The formulation, testing and stability of 16% fat cream liqueurs

Cream liqueurs manufactured by a one-step process, where alcohol was added before homogenisation, were more stable than those processed by a two -step process which involved addition of alcohol after homogenisation. Using the one-step process, it was possible to produce creaming-stable liqueurs by using one pass through a homogeniser (27.6 MPa) equipped with "liquid whirl" valves. Test procedures to characterise cream liqueurs and to predict shelf life were studied in detail. A turbidity test proved simple, rapid and sensitive for characterising particle size and homogenisation efficiency. Prediction of age thickening/gelation in cream liqueurs during incubation at 45 °C depended on the age of the sample when incubated. Samples that gelled at 45 °C may not do so at ambient temperature. Commercial cream liqueurs were similar in gross chemical composition, and unlike experimentally produced liqueurs, these did not exhibit either age-gelation at ambient or elevated temperatures. Solutions of commercial sodium caseinates from different sources varied in their calcium sensitivity. When incorporated into cream liqueurs, caseinates influenced the rate of viscosity increase, coalescence and, possibly, gelation during incubated storage. Mild heat and alcohol treatment modified the properties of caseinate used to stabilise non-alcoholic emulsions, while the presence of alcohol in emulsions was important in preventing clustering of globules. The response to added trisodium citrate varied. In many cases, addition of the recommended level (0.18%) did not prevent gelation. Addition of small amounts of NaOH with 0.18 % trisodium citrate before homogenisation was beneficial. The stage at which citrate was added during processing was critical to the degree of viscosity increase (as opposed to gelation) in the product during 45 °C incubation. The component responsible for age-gelation was present in the milk-solids non fat portion of the cream and variations in the creams used were important in the age-gelation phenomenon Results indicated that, in addition to possibly Ca++, the micellar casein portion of serum may play a role in gelation. The role of the low molecular weight surfactants, sodium stearoyl lactylate and monodiglycerides in preventing gelation, was influenced by the presence of trisodium citrate. Clustering of fat globules and age-gelation were inhibited when 0.18 % citrate was included. Inclusion of sodium stearoyl lactylate, but not monodiglycerides, reduced the extent of viscosity increase at 45 °C in citrate containing liqueurs.

VAMP - a vision based sensor network for health care hygiene

Adequate hand-washing has been shown to be a critical activity in preventing the transmission of infections such as MRSA in health-care environments. Hand-washing guidelines published by various health-care related institutions recommend a technique incorporating six hand-washing poses that ensure all areas of the hands are thoroughly cleaned. In this paper, an embedded wireless vision system (VAMP) capable of accurately monitoring hand-washing quality is presented. The VAMP system hardware consists of a low resolution CMOS image sensor and FPGA processor which are integrated with a microcontroller and ZigBee standard wireless transceiver to create a wireless sensor network (WSN) based vision system that can be retargeted at a variety of health care applications. The device captures and processes images locally in real-time, determines if hand-washing procedures have been correctly undertaken and then passes the resulting high-level data over a low-bandwidth wireless link. The paper outlines the hardware and software mechanisms of the VAMP system and illustrates that it offers an easy to integrate sensor solution to adequately monitor and improve hand hygiene quality. Future work to develop a miniaturized, low cost system capable of being integrated into everyday products is also discussed.

A simulation-based design method to transfer surface mount RF system to flip-chip die implementation

The flip-chip technology is a high chip density solution to meet the demand for very large scale integration design. For wireless sensor node or some similar RF applications, due to the growing requirements for the wearable and implantable implementations, flip-chip appears to be a leading technology to realize the integration and miniaturization. In this paper, flip-chip is considered as part of the whole system to affect the RF performance. A simulation based design is presented to transfer the surface mount PCB board to the flip-chip die package for the RF applications. Models are built by Q3D Extractor to extract the equivalent circuit based on the parasitic parameters of the interconnections, for both bare die and wire-bonding technologies. All the parameters and the PCB layout and stack-up are then modeled in the essential parts' design of the flip-chip RF circuit. By implementing simulation and optimization, a flip-chip package is re-designed by the parameters given by simulation sweep. Experimental results fit the simulation well for the comparison between pre-optimization and post-optimization of the bare die package's return loss performance. This design method could generally be used to transfer any surface mount PCB to flip-chip package for the RF systems or to predict the RF specifications of a RF system using the flip-chip technology.

Statistical method of modeling and optimization for wireless sensor nodes with different interconnect technologies and substrates

A comparison study was carried out between a wireless sensor node with a bare die flip-chip mounted and its reference board with a BGA packaged transceiver chip. The main focus is the return loss (S parameter S11) at the antenna connector, which was highly depended on the impedance mismatch. Modeling including the different interconnect technologies, substrate properties and passive components, was performed to simulate the system in Ansoft Designer software. Statistical methods, such as the use of standard derivation and regression, were applied to the RF performance analysis, to see the impacts of the different parameters on the return loss. Extreme value search, following on the previous analysis, can provide the parameters' values for the minimum return loss. Measurements fit the analysis and simulation well and showed a great improvement of the return loss from -5dB to -25dB for the target wireless sensor node.

Design and implementation of the embedded capacitance layers for decoupling of wireless sensor nodes

In this paper, the embedded capacitance material (ECM) is fabricated between the power and ground layers of the wireless sensor nodes, forming an integrated capacitance to replace the large amount of decoupling capacitors on the board. The ECM material, whose dielectric constant is 16, has the same size of the wireless sensor nodes of 3cm*3cm, with a thickness of only 14μm. Though the capacitance of a single ECM layer being only around 8nF, there are two reasons the ECM layers can still replace the high frequency decoupling capacitors (100nF in our case) on the board. The first reason is: the parasitic inductance of the ECM layer is much lower than the surface mount capacitors'. A smaller capacitance value of the ECM layer could achieve the same resonant frequency of the surface mount decoupling capacitors. Simulation and measurement fit this assumption well. The second reason is: more than one layer of ECM material are utilized during the design step to get a parallel connection of the several ECM capacitance layers, finally leading to a larger value of the capacitance and smaller value of parasitic. Characterization of the ECM is carried out by the LCR meter. To evaluate the behaviors of the ECM layer, time and frequency domain measurements are performed on the power-bus decoupling of the wireless sensor nodes. Comparison with the measurements of bare PCB board and decoupling capacitors solution are provided to show the improvement of the ECM layer. Measurements show that the implementation of the ECM layer can not only save the space of the surface mount decoupling capacitors, but also provide better power-bus decoupling to the nodes.

Team-teaching for inclusive learning: Purposes, practices and perceptions of a team-teaching initiative in Irish post-primary schools

Background. Schools unequivocally privilege solo-teaching. This research seeks to enhance our understanding of team-teaching by examining how two teachers, working in the same classroom at the same time, might or might not contribute to the promotion of inclusive learning. There are well-established policy statements that encourage change and moves towards the use of team-teaching to promote greater inclusion of students with special educational needs in mainstream schools and mainstream classrooms. What is not so well established is the practice of team-teaching in post-primary settings, with little research conducted to date on how it can be initiated and sustained, and a dearth of knowledge on how it impacts upon the students and teachers involved. Research questions and aims. In light of the paucity and inconclusive nature of the research on team-teaching to date (Hattie, 2009), the orientating question in this study asks ‘To what extent, can the introduction of a formal team-teaching initiative enhance the quality of inclusive student learning and teachers’ learning at post-primary level?’ The framing of this question emerges from ongoing political, legal and educational efforts to promote inclusive education. The study has three main aims. The first aim of this study is to gather and represent the voices and experiences of those most closely involved in the introduction of team-teaching; students, teachers, principals and administrators. The second aim is to generate a theory-informed understanding of such collaborative practices and how they may best be implemented in the future. The third aim is to advance our understandings regarding the day-to-day, and moment-to-moment interactions, between teachers and students which enable or inhibit inclusive learning. Sample. In total, 20 team-teaching dyads were formed across seven project schools. The study participants were from two of the seven project schools, Ash and Oak. It involved eight teachers and 53 students, whose age ranged from 12-16 years old, with 4 teachers forming two dyads per school. In Oak there was a class of first years (n=11) with one dyad and a class of transition year students (n=24) with the other dyad. In Ash one class group (n=18) had two dyads. The subjects in which the dyads engaged were English and Mathematics. Method. This research adopted an interpretive paradigm. The duration of the fieldwork was from April 2007 to June 2008. Research methodologies included semi-structured interviews (n=44), classroom observation (n=20), attendance at monthly teacher meetings (n=6), questionnaires and other data gathering practices which included school documentation, assessment findings and joint examination of student work samples (n=4). Results. Team-teaching involves changing normative practices, and involves placing both demands and opportunities before those who occupy classrooms (teachers and students) and before those who determine who should occupy these classrooms (principals and district administrators). This research shows how team-teaching has the potential to promote inclusive learning, and when implemented appropriately, can impact positively upon the learning experiences of both teachers and students. The results are outlined in two chapters. In chapter four, Social Capital Theory is used in framing the data, the change process of bonding, bridging and linking, and in capturing what the collaborative action of team-teaching means, asks and offers teachers; within classes, between classes, between schools and within the wider educational community. In chapter five, Positioning Theory deductively assists in revealing the moment-to-moment, dynamic and inclusive learning opportunities, that are made available to students through team-teaching. In this chapter a number of vignettes are chosen to illustrate such learning opportunities. These two theories help to reveal the counter-narrative that team-teaching offers, regarding how both teachers and students teach and learn. This counter-narrative can extend beyond the field of special education and include alternatives to the manner in which professional development is understood, implemented, and sustained in schools and classrooms. Team-teaching repositions teachers and students to engage with one another in an atmosphere that capitalises upon and builds relational trust and shared cognition. However, as this research study has found, it is wise that the purposes, processes and perceptions of team-teaching are clear to all so that team-teaching can be undertaken by those who are increasingly consciously competent and not merely accidentally adequate. Conclusions. The findings are discussed in the context of the promotion of effective inclusive practices in mainstream settings. I believe that such promotion requires more nuanced understandings of what is being asked of, and offered to, teachers and students. Team-teaching has, and I argue will increasingly have, its place in the repertoire of responses that support effective inclusive learning. To capture and extend such practice requires theoretical frameworks that facilitate iterative journeys between research, policy and practice. Research to date on team-teaching has been too focused on outcomes over short timeframes and not focused enough on the process that is team-teaching. As a consequence team-teaching has been under-used, under-valued, under-theorised and generally not very well understood. Moving from classroom to staff room and district board room, theoretical frameworks used in this research help to travel with, and understand, the initiation, engagement and early consequences of team-teaching within and across the educational landscape. Therefore, conclusions from this study have implications for the triad of research, practice and policy development where efforts to change normative practices can be matched by understandings associated with what it means to try something new/anew, and what it means to say it made a positive difference.

The ecology of the European hedgehog (Erinaceus europaeus) in rural Ireland

This study on the ecology of Irish hedgehogs (Erinaceus europaeus) has provided information on detection techniques, home range, habitat selection, hedgehog prey, nesting, courtship, genetics, road mortality, parasites, ageing and morphology of this species. Data were obtained from a focal study area in rural Cork, in which 24 radio tagged hedgehogs were monitored from June 2008 to June 2010. Further data were obtained through road kill surveys and the collection of hedgehog carcasses from around Ireland. Hedgehogs of both sexes were found to display philopatry. Habitat was not used in proportion to its availability, but certain habitats were selected and a similar pattern of habitat selection was evident in successive years. Hedgehogs preferred arable land in September and October and, unlike studies elsewhere, were observed to forage in the centre of fields. Badgers were regularly seen at the study site and did not appear to negatively affect hedgehogs’ use of the area. Instead the intra- and inter-habitat distribution of hedgehogs was closely correlated with that of their potential prey. Male hedgehogs had a mean annual home range of 56 ha and females 16.5 ha, although monthly home ranges were much more conservative. Male home range peaked during the breeding season (April-July) and a peak in road deaths was observed during these months. The majority of road kill (54%) were individuals of one year old or less, however, individuals were found up to eight and nine years of age. Genetic analysis showed a distinct lack of genetic variation amongst Irish hedgehogs and suggests colonisation by a small number of individuals. The ectoparasites, Archaeopsylla erinacei, Ixodes hexagonus and Ixodes canisuga were recorded in addition to the endoparasites Crenosoma striatum and Capillaria erinacei. In light of the reported decline in many areas of the hedgehogs’ range, it is a species of conservation concern, and this is the first study examining the ecology of the hedgehog in Ireland.

Development of miniaturized wireless sensor nodes suitable for building energy management and modelling

Buildings consume 40% of Ireland's total annual energy translating to 3.5 billion (2004). The EPBD directive (effective January 2003) places an onus on all member states to rate the energy performance of all buildings in excess of 50m2. Energy and environmental performance management systems for residential buildings do not exist and consist of an ad-hoc integration of wired building management systems and Monitoring & Targeting systems for non-residential buildings. These systems are unsophisticated and do not easily lend themselves to cost effective retrofit or integration with other enterprise management systems. It is commonly agreed that a 15-40% reduction of building energy consumption is achievable by efficiently operating buildings when compared with typical practice. Existing research has identified that the level of information available to Building Managers with existing Building Management Systems and Environmental Monitoring Systems (BMS/EMS) is insufficient to perform the required performance based building assessment. The cost of installing additional sensors and meters is extremely high, primarily due to the estimated cost of wiring and the needed labour. From this perspective wireless sensor technology provides the capability to provide reliable sensor data at the required temporal and spatial granularity associated with building energy management. In this paper, a wireless sensor network mote hardware design and implementation is presented for a building energy management application. Appropriate sensors were selected and interfaced with the developed system based on user requirements to meet both the building monitoring and metering requirements. Beside the sensing capability, actuation and interfacing to external meters/sensors are provided to perform different management control and data recording tasks associated with minimisation of energy consumption in the built environment and the development of appropriate Building information models(BIM)to enable the design and development of energy efficient spaces.

The protection and security of vulnerable populations in complex emergencies using the Dadaab refugee camps in the north eastern province of Kenya as a case study

The past two decades has seen a dramatic upheaval in the international world order: the end of the Cold War, the 9/11 attacks and the subsequent 'War on Terror', increased Jihadist activities, the accelerated pace of globalization, climate change and the 2008 global financial crisis have contributed to fear, uncertainty, poverty, conflict, massive displacements of populations of asylum seekers and refugees globally and a proliferation of Protracted Refugee Situations (PRS), defined as situations in which refugees have been in exile 'for 5 years or more after their initial displacement, without immediate prospects for implementation of durable solutions. In the past two decades there has been a huge proliferation of these with more than 7.2 million refugees now trapped in these PRS, with a further 16 million internally displaced persons (IDPs) trapped in camps within their own countries. The Dadaab refugee complex in Kenya, which of as March 2012, holds over 463,000 refugees, is the most significant and extreme example in recent times of a PRS. It was established in 1991 following the collapse of the Somali Government of Dictator Siad Barre, and the disintegration of Somalia into the chaos that still exists today. PRS such as Dadaab raise particular issues about humanitarianism in terms of aid, protection, security, human rights and the actions (or inaction) of the various stakeholders on an international, national and local level. This thesis investigates these issues by the use of a case study methodology on Dadaab as a PRS, framed in the context of humanitarianism and in particular the issues that arise in terms of how the international community, the UN system and individual states provide assistance and protection to vulnerable populations. Although the refugee camps have been in existence (as of 2012) for over 20 years, there has never been such a detailed study of Dadaab (or any other PRS) undertaken to date and would be of interest to academics in the areas of international relations, refugee/migration studies and global Governance as well as practitioners in both humanitarian response and development

Equal citizenship for a new society? An analysis of training and employment opportunities for republican ex-prisoners in Belfast

Previous research evidence appears to suggest that while they suffer from similiar socio-economic problems to the wider nationalist community, the problems for republican ex-prisoners seem to be on a greater scale. The primary objective of this research was to investigate the current obstacles facing republication ex-prisoners in training and employment and to make proposals for change.

Planning the deployment of fault-tolerant wireless sensor networks

Since Wireless Sensor Networks (WSNs) are subject to failures, fault-tolerance becomes an important requirement for many WSN applications. Fault-tolerance can be enabled in different areas of WSN design and operation, including the Medium Access Control (MAC) layer and the initial topology design. To be robust to failures, a MAC protocol must be able to adapt to traffic fluctuations and topology dynamics. We design ER-MAC that can switch from energy-efficient operation in normal monitoring to reliable and fast delivery for emergency monitoring, and vice versa. It also can prioritise high priority packets and guarantee fair packet deliveries from all sensor nodes. Topology design supports fault-tolerance by ensuring that there are alternative acceptable routes to data sinks when failures occur. We provide solutions for four topology planning problems: Additional Relay Placement (ARP), Additional Backup Placement (ABP), Multiple Sink Placement (MSP), and Multiple Sink and Relay Placement (MSRP). Our solutions use a local search technique based on Greedy Randomized Adaptive Search Procedures (GRASP). GRASP-ARP deploys relays for (k,l)-sink-connectivity, where each sensor node must have k vertex-disjoint paths of length ≤ l. To count how many disjoint paths a node has, we propose Counting-Paths. GRASP-ABP deploys fewer relays than GRASP-ARP by focusing only on the most important nodes – those whose failure has the worst effect. To identify such nodes, we define Length-constrained Connectivity and Rerouting Centrality (l-CRC). Greedy-MSP and GRASP-MSP place minimal cost sinks to ensure that each sensor node in the network is double-covered, i.e. has two length-bounded paths to two sinks. Greedy-MSRP and GRASP-MSRP deploy sinks and relays with minimal cost to make the network double-covered and non-critical, i.e. all sensor nodes must have length-bounded alternative paths to sinks when an arbitrary sensor node fails. We then evaluate the fault-tolerance of each topology in data gathering simulations using ER-MAC.

FLT3-driven redox signalling in acute myeloid leukaemia

Acute myeloid leukaemia refers to cancer of the blood and bone marrow characterised by the rapid expansion of immature blasts of the myeloid lineage. The aberrant proliferation of these blasts interferes with normal haematopoiesis, resulting in symptoms such as anaemia, poor coagulation and infections. The molecular mechanisms underpinning acute myeloid leukaemia are multi-faceted and complex, with a range of diverse genetic and cytogenetic abnormalities giving rise to the acute myeloid leukaemia phenotype. Amongst the most common causative factors are mutations of the FLT3 gene, which codes for a growth factor receptor tyrosine kinase required by developing haematopoietic cells. Disruptions to this gene can result in constitutively active FLT3, driving the de-regulated proliferation of undifferentiated precursor blasts. FLT3-targeted drugs provide the opportunity to inhibit this oncogenic receptor, but over time can give rise to resistance within the blast population. The identification of targetable components of the FLT3 signalling pathway may allow for combination therapies to be used to impede the emergence of resistance. However, the intracellular signal transduction pathway of FLT3 is relatively obscure. The objective of this study is to further elucidate this pathway, with particular focus on the redox signalling element which is thought to be involved. Signalling via reactive oxygen species is becoming increasingly recognised as a crucial aspect of physiological and pathological processes within the cell. The first part of this study examined the effects of NADPH oxidase-derived reactive oxygen species on the tyrosine phosphorylation levels of acute myeloid leukaemia cell lines. Using two-dimensional phosphotyrosine immunoblotting, a range of proteins were identified as undergoing tyrosine phosphorylation in response to NADPH oxidase activity. Ezrin, a cytoskeletal regulatory protein and substrate of Src kinase, was selected for further study. The next part of this study established that NADPH oxidase is subject to regulation by FLT3. Both wild type and oncogenic FLT3 signalling were shown to affect the expression of a key NADPH oxidase subunit, p22phox, and FLT3 was also demonstrated to drive intracellular reactive oxygen species production. The NADPH oxidase target protein, Ezrin, undergoes phosphorylation on two tyrosine residues downstream of FLT3 signalling, an effect which was shown to be p22phox-dependent and which was attributed to the redox regulation of Src. The cytoskeletal associations of Ezrin and its established role in metastasis prompted the investigation of the effects of FLT3 and NADPH oxidase activity on the migration of acute myeloid leukaemia cell lines. It was found that inhibition of either FLT3 or NADPH oxidase negatively impacted on the motility of acute myeloid leukaemia cells. The final part of this study focused on the relationship between FLT3 signalling and phosphatase activity. It was determined, using phosphatase expression profiling and real-time PCR, that several phosphatases are subject to regulation at the levels of transcription and post-translational modification downstream of oncogenic FLT3 activity. In summary, this study demonstrates that FLT3 signal transduction utilises a NADPH oxidase-dependent redox element, which affects Src kinase, and modulates leukaemic cell migration through Ezrin. Furthermore, the expression and activity of several phosphatases is tightly linked to FLT3 signalling. This work reveals novel components of the FLT3 signalling cascade and indicates a range of potential therapeutic targets.

All-optical OFDM and distributed Raman amplification: Challenges to enable high capacities and extend reach

We review recent advances in all-optical OFDM technologies and discuss the performance of a field trial of a 2 Tbit/s Coherent WDM over 124 km with distributed Raman amplification. The results indicate that careful optimisation of the Raman pumps is essential. We also consider how all-optical OFDM systems perform favourably against energy consumption when compared with alternative coherent detection schemes. We argue that, in an energy constrained high-capacity transmission system, direct detected all-optical OFDM with 'ideal' Raman amplification is an attractive candidate for metro area datacentre interconnects with ~100 km fibre spans, with an overall energy requirement at least three times lower than coherent detection techniques.

Wavelength division multiplexing at 2μm

This paper shows, for the first time, the implementation of a WDM subsystem at the 2μm wavelength window with mixed formats. Three wavelength channels were directly modulated withBPSK Fast-OFDM at 5Gbit/s per channel, with a fourth channel NRZ-OOK externally modulated at8.5Gbit/s giving a total capacity in excess of 20 Gbit/s.

Leaf galls in our native trees and shrubs

Plant galls constitute a branch of study and research which has been to me a subject of much interest for some time. At the start of this work, it was intended to include Plant galls in general, but after some months this was found to be too comprehensive a field and would in fact take a great many years to study fully. Even leaf galls alone, both of herbs and trees provide so large a field of investigation that ultimately I decided to confine my attention to those or our native trees and shrubs. Upon looking up the literature on this subject, it will be found that in nearly all cases, either the gall is described fully and mere mention made or the agent concerned in its production, or vice versa. This state of things is most unsatisfactory, as in studying galls, both the gall-maker and the gall formation must be examined in detail before it is safe to apply nomenclature. This work, therefore, sets out to give accurate and scientific descriptions of both galls and gall-makers. The difficulties encountered are manifold; firstly, our trees are all deciduous, hence, the collecting period is necessarily restricted to that time of the year between the appearance of the buds and the fall of the leaf. Secondly, the rearing of imagines is always difficult, especially in the case or the autumn gall; more will be said on this matter later. Lastly, due to war-time conditions much trouble was experienced in obtaining suitable literature and many invaluable books on this subject were unprocurable. The Plates at the back have all been copied from original material except in the case or the Phytoptid mites which have been sketched with the help of illustrations, the reason for this being the difficulty of making suitable mounts of these minute creatures, Where possible all stages or at least larva and imago have been sketched, together with the host plant and the type of gall-formation produced. Slides have also been made of most larvae and the imagines attached to cards and pinned on to pith or cork in the usual manner.