Precision biomechanical motion tracking and throw characterisation in professional darts

In professional sports there are in general three steps required to improve performance namely task definition, training and performance assessment. This process is iteratively repeated and feedback generated from quantitative performance measurement is in turn used for task redefinition. Task definition can be achieved in a number of ways including via video streaming or indeed and as is more common, by listening to coaching staff. However non-subjective performance evaluation is difficult due to the complexity of the movements involved. When considering the subset of sports where precision accuracy and repeatability are a necessity this problem becomes inherently more difficult to solve. Until recently sports such as martial arts, fencing and darts, where the smallest deviation from a prescribed movement goal can result in large outcome error, were deemed too difficult to characterise fully. Advances in technology, as illustrated by this study, now make this type of physiometry possible.

A preliminary study on how fatigue affects scoring average in professional darts

The purpose of this preliminary study is to identify signs of fatigue in specific muscle groups that in turn directly influence accuracy in professional darts. Electromyography (EMG) sensors are employed to monitor the electrical activity produced by skeletal muscles of the trunk and upper limb during throw. It is noted that the Flexor Pollicis Brevis muscle which controls the critical release action during throw shows signs of fatigue. This is accompanied by an inherent increase in mean integral EMG amplitude for a number of other throw related muscles indicating an attempt to maintain constant applied throwing force. A strong correlation is shown to exist between average score and decrease in mean integral ECG amplitude for the Flexor Pollicis Brevis.

Hearing family carers: report on research undertaken with family carers in Cork

This report details the findings of research undertaken with family carers in Cork during 2007 – 2008. The research was undertaken to elicit the views and experiences of family carers, and in so doing, to gain insight into their perspectives on family caring and on associated support mechanisms. It is hoped that, thereafter, policy can draw on these observations. Three key themes emerged from the research itself. These are (i) the role and position of the family carer in society, (ii) the process of family caring itself and (iii) access to and knowledge of key support services. This report, then, draws attention to the extent and dynamics of family caring, as seen through the opinions and experiences of carers located in and nearby Cork city. It has the following format. In the first instance we turn our attention to a discussion of family caring in Ireland, and associated supports more generally. This includes a discussion on key issues arising in the general discourse around family caring in Ireland and internationally, in order to provide a context from which to locate the experiences of carers involved in this research study. Thereafter, we detail the methodology employed in this research study, which followed a method of research enquiry that values the input of participants from the early stages of research focus and design, and which incorporates qualitative and quantitative methods of enquiry. The research was conceptualised and developed in conjunction with The Carers Association, Cork in keeping with an approach to social research that attempts to link academic and activist/advocacy interests. Its aims were to identify issues that family carers in the locality considered important, with a view to contributing to local knowledge, providing a forum for ongoing research, and to informing policy developments on carers. The focus of the report then turns to profiling carers who participated in the research, examining the care they provide, and discussing support they receive from family, friends and neighbours – from informal sources. We then look to the access carers have to formal and public, community-based support services. We examine their experiences of, and concerns with regard to some of these key services, and look at ways that such issues might be addressed. The next section concentrates on financial supports, a range of which are available to carers, for instance, to supplement income and to assist with home renovations. We look at their uptake and issues arising, again with a view to understanding and addressing them from the perspectives of the service users. Finally, the report turns its attention to aspirations that carers have for themselves; in terms of their own personal, training, and employment options. The report concludes by drawing attention to key issues discussed throughout and makes a number of key recommendations, aimed at addressing the voiced opinions and experiences of carers that have emerged through the research.

'La Violence et la mauvaise foi': Context and rhetoric in Pierre Bayle's Ce que c'est que la France toute Catholique

My thesis presents an examination of Ce que c'est que la France toute Catholique (1686) by Pierre Bayle, a prominent figure in the Republic of Letters and the Huguenot Refuge in the seventeenth century. This pamphlet was the first occasional text that Bayle published following the Revocation of the Edict of Nantes in which the religious toleration afforded to the Huguenot minority in France was repealed, a pivotal moment in the history of early modern France. In my thesis, I analyse the specific context within which Bayle wrote this pamphlet as a means of addressing a number of issues, including the legitimacy of forced conversions, the impact of the religious controversy upon exchanges in the Republic of Letters, the nature of religious zeal and finally the alliance of Church and state discourses in the early modern period. An examination of this context provides a basis from which to re-interpret the rhetorical strategies at work within the pamphlet, and also to come to an increased understanding of how, why and to what end he wrote it. In turn this allowed me to examine the relationship between this often overlooked pamphlet and the more extensively studied Commentaire Philosophique, in which Bayle argued in favour of religious toleration. Ultimately, understanding the relationship between these two texts proves essential in order to characterise his response to the Revocation of the Edict of Nantes and to understand the place of the pamphlet within his oeuvre. Furthermore, an analysis of the pamphlet and the Commentaire Philosophique provide a lens through which to elucidate both Bayle's intellectual development at this early stage in his career, and also the wider context of the rise of toleration theory and the evolution of modes of civility within the Republic of Letters on the eve of the Enlightenment.

Ironworking in late medieval Ireland, c. AD. 1200 to 1600

The landscape of late medieval Ireland, like most places in Europe, was characterized by intensified agricultural exploitation, the growth and founding of towns and cities and the construction of large stone edifices, such as castles and monasteries. None of these could have taken place without iron. Axes were needed for clearing woodland, ploughs for turning the soil, saws for wooden buildings and hammers and chisels for the stone ones, all of which could not realistically have been made from any other material. The many battles, waged with ever increasingly sophisticated weaponry, needed a steady supply of iron and steel. During the same period, the European iron industry itself underwent its most fundamental transformation since its inception; at the beginning of the period it was almost exclusively based on small furnaces producing solid blooms and by the turn of the seventeenth century it was largely based on liquid-iron production in blast-furnaces the size of a house. One of the great advantages of studying the archaeology of ironworking is that its main residue, slag, is often produced in copious amounts both during smelting and smithing, is virtually indestructible and has very little secondary use. This means that most sites where ironworking was carried out are readily recognizable as such by the occurrence of this slag. Moreover, visual examination can distinguish between various types of slag, which are often characteristic for the activity from which they derive. The ubiquity of ironworking in the period under study further means that we have large amounts of residues available for study, allowing us to distinguish patterns both inside assemblages and between sites. Disadvantages of the nature of the remains related to ironworking include the poor preservation of the installations used, especially the furnaces, which were often built out of clay and located above ground. Added to this are the many parameters contributing to the formation of the above-mentioned slag, making its composition difficult to connect to a certain technology or activity. Ironworking technology in late medieval Ireland has thus far not been studied in detail. Much of the archaeological literature on the subject is still tainted by the erroneous attribution of the main type of slag, bun-shaped cakes, to smelting activities. The large-scale infrastructure works of the first decade of the twenty-first century have led to an exponential increase in the amount of sites available for study. At the same time, much of the material related to metalworking recovered during these boom-years was subjected to specialist analysis. This has led to a near-complete overhaul of our knowledge of early ironworking in Ireland. Although many of these new insights are quickly seeping into the general literature, no concise overviews on the current understanding of the early Irish ironworking technology have been published to date. The above then presented a unique opportunity to apply these new insights to the extensive body of archaeological data we now possess. The resulting archaeological information was supplemented with, and compared to, that contained in the historical sources relating to Ireland for the same period. This added insights into aspects of the industry often difficult to grasp solely through the archaeological sources, such as the people involved and the trade in iron. Additionally, overviews on several other topics, such as a new distribution map of Irish iron ores and a first analysis of the information on iron smelting and smithing in late medieval western Europe, were compiled to allow this new knowledge on late medieval Irish ironworking to be put into a wider context. Contrary to current views, it appears that it is not smelting technology which differentiates Irish ironworking from the rest of Europe in the late medieval period, but its smithing technology and organisation. The Irish iron-smelting furnaces are generally of the slag-tapping variety, like their other European counterparts. Smithing, on the other hand, is carried out at ground-level until at least the sixteenth century in Ireland, whereas waist-level hearths become the norm further afield from the fourteenth century onwards. Ceramic tuyeres continue to be used as bellows protectors, whereas these are unknown elsewhere on the continent. Moreover, the lack of market centres at different times in late medieval Ireland, led to the appearance of isolated rural forges, a type of site unencountered in other European countries during that period. When these market centres are present, they appear to be the settings where bloom smithing is carried out. In summary, the research below not only offered us the opportunity to give late medieval ironworking the place it deserves in the broader knowledge of Ireland's past, but it also provided both a base for future research within the discipline, as well as a research model applicable to different time periods, geographical areas and, perhaps, different industries..

Synthesis and characterisation of novel superficially porous silica based stationary phases for use in liquid chromatography

The concept of pellicular particles was suggested by Horváth and Lipsky over fifty years ago. The reasoning behind the idea of these particles was to improve column efficiency by shortening the pathways analyte molecules can travel, therefore reducing the effect of the A and C terms. Several types of shell particles were successfully marketed around this time, however with the introduction of high quality fully porous silica under 10 μm, shell particles faded into the background. In recent years a new generation of core shell particles have become popular within the separation science community. These particles allow fast and efficient separations that can be carried out on conventional HPLC systems. Chapter 1 of this thesis introduces the chemistry of chromatographic stationary phases, with an emphasis on silica bonded phases, particularly focusing on the current state of technology in this area. The main focus is on superficially porous silica particles as a support material for liquid chromatography. A summary of the history and development of these particles over the past few decades is explored, along with current methods of synthesis of shell particles. While commercial shell particles have a rough outer surface, Chapter 2 focuses on the novel approach to growth of smooth surface superficially porous particles in a step-by-step manner. From the Stöber methodology to the seeded growth technique, and finally to the layer-bylayer growth of the porous shell. The superficially porous particles generated in this work have an overall diameter of 2.6 μm with a 350 nm porous shell; these silica particles were characterised using SEM, TEM and BET analysis. The uniform spherical nature of the particles along with their surface area, pore size and particle size distribution are examined in this chapter. I discovered that these smooth surface shell particles can be synthesised to give comparable surface area and pore size in comparison to commercial brands. Chapter 3 deals with the bonding of the particles prepared in Chapter 2 with C18 functionality; one with a narrow and one with a wide particle size distribution. This chapter examines the chromatographic and kinetic performance of these silica stationary phases, and compares them to a commercial superficially porous silica phase with a rough outer surface. I found that the particle size distribution does not seem to be the major contributor to the improvement in efficiency. The surface morphology of the particles appears to play an important role in the packing process of these particles and influences the Van Deemter effects. Chapter 4 focuses on the functionalisation of 2.6 μm smooth surface superficially porous particles with a variety of fluorinated and phenyl silanes. The same processes were carried out on 3.0 μm fully porous silica particles to provide a comparison. All phases were accessed using elemental analysis, thermogravimetric analysis, nitrogen sorption analysis and chromatographically evaluated using the Neue test. I observed comparable results for the 2.6 μm shell pentaflurophenyl propyl silica when compared to 3.0 μm fully porous silica. Chapter 5 moves towards nano-particles, with the synthesis of sub-1 μm superficially porous particles, their characterisation and use in chromatography. The particles prepared are 750 nm in total with a 100 nm shell. All reactions and testing carried out on these 750 nm core shell particles are also carried out on 1.5 μm fully porous particles in order to give a comparative result. The 750 nm core shell particles can be synthesised quickly and are very uniform. The main drawback in their use for HPLC is the system itself due to the backpressure experienced using sub – 1 μm particles. The synthesis of modified Stöber particles is also examined in this chapter with a range of non-porous silica and shell silica from 70 nm – 750 nm being tested for use on a Langmuir – Blodgett system. These smooth surface shell particles have only been in existence since 2009. The results displayed in this thesis demonstrate how much potential smooth surface shell particles have provided more in-depth optimisation is carried out. The results on packing studies reported in this thesis aims to be a starting point for a more sophisticated methodology, which in turn can lead to greater chromatographic improvements.

Investigations into the cellular and molecular changes in the amygdala in models of temporal lobe epilepsy and maternal immune activation

The amygdala is a limbic structure that is involved in many of our emotions and processing of these emotions such as fear, anger and pleasure. Conditions such as anxiety, autism, and also epilepsy, have been linked to abnormal functioning of the amygdala, owing to improper neurodevelopment or damage. This thesis investigated the cellular and molecular changes in the amygdala in models of temporal lobe epilepsy (TLE) and maternal immune activation (MIA). The kainic acid (KA) model of temporal lobe epilepsy (TLE) was used to induce Ammon’s-horn sclerosis (AHS) and to investigate behavioural and cytoarchitectural changes that occur in the amygdala related to Neuropeptide Y1 receptor expression. Results showed that KA-injected animals showed increased anxiety-like behaviours and displayed histopathological hallmarks of AHS including CA1 ablation, granule cell dispersion, volume reduction and astrogliosis. Amygdalar volume and neuronal loss was observed in the ipsilateral nuclei which was accompanied by astrogliosis. In addition, a decrease in Y1 receptor expressing cells in the ipsilateral CA1 and CA3 sectors of the hippocampus, ipsi- and contralateral granule cell layer of the dentate gyrus and ipsilateral central nucleus of the amygdala was found, consistent with a reduction in Y1 receptor protein levels. The results suggest that plastic changes in hippocampal and/or amygdalar Y1 receptor expression may negatively impact anxiety levels. Gamma-aminobutyric acid (GABA) is the main inhibitory neurotransmitter in the brain and tight regulation and appropriate control of GABA is vital for neurochemical homeostasis. GABA transporter-1 (GAT-1) is abundantly expressed by neurones and astrocytes and plays a key role in GABA reuptake and regulation. Imbalance in GABA homeostasis has been implicated in epilepsy with GAT-1 being an attractive pharmacological target. Electron microscopy was used to examine the distribution, expression and morphology of GAT-1 expressing structures in the amygdala of the TLE model. Results suggest that GAT-1 was preferentially expressed on putative axon terminals over astrocytic processes in this TLE model. Myelin integrity was examined and results suggested that in the TLE model myelinated fibres were damaged in comparison to controls. Synaptic morphology was studied and results suggested that asymmetric (excitatory) synapses occurred more frequently than symmetric (inhibitory) synapses in the TLE model in comparison to controls. This study illustrated that the amygdala undergoes ultrastructural alterations in this TLE model. Maternal immune activation (MIA) is a risk factor for neurodevelopmental disorders such as autism, schizophrenia and also epilepsy. MIA was induced at a critical window of amygdalar development at E12 using bacterial mimetic lipopolysaccharide (LPS). Results showed that MIA activates cytokine, toll-like receptor and chemokine expression in the fetal brain that is prolonged in the postnatal amygdala. Inflammation elicited by MIA may prime the fetal brain for alterations seen in the glial environment and this in turn have deleterious effects on neuronal populations as seen in the amygdala at P14. These findings may suggest that MIA induced during amygdalar development may predispose offspring to amygdalar related disorders such as heightened anxiety, fear impairment and also neurodevelopmental disorders.

The ‘Celtic’ dimension of pre-first World War religious discourse in Britain: Wellesley Tudor Pole and the Glastonbury phenomenon

This article will explore the contribution made to the construction of discourse around religion outside of mainstream Christianity, at the turn of the twentieth century in Britain, by a Celticist movement as represented by Wellesley Tudor Pole (d.1968) and his connection to the Glastonbury phenomenon. I will detail the interconnectedness of individuals and movements occupying this discursive space and their interest in efforts to verify the authenticity of an artefact which Tudor Pole claimed was once in the possession of Jesus. Engagement with Tudor Pole’s quest to prove the provenance of the artefact, and his contention that a pre-Christian culture had existed in Ireland which had extended itself to Glastonbury and Iona creating the foundation for an authentic Western mystical tradition, is presented as one facet of a broader, contemporary discourse on alternative ideas and philosophies. In conclusion, I will juxtapose Tudor Pole’s fascination with Celtic origins and the approach of leading figures in the ‘Celtic Revival’ in Ireland, suggesting intersections and alterity in the construction of their worldview. The paper forms part of a chapter in a thesis under-preparation which examines the construction of discourse on religion outside of mainstream Christianity at the turn of the twentieth century, and in particular the role played by visiting religious reformers from Asia. The aim is to recover the (mostly forgotten) history of these engagements.

Career choice in medicine

Background: Career Choice in Medicine is an important and problematic topic. Medical education has been framed as professional identity development, yet career choice has not been viewed as a matter of identity. My primary aim was to offer new insights by exploring career choice using Figured Worlds theory, a socio-cultural theory of identity. Graduate retention is a challenge for many countries, including Ireland. My secondary aim was to address a gap in the data on postgraduate trainees in Ireland and to use the Irish case to illustrate points transferable to other contexts. Methodology & Methods: This was a predominantly qualitative Mixed Methods programme of research. My qualitative studies were oriented towards social constructionism. I collated existing data from the Royal College of Physicians of Ireland (RCPI) and HSE-MET to describe trainees and their career paths. I surveyed Basic Specialist Training trainees (n=333) about their career plans. I surveyed new trainees (n=527) about their expectations of training and all RCPI trainees about their experiences of training (n=1246). I conducted semi-structured interviews with 18 medical students and doctors. A subgroup (n=6) provided longitudinal data. Figured Worlds theory and Gee’s discourse tools were used for analysis. Results: I have used the case of medical training and career choice in Ireland to explain how social, political and cultural context, and day to day experiences in the cultural world of medicine, shaped doctors’ career choices. My qualitative findings described a unifying model of career choice, consisting of priming, exposure, positioning and open-endedness, which can guide the design of interventions to shape and support career choice. Conclusion: My original contribution has been to demonstrate the fruitfulness of framing career choice in terms of identity development. This represents a turn in the conversation about career choice, which brings new starting points and moves the dialogue forward.

From the demise of theory to its resurgence. A retrospective on the postmodern turn to rethink the 'desire for narrative' and the sublime untimeliness of emancipation

Cultural Marxist Theory, commonly known as theory, enjoyed a moment of extraordinary success in the 1970s, when the works of leading post-war French philosophers were published in English. After relocating to Anglophone academia, however, theory disavowed its original concerns and lost its ambition to understand the world as a whole, becoming the play of heterogeneities associated with postcolonialism, multiculturalism and identity politics, commonly referred to as postmodern theory. This turn, which took place during a period that seemed to have spelt the death of Marxism, the 1990s, induced many of its supporters to engage in an ongoing funeral wake designating the merits of theory and dreaming its resurgence. According to them, had theory been resurrected in historical circumstances completely different from those which had led to its rise, it would have never reacquired the significance that had originally connoted it. This thesis demonstrates how theory has survived its demise and entirely regained its prominence in our socio-political context marked by the effects of the latest crisis of capitalism and by the global threat of terrorisms rooted in messianic eschatologies. In its current form theory does no longer need to show allegiance to certain intellectual stances or political groupings in order to produce important reformulations of the projects it once gave life to. Though less overtly radical and epistemologically bounded, theory remains a necessary form of enquiry justified by the political commitment which originated it in the first place. Its voice continues to speak to us about justice ‘where it is not yet, not yet there, where it is no longer’ (Derrida, 1993, XVIII).