The protection and security of vulnerable populations in complex emergencies using the Dadaab refugee camps in the north eastern province of Kenya as a case study

The past two decades has seen a dramatic upheaval in the international world order: the end of the Cold War, the 9/11 attacks and the subsequent 'War on Terror', increased Jihadist activities, the accelerated pace of globalization, climate change and the 2008 global financial crisis have contributed to fear, uncertainty, poverty, conflict, massive displacements of populations of asylum seekers and refugees globally and a proliferation of Protracted Refugee Situations (PRS), defined as situations in which refugees have been in exile 'for 5 years or more after their initial displacement, without immediate prospects for implementation of durable solutions. In the past two decades there has been a huge proliferation of these with more than 7.2 million refugees now trapped in these PRS, with a further 16 million internally displaced persons (IDPs) trapped in camps within their own countries. The Dadaab refugee complex in Kenya, which of as March 2012, holds over 463,000 refugees, is the most significant and extreme example in recent times of a PRS. It was established in 1991 following the collapse of the Somali Government of Dictator Siad Barre, and the disintegration of Somalia into the chaos that still exists today. PRS such as Dadaab raise particular issues about humanitarianism in terms of aid, protection, security, human rights and the actions (or inaction) of the various stakeholders on an international, national and local level. This thesis investigates these issues by the use of a case study methodology on Dadaab as a PRS, framed in the context of humanitarianism and in particular the issues that arise in terms of how the international community, the UN system and individual states provide assistance and protection to vulnerable populations. Although the refugee camps have been in existence (as of 2012) for over 20 years, there has never been such a detailed study of Dadaab (or any other PRS) undertaken to date and would be of interest to academics in the areas of international relations, refugee/migration studies and global Governance as well as practitioners in both humanitarian response and development

Variations in total and differential milk somatic cell counts and plasmin levels and their role in proteolysis and quality of milk and cheese

Increased plasmin and plasminogen levels and elevated somatic cell counts (SCC) and polymorphonuclear leucocyte levels (PMN) were evident in late lactation milk. Compositional changes in these milks were associated with increased SCC. The quality of late lactation milks was related to nutritional status of herds, with milks from herds on a high plane of nutrition having composition and clotting properties similar to, or superior to, early-mid lactation milks. Nutritionally-deficient cows had elevated numbers of polymorphonuclear leucocytes (PMNs) in their milk, elevated plasmin levels and increased overall proteolytic activity. The dominant effect of plasmin on proteolysis in milks of low SCC was established. When present in elevated numbers, somatic cells and PMNs in particular had a more significant influence on the proteolysis of both raw and pasteurised milks than plasmin. PMN protease action on the caseins showed proteolysis products of two specific enzymes, cathepsin B and elastase, which were also shown in high SCC milk. Crude extracts of somatic cells had a high specificity on αs1-casein. Cheeses made from late lactation milks had increased breakdown of αs1-casein, suggestive of the action of somatic cell proteinases, which may be linked to textural defects in cheese. Late lactation cheeses also showed decreased production of small peptides and amino acids, the reason for which is unknown. Plasmin, which is elevated in activity in late lactation milk, accelerated the ripening of Gouda-type cheese, but was not associated with defects of texture or flavour. The retention of somatic cell enzymes in cheese curd was confirmed, and a potential role in production of bitter peptides identified. Cheeses made from milks containing high levels of PMNs had accelerated αs1-casein breakdown relative to cheeses made from low PMN milk of the same total SCC, consistent with the demonstrated action of PMN proteinases. The two types of cheese were determined significantly different by blind triangle testing.

Cellular and in-vitro models to assess antioxidant activities of seaweed extracts and the potential use of the extracts as ingredients

Seaweeds contain a range of antioxidant compounds such as polyphenols, carotenoids, sulphated polysaccharides and vitamins and have the potential to be used as ingredients in neutraceuticals. The antioxidant activity of crude 60% methanol extracts prepared from five Irish seaweeds, Ascophyllum nodosum, Laminaria hyperborea, Pelvetia canaliculata, Fucus vesiculosus and Fucus serratus were examined using in-vitro assays and a cell model system to determine the antioxidant activity of the extracts and their ability to protect against H2O2 and tert-BOOH-induced DNA damage and alterations in cellular antioxidant status in the human adenocarcinoma, Caco-2 cell line. To optimise the extraction of antioxidant compounds from seaweeds, an accelerated solvent extraction (ASE®) was used in combination with food grade solvents. The antioxidant activity of these extracts against H2O2 and tert-BOOH-induced DNA damage and alterations in cellular antioxidant status was also assessed. Extracts that exhibited the highest antioxidant activity, A. nodosum (100% water and 80% ethanol extracts) and F. vesiculosus (60% ethanol extract) were selected as ingredients for incorporation into fluid milk and yogurt at concentrations of 0.25% and 0.5%. The addition of the seaweed extracts to milk and yogurt did not affect the pH or shelf-life properties of the products. Seaweed addition did however significantly influence the colour properties of the milk and yogurt. Yellowness values were significantly higher in yogurts containing F. vesiculosus at both concentrations and A. nodosum (80% ethanol) at the 0.5% concentration. In milk, the F. vesiculosus (60% ethanol) and A. nodosum (80% ethanol) at both the 0.25% and the 0.5% concentrations had higher greenness and yellowness values than the milk containing A. nodosum (100% water). Sensory analysis revealed that appearance and flavour governed the overall acceptability of yogurts with the control yogurt, and yogurts containing A. nodosum (100% water) were the most preferred samples by panellists. However, in the milk trial the perception of a fishy taste was the determining factor in the negative perception of milk. The unsupplemented control and the milk containing A. nodosum (100% water) at a concentration of 0.5% were the most overall accepted milk samples by the sensory panellists. The antioxidant activity of the extracts in milk and yogurt remained stable during storage as determined by the in-vitro assays. Seaweed supplemented milk and yogurt were also subjected to an in-vitro digestion procedure which mimics the human digestive system. The milk and yogurt samples and their digestates were added to Caco-2 cells to investigate their antioxidant potential however neither the undigested or digested samples protected against H2O2-induced DNA damage in Caco-2 cells.

Application of mesoporous silica for the oral delivery of poorly water-soluble drugs

The objective of this thesis was to improve the dissolution rate of the poorly waters-soluble drug, fenofibrate by processing it with a high surface area carrier, mesoporous silica. The subsequent properties of the drug – silica composite were studied in terms of drug distribution within the silica matrix, solid state and release properties. Prior to commencing any experimental work, the properties of unprocessed mesoporous silica and fenofibrate were characterised (chapter 3), this allowed for comparison with the processed samples studied in later chapters. Fenofibrate was a highly stable, crystalline drug that did not adsorb moisture, even under long term accelerated storage conditions. It maintained its crystallinity even after SC-CO2 processing. Its dissolution rate was limited and dependent on the characteristics of the particular in vitro media studied. Mesoporous silica had a large surface area and mesopore volume and readily picked up moisture when stored under long term accelerated storage conditions (75% RH, 40 oC). It maintained its mesopore character after SC-CO2 processing. A variety of methods were employed to process fenofibrate with mesoporous silica including physical mixing, melt method, solvent impregnation and novel methods such as liquid and supercritical carbon dioxide (SC-CO2) (chapter 4). It was found that it was important to break down the fenofibrate particulate structure to a molecular state to enable drug molecules enter into the silica mesopores. While all processing methods led to some increase in fenofibrate release properties; the impregnation, liquid and SC-CO2 methods produced the most rapid release rates. SC-CO2 processing was further studied with a view to optimising the processing parameters to achieve the highest drug-loading efficiency possible (chapter 5). In this thesis, it was that SC-CO2 processing pressure had a bearing on drug-loading efficiency. Neither pressure, duration or depressurisation rate affected drug solid state or release properties. The amount of drug that could be loaded onto to the mesoporous silica successfully was also investigated at different ratios of drug mass to silica surface area under constant SC-CO2 conditions; as the drug – silica ratio increased, the drug-loading efficiency decreased, while there was no effect on drug solid state or release properties. The influence of the number of drug-loading steps was investigated (chapter 6) with a view to increasing the drug-loading efficiency. This multiple step approach did not yield an increase in drug-loading efficiency compared to the single step approach. It was also an objective in this chapter to understand how much drug could be loaded into silica mesopores; a method based on the known volume of the mesopores and true density of drug was investigated. However, this approach led to serious repercussions in terms of the subsequent solid state nature of the drug and its release performance; there was significant drug crystallinity and reduced release extent. The impact of in vitro release media on fenofibrate release was also studied (chapter 6). Here it was seen that media containing HCl led to reduced drug release over time compared to equivalent media not containing HCl. The key findings of this thesis are discussed in chapter 7 and included: 1. Drug – silica processing method strongly influenced drug distribution within the silica matrix, drug solid state and release. 2. The silica surface area and mesopore volume also influenced how much drug could be loaded. It was shown that SC-CO2 processing variables such as processing pressure (13.79 – 41.37 MPa), duration time (4 – 24 h) and depressurisation rate (rapid or controlled) did not influence the drug distribution within the SBA- 15 matrix, drug solid state form or release. Possible avenues of research to be considered going forward include the development and application of high resolution imaging techniques to visualise drug molecules within the silica mesopores. Also, the issues surrounding SBA-15 usage in a pharmaceutical manufacturing environment should be addressed.

Inquiring into perspective transformation in university education

My Portfolio of Exploration tackles the difficult question as to whether adult mental development can be accelerated and if so how. Rooted in constructive-developmental ideas, adult mental development is explained as an evolutionary unfolding of human capability. Going beyond this I look at the possibility of advancing development as transformational growth in adulthood in the belief that a broader perspective leads to increased effectiveness in professional life. Initially I explored my own meaning making, to make sense of my experiences, knowledge, relationships and my own motivations. This exploration has provided me with a ‘developmental bridge’ between my current way of knowing and a new more enlightened way. I have come to view my way of making meaning in the world as an evolving and progressive sequence of emotional and cognitive development. Through the formation of new stretching experiences, increased self - awareness and reflection my previous perspective has been overtaken by a more complex form of being aware of myself, others and the world. I refer to this process of growth as transformation. As part of my own transformational work I have conducted an inquiry into transformational growth and learning in the early academic life of university undergraduates. The result shows how accelerated adult mental development can be achieved in an academic environment ably preparing students for the workplace. This new model of education is part of a truly unique and exciting model signalling ground-breaking change for the undergraduate experience. The overhaul of a traditional BA degree in Economics into a world-class transformational programme is discussed through-out my Portfolio. Central to my broadening awareness is the challenge and nurturing required to awaken the student’s ‘internal authority’ . This involves stimulating students to take ownership for their own thinking, steering them away from the passivity and complacency of thinking through the minds of others. In doing so, the ultimate aim of renewing the BA is to narrow the developmental ‘mismatch’ which exists for m any college students between them and the world of work, by encouraging and inviting them to take on the challenge of thinking independently. Mindfulness, awareness, and personal authority are treated with reverence throughout the exploration as I consider them core parts of the students engaging with development. Engagement is construed as an active and open-minded process of awareness involving planning and reviewing one’s own goals and performance, engaging in constructive feedback, reflection and new action. I conclude with a view that the journey of adult mental development is relentless and that undergraduate education represents a crucial beginning. The value and relevance of transformational education rooted in developmental principles provides a significant opportunity in advancing development and perspectives at the start of adult life.

Novel co-crystals of the nutraceutical sinapic acid

Sinapic acid (SA) is a nutraceutical with known anti-oxidant, anti-microbial, anti-inflammatory, anti-cancer, and anti-anxiety properties. Novel co-crystals of SA were prepared with co-formers belonging to the category of GRAS [isonicotinic acid (INC), nicotinamide (NIA)], non-GRAS [4-pyridinecarbonitrile (PYC)], and active pharmaceutical ingredients (APIs) [6-propyl-2-thiouracil (PTU)] list of compounds. Structural study based on the X-ray crystal structures revealed the intermolecular hydrogen-bonded interactions and molecular packing. The crystal structure of sinapic acid shows the anticipated acid-acid homodimer along with discrete hydrogen bonds between the acid carbonyl and the phenolic moiety. The robust acid-acid homodimer appears to be very stable and is retained in the structures of two co-crystals (SA[middle dot]NIA and SA[middle dot]PYC). In these cases, co-crystallization occurs via intermolecular phenol O-H[three dots, centered]Naromatic hydrogen bonds between the co-formers. In the SA[middle dot]PTU[middle dot]2MeCN co-crystal the acid-acid homodimer gives way to the anticipated acid-amide heterodimer, with the phenolic moiety of SA hydrogen-bonded to acetonitrile. Attempts at obtaining the desolvated co-crystal led to lattice breakdown, thus highlighting the importance of acetonitrile in the formation of the co-crystal. Among the co-crystals examined, SA[middle dot]INC (5 weeks), SA[middle dot]NIA (8 weeks) and SA[middle dot]PYC (5 weeks) were found to be stable under accelerated humidity conditions (40 [degree]C, 75% RH), whereas SA[middle dot]PTU[middle dot]2MeCN decomposed after one week into individual components due to solvent loss.