historical geography have been often designed to confirm or contrast local trends of development with those previously identified at the regional or sub-regional level. To date, little attention has been awarded to estate maps in studies of rural landscape change. It is a theme of this paper that the results yielded from a careful study of such estate maps can throw light on the results of the activities of the majority of estate residents. In this regard, it is fortunate that at Lismore surveys of the estate in 1716–17 and 1773–4 have survived, and a nineteenth century dimension is added by an analysis of the Valuation Office maps for 1851. This work is focused on a study of critical indicators of change, notably leasing arrangements, farm size, rate and type of enclosure, infrastructural development and settlement growth. These changes are reviewed within the framework of the dialectic that developed between landlord or landlord-inspired management policies and the forces released locally by the vast bulk of the population. Broadly this analysis indicates some of the potential rewards which may be secured by detailed scrutiny of estate maps in conjunction with other estate records.

Silent screen: book review.

Book Review. Kevin Rockett, Irish film censorship: a cultural journey from silent cinema to internet pornography (Dublin, 2004) and Mary Corcoran and Mark O'Brien (eds), Political censorship and the democratic state: the Irish broadcasting ban (Dublin, 2005)

Does attendance affect grade? An analysis of first year economics students in Ireland

This paper examines the relationship between attendance and grade, controlling for other factors, in first year economics courses in University College Cork. Determinants of both class attendance and grade are specified and estimated. We find that attendance is low, at least by comparison with US evidence. Hours worked and travel time are among the factors affecting class attendance. Class attendance, and especially tutorial attendance has a positive and diminishing marginal effect on grade, while hours worked in a part-time job have a significant negative effect on grade.

A Viking Age maritime haven: a reassessment of the island settlement at Beginish, Co. Kerry

The results of O'Kelly’s excavations on Beginish Island are reassessed and it is proposed that there was a long-lived settlement there that functioned as a Viking-age maritime way-station. This re-evaluation is conducted in the light of recent scholarship on the nature of Scandinavian and Hiberno-Scandinavian settlement in Ireland and, in part, is based on the finds that have emerged on Beginish since the conclusion of the excavations there. The site is considered in the context of its location on the sea route that joined Hiberno-Scandinavian Cork with Limerick, and it is suggested that other such way-stations await.

Self-cutting and prospective repetition of self-harm: studies of emergency department presentations in Ireland

Background Self-harm places an individual at increased risk of future self-harm and suicide, and indicates distress and maladaptive coping. Those who present to hospital with self-cutting form a significant minority of self-harm patients who are at increased risk of prospective repetition of self-harm and suicide compared with those presenting with intentional overdose. In addition to increased risk, there is emerging evidence of demographic, psychological, clinical, and social differences between those presenting with self-cutting and those presenting with overdose. Aim and Key Objectives The aim of the current doctoral work was to examine in detail the association between presenting with self-cutting and risk of prospective repetition. The objectives were: to identify evidence-based risk factors for repetition of self-harm among those presenting to emergency departments with self-harm; to compare demographic and presentation characteristics and prospective repetition across presentations of self-cutting only, self-cutting plus intentional overdose, and intentional overdose only; to compare prospective repetition and other characteristics within self-cutting presentations based on the type of treatment received; to compare self-cutting and intentional overdose patients on psychological risk and protective factors for repetition; and to examine the lived experience of engaging in repeated overdose and self-cutting. Methods The current doctoral work used a mixed-methods approach and is comprised of one systematic review and four empirical studies. The empirical studies were two registry-based prospective studies of Irish hospital presentations of self-harm, one prospective structured interview study, and one qualitative study using Interpretative Phenomenological Analysis. Results The systematic review identified several consistent and emerging risk factors for repetition of self-harm, compared to which self-cutting had a medium-sized effect. The registry studies demonstrated that the involvement of self-cutting, particularly less medically severe selfcutting, confers an increased risk of 1-month and 12-month repetition among Irish index selfharm presentations. The structured psychological study detected higher hopelessness and lower non-reactivity to inner experience among those presenting with self-cutting, and higher depression among those who repeated self-harm. Repeaters had lower baseline levels of protective psychological factors than non-repeaters and continued to have higher depression and hopelessness at follow-up. Finally, the qualitative study indicated that self-harm is a purposeful action taken in response to an overwhelming situation and is evaluated afterwards in terms of personal and social effects. Chosen method of self-harm seemed to be influenced by the desired outcome of the self-harm act, capability, accessibility and previous experience. Conclusion Despite limitations in terms of recruitment rates, the work presented in this thesis is innovative in examining the issue of the association between self-cutting and repetition from multiple perspectives. No one factor can reliably predict all repetition but self-cutting represents one consistent and easily detected risk factor for repetition. Those who present with self-cutting exhibit significant differences on demographic, clinical, and psychological variables compared with those presenting with intentional overdose, and seem to exhibit a more vulnerable profile. However, those who present with self-cutting do not form a discrete or homogenous group, and self-harm methods and levels of suicidal intent are liable to fluctuate over time.