Applications of finite element computer modelling and thermal infrared remote sensing to the study of geothermal anomalies

Buried heat sources can be investigated by examining thermal infrared images and comparing these with the results of theoretical models which predict the thermal anomaly a given heat source may generate. Key factors influencing surface temperature include the geometry and temperature of the heat source, the surface meteorological environment, and the thermal conductivity and anisotropy of the rock. In general, a geothermal heat flux of greater than 2% of solar insolation is required to produce a detectable thermal anomaly in a thermal infrared image. A heat source of, for example, 2-300K greater than the average surface temperature must be a t depth shallower than 50m for the detection of the anomaly in a thermal infrared image, for typical terrestrial conditions. Atmospheric factors are of critical importance. While the mean atmospheric temperature has little significance, the convection is a dominant factor, and can act to swamp the thermal signature entirely. Given a steady state heat source that produces a detectable thermal anomaly, it is possible to loosely constrain the physical properties of the heat source and surrounding rock, using the surface thermal anomaly as a basis. The success of this technique is highly dependent on the degree to which the physical properties of the host rock are known. Important parameters include the surface thermal properties and thermal conductivity of the rock. Modelling of transient thermal situations was carried out, to assess the effect of time dependant thermal fluxes. One-dimensional finite element models can be readily and accurately applied to the investigation of diurnal heat flow, as with thermal inertia models. Diurnal thermal models of environments on Earth, the Moon and Mars were carried out using finite elements and found to be consistent with published measurements. The heat flow from an injection of hot lava into a near surface lava tube was considered. While this approach was useful for study, and long term monitoring in inhospitable areas, it was found to have little hazard warning utility, as the time taken for the thermal energy to propagate to the surface in dry rock (several months) in very long. The resolution of the thermal infrared imaging system is an important factor. Presently available satellite based systems such as Landsat (resolution of 120m) are inadequate for detailed study of geothermal anomalies. Airborne systems, such as TIMS (variable resolution of 3-6m) are much more useful for discriminating small buried heat sources. Planned improvements in the resolution of satellite based systems will broaden the potential for application of the techniques developed in this thesis. It is important to note, however, that adequate spatial resolution is a necessary but not sufficient condition for successful application of these techniques.

The development of a computer model to optimize the performance of a 50kWp photovoltaic system

A computer model has been developed to optimize the performance of a 50kWp photovoltaic system which supplies electrical energy to a dairy farm at Fota Island in Cork Harbour. Optimization of the system involves maximising the efficiency and increasing the performance and reliability of each hardware unit. The model accepts horizontal insolation, ambient temperature, wind speed, wind direction and load demand as inputs. An optimization program uses the computer model to simulate the optimum operating conditions. From this analysis, criteria are established which are used to improve the photovoltaic system operation. This thesis describes the model concepts, the model implementation and the model verification procedures used during development. It also describes the techniques which are used during system optimization. The software, which is written in FORTRAN, is structured in modular units to provide logical and efficient programming. These modular units may also be used in the modelling and optimization of other photovoltaic systems.

A post-structuralist analysis of Irish youth crime prevention policy with specific emphasis on the Garda youth diversion projects

Garda Youth Diversion Projects (GYDPs) have since their beginnings in the early 1990s gained an increasingly important role and now constitute a central feature of Irish youth justice provision. Managed by the Irish Youth Justice Service and implemented by the Gardai and a variety of youth work organisations as well as independent community organisations, GYDPs are located at the crossroads of welfarist and corporatist approaches to youth justice, combining diversionary and preventative aspects in their work. To date, these projects have been subjected to very little systematic analysis and they have thus largely escaped critical scrutiny. To address this gap, this thesis locates the analysis of GYDP policy and practice within a post-structuralist theoretical framework and deploys discourse analysis primarily based on the work of Michel Foucault. It makes visible the official youth crime prevention and GYDP policy discourses and identifies how official discourses relating to youth crime prevention, young people and their offending behaviour, are drawn upon, negotiated, rejected or re-contextualised by project workers and JLOs. It also lays bare how project workers and JLOs draw upon a variety of other discourses, resulting in multi-layered, complex and sometimes contradictory constructions of young people, their offending behaviour and corresponding interventions. At a time when the projects are undergoing significant changes in terms of their repositioning to operate as the support infrastructure underpinning the statutory Garda Youth Diversion Programme, the thesis traces the discursive shifts and the implications for practice that are occurring as the projects move away from a youth work orientation towards a youth justice orientation. A key contribution of this thesis is the insight it provides into how young people and their families are being constituted in individualising and sometimes pathologising ways in GYDP discourses and practices. It reveals the part played by the GYDP intervention in favouring individual and narrow familial causes of offending behaviour while broader societal contexts are sidelined. By explicating the very assumptions upon which contemporary youth crime prevention policy, as well as GYDP policy and practice are based, this thesis offers a counterpoint to the prevailing evidence-based agenda of much research in the field of Irish youth justice theory and youth studies more generally. Rather, it encourages the reader to take a step back and examine some of the most fundamental and unquestioned assumptions about the construction of young people, their offending behaviour and ways of addressing this, in contemporary Irish youth crime prevention policy and practice.

Prediction and prevention of venous thrombosis in pregnancy

Venous thromboembolism (VTE) remains the leading cause of maternal mortality. Reports identified further research is required in obese and women post caesarean section (CS). Risk factors for VTE during pregnancy are periodically absent indicating the need for a simple and effective screening tool for pregnancy. Perturbation of the uteroplacental haemostasis has been implicated in placenta mediated pregnancy complications. This thesis had 4 main aims: 1) To investigate anticoagulant effects following a fixed thromboprophylaxis dose in healthy women post elective CS. 2) To evaluate the calibrated automated thrombogram (CAT) assay as a potential predictive tool for thrombosis in pregnancy. 3) To compare the anticoagulant effects of fixed versus weight adjusted thromboprophylaxis dose in morbidly obese pregnant women. 4) To investigate the LMWH effects on human haemostatic gene and antigen expression in placentae and plasma from the uteroplacental , maternal and fetal circulation. Tissue factor pathway inhibitor (TFPI), thrombin antithrombin (TAT), CAT and anti-Xa levels were analysed. Real-time PCR and ELISA were used to quantify mRNA and protein expression of TFPI and TF in placental tissue. In women post CS, anti-Xa levels do not reflect the full anticoagulant effects of LMWH. LMWH thromboprophylaxis in this healthy cohort of patients appears to have a sustained effect in reducing excess thrombin production post elective CS. The results of this study suggest that predicting VTE in pregnant women using CAT assay is not possible at present time. The prothrombotic state in pregnant morbidly obese women was substantially attenuated by weight adjusted but not at fixed LMWH doses. LMWH may be effective in reducing in- vivo thrombin production in the uteroplacental circulation of thrombophilic women. All these results collectively suggest that at appropriate dosage, LMWH is effective in attenuating excess thrombin generation, in low risk pregnant women post caesarean section or moderate to high risk pregnant women who are morbidly obese or tested positive for thrombophilia. The results of the studies provided data to inform evidence-based practice to improve the outcome for pregnant women at risk of thrombosis.

Assessing the impulse control of violent offenders using computer-based cognitive performance tasks

The topic of this thesis is impulsivity. The meaning and measurement of impulse control is explored, with a particular focus on forensic settings. Impulsivity is central to many areas of psychology; it is one of the most common diagnostic criteria of mental disorders and is fundamental to the understanding of forensic personalities. Despite this widespread importance there is little agreement as to the definition or structure of impulsivity, and its measurement is fraught with difficulty owing to a reliance on self-report methods. This research aims to address this problem by investigating the viability of using simple computerised cognitive performance tasks as complementary components of a multi-method assessment strategy for impulse control. Ultimately, the usefulness of this measurement strategy for a forensic sample is assessed. Impulsivity is found to be a multifaceted construct comprised of a constellation of distinct sub-dimensions. Computerised cognitive performance tasks are valid and reliable measures that can assess impulsivity at a neuronal level. Self-report and performance task methods assess distinct components of impulse control and, for the optimal assessment of impulse control, a multi-method battery of self-report and performance task measures is advocated. Such a battery is shown to have demonstrated utility in a forensic sample, and recommendations for forensic assessment in the Irish context are discussed.

The application of computer modelling to develop a methodology for ‘existing building’ upgrades to move towards carbon-neutral buildings

The retrofitting of existing buildings for decreased energy usage, through increased energy efficiency and for minimum carbon dioxide emissions throughout their remaining lifetime is a major area of research. This research area requires development to provide building professionals with more efficient building retrofit solution determination tools. The overarching objective of this research is to develop a tool for this purpose through the implementation of a prescribed methodology. This has been achieved in three distinct steps. Firstly, the concept of using the degree-days modelling method as an adequate means of basing retrofit decision upon was analysed and the results illustrated that the concept had merit. Secondly, the concept of combining the degree-days modelling method and the Genetic Algorithms optimisation method is investigated as a method of determining optimal thermal energy retrofit solutions. Thirdly, the combination of the degree-days modelling method and the Genetic Algorithms optimisation method were packaged into a building retrofit decision-support tool and named BRaSS (Building Retrofit Support Software). The results demonstrate clearly that, fundamental building information, simplified occupancy profiles and weather data used in a static simulation modelling method is a sufficient and adequate means to base retrofitting decisions upon. The results also show that basing retrofit decisions upon energy analysis results are the best means to guide a retrofit project and also to achieve results which are optimum for a particular building. The results also indicate that the building retrofit decision-support tool, BRaSS, is an effective method to determine optimum thermal energy retrofit solutions.

Biased group decision-making and the effect of computer-mediated communication: separating the effects of anonymity, voting and blind picking

The influence of communication technology on group decision-making has been examined in many studies. But the findings are inconsistent. Some studies showed a positive effect on decision quality, other studies have shown that communication technology makes the decision even worse. One possible explanation for these different findings could be the use of different Group Decision Support Systems (GDSS) in these studies, with some GDSS better fitting to the given task than others and with different sets of functions. This paper outlines an approach with an information system solely designed to examine the effect of (1) anonymity, (2) voting and (3) blind picking on decision quality, discussion quality and perceived quality of information.