Edmund Burke and the heritage of oral culture

The dissertation proposes that one of the more fruitful ways of interpreting Burke's work is to evaluate him as an oral performer rather than a literary practitioner and it argues that in his voice can be heard the modulations of the genres and conventions of oral composition of eighteenth-century Gaelic Ireland. The first chapter situates Burke in the milieu of the Gaelic landed class of eighteenth-century Ireland. The next chapter examines how the rich oral culture of the Munster Gaelic gentry, where Burke spent his childhood days, was to provide a lasting influence on the form and content of Burke's work. His speeches on the British constitution are read in the context of the historical and literary culture of the Jacobites, specifically the speculum principis, Párliament na mBán. The third chapter surveys the tradition of Anglo-Irish theoretical writings on oratory and discusses how Burke is aligned with this school. The focus is on how Burke's thought and practice, his 'idioms', might be understood as being mediated through the criterion of orality rather than literature. The remaining chapters discuss Burke's politics and performance in the light of Gaelic cultural practices such as the rituals of the courts of poetry, the Warrant Poems or Barántas; the performance of funeral laments and elegies, Caoineadh, the laments for the fallen nobility, Marbhna na daoine uaisle, the satires and the political vision allegories of Munster, Aislingí na Mumhan; to show how they provide us with a remarkable context for discussing Burke's poetical-political performance. In hearing Burke's voice through the body of Gaelic culture our understanding of Burke's position in the wider world of the eighteenth century (and hence his meaning) is profoundly affected.

The effect of variability in the powder/liquid ratio on the strength of zinc phosphate cement

Aim: To investigate (a) variability in powder/liquid proportioning (b) effect of the extremes of any such variability on diametral tensile strength (DTS), in a commercial zinc phosphate cement. Statistical analyses (a = 0.05) were by Student's t-test in the case of powder/liquid ratio and one-way ANOVA and Tukey HSD for for pair-wise comparisons of mean DTS. The Null hypotheses were that (a) the powder-liquid mixing ratios observed would not differ from the manufacturer's recommended ratio (b) DTS of the set cement samples using the extreme powder/liquid ratios observed would not differ from those made using the manufacturer's recommended ratio. Methodology: Thirty-four undergraduate dental students dispensed the components according to the manufacturer's instructions. The maximum and minimum powder/liquid ratios (m/m), together with the manufacturer's recommended ratio (m/m), were used to prepare cylindrical samples (n = 3 x 34) for DTS testing. Results: Powder/liquid ratios ranged from 2.386 to 1.018.The mean ratio (1.644 (341) m/m) was not significantly different from the manufacturer's recommended value of 1.718 (p=0.189). DTS values for the maximum and minimum ratios (m/m), respectively, were both significantly different from each other (p<0.001) and from the mean value obtained from the manufacturer's recommended ratio (m/m) (p<0.001). Conclusions: Variability exists in powder/liquid ratio (m/m) for hand dispensed zinc phosphate cement. This variability can affect the DTS of the set material.

Involvement of incipient hydrous oxide species in electrocatalysis at some metal electrode surfaces

In this thesis a novel theory of electrocatalysis at metal (especially noble metal)/solution interfaces was developed based on the assumption of metal adatom/incipient hydrous oxide cyclic redox transitions. Adatoms are considered as metastable, low coverage species that oxidise in-situ at potentials of often significantly cathodic to the regular metal/metal oxide transition. Because the adatom coverage is so low the electrochemical or spectroscopic response for oxidation is frequently overlooked; however, the product of such oxidation, referred to here as incipient hydrous oxide seems to be the important mediator in a wide variety of electrocatalytically demanding oxidation processes. Conversely, electrocatalytically demanding reductions apparently occur only at adatom sites at the metal/solution interface - such reactions generally occur only at potentials below, i.e. more cathodic than, the adatom/hydrous oxide transition. It was established that while silver in base oxidises in a regular manner (forming initially OHads species) at potentials above 1.0 V (RHE), there is a minor redox transition at much lower potentials, ca. o.35 v (RHE). The latter process is assumed to an adatom/hydrous oxide transition and the low coverage Ag(l) hydrous oxide (or hydroxide) species was shown to trigger or mediate the oxidation of aldehydes, e. g. HCHO. The results of a study of this system were shown to be in good agreement with a kinetic model based on the above assumptions; the similarity between this type of behaviour and enzyme-catalysed processes - both systems involve interfacial active sites - was pointed out. Similar behaviour was established for gold where both Au(l) and Au(lll) hydrous oxide mediators were shown to be the effective oxidants for different organic species. One of the most active electrocatalytic materials known at the present time is platinum. While the classical view of this high activity is based on the concept of activated chemisorption (and the important role of the latter is not discounted here) a vital role is attributed to the adatom/hydrous oxide transition. It was suggested that the well known intermediate (or anomalous) peak in the hydrogen region of the cyclic voltanmogram for platinum region is in fact due to an adatom/hydrous oxide transition. Using potential stepping procedures to minimise the effect of deactivating (COads) species, it was shown that the onset (anodic sweep) and termination (cathodic sweep) potential for the oxidation of a wide variety of organics coincided with the potential for the intermediate peak. The converse was also shown to apply; sluggish reduction reactions, that involve interaction with metal adatoms, occur at significant rates only in the region below the hydrous oxide/adatom transition.

A study of the oxygen electrochemistry of ruthenium and iridium

This thesis is concerned with an investigation of the anodic behaviour of ruthenium and iridium in aqueous solution and particularly of oxygen evolution on these metals. The latter process is of major interest in the large-scale production of hydrogen gas by the electrolysis of water. The presence of low levels of ruthenium trichloride ca. 10-4 mol dm-3 in acid solution give a considerable increase in the rate of oxygen evolution from platinum and gold, but not graphite, anodes. The mechanism of this catalytic effect was investigated using potential step and a.c. impedance technique. Earlier suggestions that the effect is due to catalysis by metal ions in solution were proved to be incorrect and it was shown that ruthenium species were incorporated into the surface oxide film. Changes in the oxidation state of these ruthenium species is probably responsible for the lowering of the oxygen overvoltage. Both the theoretical and practical aspects of the reaction were complicated by the fact that at constant potential the rates of both the catalysed and the uncatalysed oxygen evolution processes exhibit an appreciable, continuous decrease with either time or degree of oxidation of the substrate. The anodic behaviour of iridium in the oxide layer region has been investigated using conventional electrochemical techniques such as cyclic voltammetry. Applying a triangular voltage sweep at 10 Hz, 0.01 to 1.50V increases the amount of electric charge which the surface can store in the oxide region. This activation effect and the mechanism of charge storage is discussed in terms of both an expanded lattice theory for oxide growth on noble metals and a more recent theory of irreversible oxide formation with subsequent stoichiometry changes. The lack of hysteresis between the anodic and cathodic peaks at ca. 0.9 V suggests that the process involved here is proton migration in a relatively thick surface layer, i.e. that the reaction involved is some type of oxide-hydroxide transition. Lack of chloride ion inhibition in the anodic region also supports the irreversible oxide formation theory; however, to account for the hydrogen region of the potential sweep a compromise theory involving partial reduction of the outer regions of iridium oxide film is proposed. The loss of charge storage capacity when the activated iridium surface is anodized for a short time above ca. 1.60 V is attributed to loss by corrosion of the outer active layer from the metal surface. The behaviour of iridium at higher anodic potentials in acid solution was investigated. Current-time curves at constant potential and Tafel plots suggested that a change in the mechanism of the oxygen evolution reaction occurs at ca. 1.8 V. Above this potential, corrosion of the metal occurred, giving rise to an absorbance in the visible spectrum of the electrolyte (λ max = 455 nm). It is suggested that the species involved was Ir(O2)2+. A similar investigation in the case of alkaline electrolyte gave no evidence for a change in mechanism at 1.8 V and corrosion of the iridium was not observed. Oxygen evolution overpotentials were much lower for iridium than for platinum in both acidic and alkaline solutions.

Development of CMOS-compatible electrostatic supercapacitors

This work focuses on development of electrostatic supercapacitors (ESCs) using process routes compatible with complementary metal–oxide–semiconductor (CMOS) fabrication. Wafer-scale anodised aluminium oxide (AAO) processing techniques have been developed to produce high-surface area templates. Statistically optimised atomic layer deposition (ALD) processes have been developed to conformally coat the templates and generate metalinsulator-metal capacitor structures. Detailed electrical characterisation and analysis for a range of devices, revealed ESC’s with high capacitance densities of ~12 μF cm-2 and equivalent energy densities of 0.28 Wh/kg . Finally the suitability of ESC’s toward next generation energy storage applications is discussed.

ENVIRON 2011: 21st Irish Environmental Researchers Colloquium

The theme of this year’s colloquium is “Towards 2020: Environmental challenges and opportunities for the next decade” which reflects the many environmental targets that have been set for the year 2020 in areas of climate change, renewable energy, water protection and biodiversity. In relation to the latter, we are delighted to have Professor Michael Depledge (Former Chairman of UK Science Advisory Committee on the Environment & Climate Change) at ENVIRON 2011 to deliver the colloquium keynote address on “Health and the Value of Nature”. The colloquium plenary session has a number of high profile speakers who will address the colloquium theme of environmental challenges and opportunities for the next decade including Professor John Sweeney (NUI Maynooth), Ms Laura Burke (Director of EPA’s Office of Climate, Licensing Research and Resource Use) and Mr John Mullins (CEO of Bord Gais). The research programme has 95 oral presentations and 60 poster presentations in the themes of water quality, energy and climate change, marine and coastal research, environmental management, environmental technologies, environment and health, and biodiversity and ecosystems. In addition, for the first year, poster presenters have the opportunity to make a 1 minute oral presentation on their poster during the oral sessions in the relevant theme. The 2011 colloquium also sees an increase the number of workshops and seminars accompanying the programme with an emphasis on training and development for postgraduates in the environmental area. We are particularly pleased to have a link with the Environment Graduate Programme in the “Ocean Studies Workshop” which illustrates how the ENVIRON colloquium can support and benefit from the various graduate programmes currently being developed within Universities. Finally ENVIRON 2011 and the UCC 2011 Law and the Environment symposium have been deliberately scheduled together at the same time and location to allow delegates from both conferences to benefit from each other’s programmes.