Piezoelectric energy harvesting using blood-flow-like excitation for implantable devices

The goal of this research is to produce a system for powering medical implants to increase the lifetime of the implanted devices and reduce the battery size. The system consists of a number of elements – the piezoelectric material for generating power, the device design, the circuit for rectification and energy storage. The piezoelectric material is analysed and a process for producing a repeatable high quality piezoelectric material is described. A full width half maximum (FWHM) of the rocking curve X-Ray diffraction (XRD) scan of between ~1.5° to ~1.7° for test wafers was achieved. This is state of the art for AlN on silicon and means devices with good piezoelectric constants can be fabricated. Finite element modelling FEM) was used to design the structures for energy harvesting. The models developed in this work were established to have an accuracy better than 5% in terms of the difference between measured and modelled results. Devices made from this material were analysed for power harvesting ability as well as the effect that they have on the flow of liquid which is an important consideration for implantable devices. The FEM results are compared to experimental results from laser Doppler vibrometry (LDV), magnetic shaker and perfusion machine tests. The rectifying circuitry for the energy harvester was also investigated. The final solution uses multiple devices to provide the power to augment the battery and so this was a key feature to be considered. Many circuits were examined and a solution based on a fully autonomous circuit was advanced. This circuit was analysed for use with multiple low power inputs similar to the results from previous investigations into the energy harvesting devices. Polymer materials were also studied for use as a substitute for the piezoelectric material as well as the substrate because silicon is more brittle.

Infant nutrition and the gut microbiota

Establishment of the intestinal microbiota commences at birth and this colonisation is influenced by a number of factors including mode of delivery, gestational age, mode of feeding, environmental factors and host genetics. As this initial establishment may well influence the health of an individual later in life, it is imperative to understand this process. Therefore, this thesis set out to investigate how early infant nutrition influences the development of a healthy gut microbiota. As part of the INFANTMET project, the intestinal microbiota of 199 breastfed infants was investigated using both culture-dependent and culture-independent approaches. This study revealed that delivery mode and gestational age had a significant impact on early microbial communities. In order to understand host genotype-microbiota interactions, the gut microbiota composition of dichorionic triplets was also investigated. The results suggested that initially host genetics play a significant role in the composition of an individual’s gut microbiota, but by month 12 environmental factors are the major determinant. To investigate the origin of hydrogen sulphide in a case of nondrug- induced sulfhemoglobinemia in a preterm infant, the gut microbiota composition was determined. This analysis revealed the presence of Morganella morganii, a producer of hydrogen sulphide and hemolysins, at a relative abundance 38%, which was not detected in control infants. Following on from this, the negative and short term consequences of intrapartum antibiotic prophylaxis exposure on the early infant intestinal microbiota composition were demonstrated, particularly in breast-fed infants, which are recovered by day 30. Finally, the composition of the breast milk microbiota over the first three months of life was characterised. A core of 12 genera were identified amongst women and the remainder comprised some 195 genera which were individual specific and subject to variations over time. The results presented in this thesis have demonstrated that the development of the infant gut microbiota is complex and highly individual. Clear alterations in the intestinal microbiota establishment process in C-section delivered, preterm and antibiotic exposed infants were shown. Taken together, long-term health benefits for infants, particularly those vulnerable groups, may be conferred through the design of probiotic and prebiotic food ingredients and supplements.

Assessment in primary education in Ireland

This doctoral study examines assessment in primary education in the Republic of Ireland. The nature and purpose of assessment offer an insight into the values which are prioritised by an education system. In 2011, in the Republic of Ireland, the Department of Education and Skills (DES) published a strategy aiming to improve standards of literacy and numeracy. The document, entitled, Literacy and numeracy for learning and life: the national strategy to improve literacy and numeracy for children and young people 2011-2020, contains improvement targets as measured by standardised tests. It also mandates the increased use of standardised tests in primary education, and directs that aggregated scores should be reported to both Boards of Management and the DES. The study is framed by the theoretical perspectives of Michel Foucault and Pierre Bourdieu. Both of these commentators examine social policy and practice in an effort to provide insight into the history and operation of social institutions. This study is especially influenced by Foucault’s archaeology and genealogy of knowledge, and his notion of governmentality. It is also particularly cognisant of Bourdieu’s thoughts on habitus, doxa and capital. The study contains reviews of literature in the areas of assessment, assessment policy, and assessment policy in Ireland. These reviews highlight current debate in each of these areas while also grounding this debate in an historical context. The dissertation contains four empirical sections. 1) It analyses policy documents prepared in the development of the published strategy as well as investigating the strategy itself. In so doing it is aware of the burgeoning influence of pan-national bodies on policy development. 2) A number of high profile policy makers were interviewed as part of the study and their views are interpreted in light of the findings of the literature reviews. 3) The perspective of teachers was sought through a questionnaire survey. This gathered data on these teachers’ views on the purpose of assessment as well as their actual practice. 4) Finally, children were also included as participants in this study. They were interviewed in focus groups and encouraged to contribute drawings as well on their views of assessment in primary school. Literacy and numeracy for learning and life is seen as a seminal document in Irish education. This study is significant in its analysis of original data from high profile policy makers, including two Ministers for Education and Skills. It is also significant in its inclusion of the perspectives of primary school pupils. Finally, the study considers the nature and role of assessment in a holistic manner by including the views of policy makers, teachers and pupils. The study notes that policy development in Ireland underwent a change in the preparation of Literacy and numeracy for learning and life and that international influences, while present, are also mediated to suit the local context. It also highlights a lack of clarity in the definition of assessment in primary education and argues that there is a lack of balance in the approaches that are prioritised. The study demonstrates that teachers are impacted by the strategy but that they also change it by focusing on their own concerns while using assessment tools. The children provide compelling evidence of the impact of assessment on the learner. The study shows how assessment tools (and school subjects) are valued with differing levels of importance by a variety of stakeholders.

Development of InAlN HEMTs for space application

This thesis investigates the emerging InAlN high electron mobility transistor (HEMT) technology with respect to its application in the space industry. The manufacturing processes and device performance of InAlN HEMTs were compared to AlGaN HEMTs, also produced as part of this work. RF gain up to 4 GHz was demonstrated in both InAlN and AlGaN HEMTs with gate lengths of 1 μm, with InAlN HEMTs generally showing higher channel currents (~150 c.f. 60 mA/mm) but also degraded leakage properties (~ 1 x 10-4 c.f. < 1 x 10-8 A/mm) with respect to AlGaN. An analysis of device reliability was undertaken using thermal stability, radiation hardness and off-state breakdown measurements. Both InAlN and AlGaN HEMTs showed excellent stability under space-like conditions, with electrical operation maintained after exposure to 9.2 Mrad of gamma radiation at a dose rate of 6.6 krad/hour over two months and after storage at 250°C for four weeks. Furthermore a link was established between the optimisation of device performance (RF gain, power handling capabilities and leakage properties) and reliability (radiation hardness, thermal stability and breakdown properties), particularly with respect to surface passivation. Following analysis of performance and reliability data, the InAlN HEMT device fabrication process was optimised by adjusting the metal Ohmic contact formation process (specifically metal stack thicknesses and anneal conditions) and surface passivation techniques (plasma power during dielectric layer deposition), based on an existing AlGaN HEMT process. This resulted in both a reduction of the contact resistivity to around 1 x 10-4 Ω.cm2 and the suppression of degrading trap-related effects, bringing the measured gate-lag close to zero. These discoveries fostered a greater understanding of the physical mechanisms involved in device operation and manufacture, which is elaborated upon in the final chapter.

Reframing Chinese animation: from classicism to postmodernism in post-1949 non-commercial Chinese animated films

This thesis focuses on Chinese non-commercial animated films produced from 1949 to date, with the aim of remapping and reframing Chinese animation in the light of existing theories, critiques, and frameworks drawn from studies in animation, film, and screen media. I suggest that Chinese animation has experienced three aesthetic transformations since 1949, primarily influenced by traditional Chinese culture, by Western modernist art and literature and, most recently, by postmodernism, respectively. Thus, the research traces and thoroughly investigates these three distinctive phases of Chinese animation in chronological order, from the classical period (1950s– 1980s) to modernism (1980s–2000s) and postmodernism (after 2000s). More in detail, I first rethink and re-evaluate the success of classical Chinese animation and the Chinese school of animation and, at the same time, I explore the influence of the political situation of the time on Chinese animation. Through careful analysis of A Da (1934–87) and other Chinese animators’ practices and theory, then, I argue that a remarkable modernist transformation took place in Chinese animation between the 1980s and 2000s, mainly driven by Western modernism and the Chinese “cultural fever” movement. Finally, through a discussion of the latest non-commercial animations produced after 2005, and especially those of Bu Hua (1973– ), for the first time I classify and theorize contemporary Chinese animations within a postmodern framework. By reframing existing views and broadening the scope of the analysis to encompass new areas and frameworks, this thesis aims to provide the reader with a comprehensive and systematic understanding of post-1949 Chinese animation and to offer an original contribute to scholarship, also working as a starting point for further research in this area.

MOVPE growth and characterization of Al(Ga)N and InAlN/AlGaN quantum wells for UV LED applications

The study of III-nitride materials (InN, GaN and AlN) gained huge research momentum after breakthroughs in the production light emitting diodes (LEDs) and laser diodes (LDs) over the past two decades. Last year, the Nobel Prize in Physics was awarded jointly to Isamu Akasaki, Hiroshi Amano and Shuji Nakamura for inventing a new energy efficient and environmental friendly light source: blue light-emitting diode (LED) from III-nitride semiconductors in the early 1990s. Nowadays, III-nitride materials not only play an increasingly important role in the lighting technology, but also become prospective candidates in other areas, for example, the high frequency (RF) high electron mobility transistor (HEMT) and photovoltaics. These devices require the growth of high quality III-nitride films, which can be prepared using metal organic vapour phase epitaxy (MOVPE). The main aim of my thesis is to study and develop the growth of III-nitride films, including AlN, u-AlGaN, Si-doped AlGaN, and InAlN, serving as sample wafers for fabrication of ultraviolet (UV) LEDs, in order to replace the conventional bulky, expensive and environmentally harmful mercury lamp as new UV light sources. For application to UV LEDs, reducing the threading dislocation density (TDD) in AlN epilayers on sapphire substrates is a key parameter for achieving high-efficiency AlGaNbased UV emitters. In Chapter 4, after careful and systematic optimisation， a working set of conditions, the screw and edge type dislocation density in the AlN were reduced to around 2.2×108 cm-2 and 1.3×109 cm-2 , respectively, using an optimized three-step process, as estimated by TEM. An atomically smooth surface with an RMS roughness of around 0.3 nm achieved over 5×5 µm 2 AFM scale. Furthermore, the motion of the steps in a one dimension model has been proposed to describe surface morphology evolution, especially the step bunching feature found under non-optimal conditions. In Chapter 5, control of alloy composition and the maintenance of compositional uniformity across a growing epilayer surface were demonstrated for the development of u-AlGaN epilayers. Optimized conditions (i.e. a high growth temperature of 1245 °C) produced uniform and smooth film with a low RMS roughness of around 2 nm achieved in 20×20 µm 2 AFM scan. The dopant that is most commonly used to obtain n-type conductivity in AlxGa1-xN is Si. However, the incorporation of Si has been found to increase the strain relaxation and promote unintentional incorporation of other impurities (O and C) during Si-doped AlGaN growth. In Chapter 6, reducing edge-type TDs is observed to be an effective appoach to improve the electric and optical properties of Si-doped AlGaN epilayers. In addition, the maximum electron concentration of 1.3×1019 cm-3 and 6.4×1018 cm-3 were achieved in Si-doped Al0.48Ga0.52N and Al0.6Ga0.4N epilayers as measured using Hall effect. Finally, in Chapter 7, studies on the growth of InAlN/AlGaN multiple quantum well (MQW) structures were performed, and exposing InAlN QW to a higher temperature during the ramp to the growth temperature of AlGaN barrier (around 1100 °C) will suffer a significant indium (In) desorption. To overcome this issue, quasi-two-tempeature (Q2T) technique was applied to protect InAlN QW. After optimization, an intense UV emission from MQWs has been observed in the UV spectral range from 320 to 350 nm measured by room temperature photoluminescence.

Fabrication of sub-10 nm lamellar structures by solvent vapour annealing of block copolymers

Fabrication of nanoscale patterns through the bottom-up approach of self-assembly of phase-separated block copolymers (BCP) holds promise for nanoelectronics applications. For lithographic applications, it is useful to vary the morphology of BCPs by monitoring various parameters to make “from lab to fab” a reality. Here I report on the solvent annealing studies of lamellae forming polystyrene-blockpoly( 4-vinylpyridine) (PS-b-P4VP). The high Flory-Huggins parameter (χ = 0.34) of PS-b-P4VP makes it an ideal BCP system for self-assembly and template fabrication in comparison to other BCPs. Different molecular weights of symmetric PS-b-P4VP BCPs forming lamellae patterns were used to produce nanostructured thin films by spin-coating from mixture of toluene and tetrahydrofuran(THF). In particular, the morphology change from micellar structures to well-defined microphase separated arrangements is observed. Solvent annealing provides a better alternative to thermal treatment which often requires long annealing periods. The choice of solvent (single and dual solvent exposure) and the solvent annealing conditions have significant effects on the morphology of films and it was found that a block neutral solvent was required to realize vertically aligned PS and P4VP lamellae. Here, we have followed the formation of microdomain structures with time development at different temperatures by atomic force microscopy (AFM). The highly mobilized chains phase separate quickly due to high Flory-Huggins (χ) parameter. Ultra-small feature size (~10 nm pitch size) nanopatterns were fabricated by using low molecular weight PSb- P4VP (PS and P4VP blocks of 3.3 and 3.1 kg mol-1 respectively). However, due to the low etch contrast between the blocks, pattern transfer of the BCP mask is very challenging. To overcome the etch contrast problem, a novel and simple in-situ hard mask technology is used to fabricate the high aspect ratio silicon nanowires. The lamellar structures formed after self-assembly of phase separated PS-b-P4VP BCPs were used to fabricate iron oxide nanowires which acted as hard mask material to facilitate the pattern transfer into silicon and forming silicon nanostructures. The semiconductor and optical industries have shown significant interest in two dimensional (2D) molybdenum disulphide (MoS2) as a potential device material due to its low band gap and high mobility. However, current methods for its synthesis are not ‘fab’ friendly and require harsh environments and processes. Here, I also report a novel method to prepare MoS2 layered structures via self-assembly of a PS-b-P4VP block copolymer system. The formation of the layered MoS2 was confirmed by XPS, Raman spectroscopy and high resolution transmission electron microscopy.

'Lines of flight': digital musical instruments, inclusive music bands, meaningful engagement in music-making and learning

In this study I examine the development of three inclusive music bands in Cork city. Derived from Jellison’s research on inclusive music education, inclusive music bands involve students with disabilities coming together with typically developing peers to make and learn music that is meaningful (Jellison, 2012). As part of this study, I established three inclusive music bands to address the lack of inclusive music making and learning experiences in Cork city. Each of these bands evolved and adapted in order to be socio-culturally relevant within formal and informal settings: Circles (community education band), Till 4 (secondary school band) and Mish Mash (third level and community band). I integrated Digital Musical Instruments into the three bands, in order to ensure access to music making and learning for band members with profound physical disabilities. Digital Musical Instruments are electronic music devices that facilitate active music making with minimal movement. This is the first study in Ireland to examine the experiences of inclusive music making and learning using Digital Musical Instruments. I propose that the integration of Digital Musical Instruments into inclusive music bands has the potential to further the equality and social justice agenda in music education in Ireland. In this study, I employed qualitative research methodology, incorporating participatory action research methodology and case study design. In this thesis I reveal the experiences of being involved in an inclusive music band in Cork city. I particularly focus on examining whether the use of this technology enhances meaningful music making and learning experiences for members with disabilities within inclusive environments. To both inform and understand the person centered and adaptable nature of these inclusive bands, I draw theoretical insights from Sen’s Capabilities Approach and Deleuze and Guatarri’s Rhizome Theory. Supported by descriptive narrative from research participants and an indepth examination of literature, I discover the optimum conditions and associated challenges of inclusive music practice in Cork city.

Performing Irishness: translations of Irish drama for the Galician stage (1921-2011)

This PhD thesis provides a detailed analysis of the role and significance of Irish drama in the Galician cultural context, from the early twentieth century onwards, through scrutiny of key works translated, adapted and mediated for the Galician stage. Drawing primarily on the theoretical framework of Descriptive Translation Studies, informed by Polysystems theory (Toury), Post-colonial Translation, research on processes of cultural translation (Bassnett, Lefevere, Venuti, Aaltonen), as well as careful comparative attention to the specificities of literary, theatrical and cultural context, I examine the factors governing the incorporation, reshaping and reception of twentieth century Irish plays in Galicia in order to produce a cultural history of the representation of Ireland on the Galician stage. Focusing on the five key periods I have identified in the translation/reception of Irish drama in Galicia, as represented in specific versions of plays by Yeats, Synge, O’Casey and McDonagh, my thesis examines in detail the particular linguistic, sociopolitical, theatrical and cultural dimensions of each rewriting and/or restaging in order to uncover the ways in which Irish identity is perceived, constructed and performed in a Galician context. Moving beyond the literary, historical and philological focus of existing studies of the reception of Irish literature and foreign dramatic texts in the Galician system, my own approach draws on Theatre and Performance Studies to attend also to the performative dimension of these processes of cultural adaptation and reception, giving full account of the different agents involved in theatre translation as a rich and complex process of multivalent cultural mediation.

Comparison between local anaesthetic agents, lidocaine and bupivacaine, in patients undergoing third molar extraction in terms of patient satisfaction.

AIMS: (1) To determine if anaesthetic agent bupivacaine, has a prolonged effect on the period of acute postoperative pain when compared to lidocaine, a shorter acting agent. (2) To determine patient’s post-operative satisfaction and preference with regard to anaesthetic choice. METHODS: This double blind, randomised, interventional clinical trial included 85 patients. All patients had bilateral impacted lower third molars of removed under general anaesthetic. All patients received 0.5% plain bupivacaine on one randomly allocated side, with 2% lidocaine (with adrenaline) administered on the opposite side. Pain was measured using visual analogue scales at 0, 30, 60 minutes and 3, 4, 6 and 8 hours post-surgery. Pain was analysed for 1 week following surgery. Psychological evaluations and patient reported outcomes, including patient satisfaction were evaluated. RESULTS: A significant difference in pain (P=0.001) was seen during the 3-8 hour post-operative period. The upper limit of the 95% confidence interval was 10.0 or above at 3hours and 4 hours post-surgery. Two-thirds of patients preferred bupivacaine. CONCLUSION: Longer lasting anaesthetics such as bupivacaine offer a longer period of analgesia, and improve overall patient satisfaction.

Design, fabrication and characterization of resonant waveguide grating based optical biosensors

The absence of rapid, low cost and highly sensitive biodetection platform has hindered the implementation of next generation cheap and early stage clinical or home based point-of-care diagnostics. Label-free optical biosensing with high sensitivity, throughput, compactness, and low cost, plays an important role to resolve these diagnostic challenges and pushes the detection limit down to single molecule. Optical nanostructures, specifically the resonant waveguide grating (RWG) and nano-ribbon cavity based biodetection are promising in this context. The main element of this dissertation is design, fabrication and characterization of RWG sensors for different spectral regions (e.g. visible, near infrared) for use in label-free optical biosensing and also to explore different RWG parameters to maximize sensitivity and increase detection accuracy. Design and fabrication of the waveguide embedded resonant nano-cavity are also studied. Multi-parametric analyses were done using customized optical simulator to understand the operational principle of these sensors and more important the relationship between the physical design parameters and sensor sensitivities. Silicon nitride (SixNy) is a useful waveguide material because of its wide transparency across the whole infrared, visible and part of UV spectrum, and comparatively higher refractive index than glass substrate. SixNy based RWGs on glass substrate are designed and fabricated applying both electron beam lithography and low cost nano-imprint lithography techniques. A Chromium hard mask aided nano-fabrication technique is developed for making very high aspect ratio optical nano-structure on glass substrate. An aspect ratio of 10 for very narrow (~60 nm wide) grating lines is achieved which is the highest presented so far. The fabricated RWG sensors are characterized for both bulk (183.3 nm/RIU) and surface sensitivity (0.21nm/nm-layer), and then used for successful detection of Immunoglobulin-G (IgG) antibodies and antigen (~1μg/ml) both in buffer and serum. Widely used optical biosensors like surface plasmon resonance and optical microcavities are limited in the separation of bulk response from the surface binding events which is crucial for ultralow biosensing application with thermal or other perturbations. A RWG based dual resonance approach is proposed and verified by controlled experiments for separating the response of bulk and surface sensitivity. The dual resonance approach gives sensitivity ratio of 9.4 whereas the competitive polarization based approach can offer only 2.5. The improved performance of the dual resonance approach would help reducing probability of false reading in precise bio-assay experiments where thermal variations are probable like portable diagnostics.

The spiritual and professional impact of stillbirth

Stillbirth is without question one of the most devastating experiences of grief for parents and families. The death of a baby is also a distressing experience for healthcare professionals who share hopes of a live healthy baby at the end of pregnancy. It is a sad reality however, that in Ireland one in 238 babies will die before birth. The creation and nurture of new life in pregnancy is a spiritual experience as a new baby is at the same time experienced and anticipated. There is little in the published literature concerning the spiritual impact of stillbirth on healthcare chaplains who are the main providers of spiritual care for parents and staff colleagues in Irish maternity units. In addition there are few qualitative studies that explore the impact of stillbirth on consultant obstetricians and no published studies on the spiritual impact of stillbirth on bereaved parents. This study explored the spiritual and professional impact of stillbirth on Irish maternity healthcare chaplains, consultant obstetricians and bereaved parents. Following an overall review of spiritual care provision following stillbirth in the Irish maternity services, thematic analysis was used in the first phase of the study following in-depth interviews with maternity healthcare chaplains. Interpretative Phenomenological Analysis was used in the second and third phases with consultant obstetricians and bereaved parents respectively. The data from both maternity healthcare chaplains and consultant obstetricians revealed that stillbirth posed immense personal, spiritual and professional challenges. Chaplains expressed the spiritual and professional impact of stillbirth in terms of perception of their role, suffering, doubt and presence as they provided care for bereaved parents. A review of spiritual care provision in the Irish maternity services revealed a diversity of practice. The data from consultant obstetricians identified considerable personal, professional and spiritual impact following stillbirth that was identified in superordinate themes of human response to stillbirth, weight of professional responsibility, conflict of personal faith and incongruence between personal faith and professional practice. Data from bereaved parents revealed that stillbirth was spiritually challenging and all parents expressed that stillbirth posed considerable challenge to their faith/ belief structure. The parents of only three babies felt that their spiritual needs were adequately addressed while in hospital. The data had six superordinate themes of searching for meaning, maintaining hope, importance of personhood, protective care, questioning core beliefs and relationships. Other findings from the data from bereaved parents outlined the importance of environment of care and communication. This study has revealed the immense impact of stillbirth on healthcare chaplains, consultant obstetricians and most especially the spiritual impact for bereaved parents. Recommendations are made for improvements in clinical and spiritual care for bereaved parents following stillbirth and for staff wellbeing and support initiatives. Further research areas are recommended in the areas of spiritual care, theological reflection, bereavement care, post-mortem consent procedures and staff wellbeing.

Development of a dissolvable microneedle influenza vaccine patch

Delivery of large molecular weight biological molecules to the epidermis and dermis is constrained by the tough outer layer of the epidermis, the stratum corneum (sc). Microneedle technologies attempt to overcome this physical barrier using sharp micron-size projections to penetrate the sc. Dissolvable microneedles (DMN), are a particular microneedle design whereby the needle structure is composed of a soluble matrix that upon application to the skin, dissolves releasing the vaccine load into skin. This thesis examines (1) the formulation and processing considerations around DMN fabrication, (2) the immunogenicity of DMN containing trivalent influenza vaccine (TIV) in pre-clinical mouse and pig models and (3) the thermostability of these DMN formulations during storage. The results demonstrate the importance of formulation for microneedle formation and mechanical strength. Trehalose and polyvinylalcohol based formulations produced optimal microneedle structures and were amenable to piezoelectric dispensing; allowing for precise multi-layered DMN to be fabricated. The effect of drying conditions was assessed and found to be critical for DMN mechanical strength and skin penetration. The antibody responses to TIV generated by DMN-mediated vaccination were comparable or greater to those induced by immunization with a commercial TIV via the IM route in mice. DMN mediated immunisation resulted in a significantly broader humoral response to heterotypic influenza viruses compared to IM delivery. Stored at 40°C, a licensed seasonal influenza vaccine incorporated into DMN array was thermostable for at least 6 month as determined by Single Radial Immunodiffusion and immunogenicity in mice. The thesis advances the field of DMN influenza vaccination by elucidating important processing and formulation considerations in the fabrication of highly reproducible DMN. It also demonstrated that DMN can induce broader, larger humoral responses than conventional IM administration while demonstrating enhanced accelerated stability. Crucially, this works advances an automated fabrication system that will allow for clinical translation of DMN.

Immunotherapy for the treatment of poor prognosis cancers

Cancer is amongst the leading causes of death worldwide and the number one cause in the developed world. Every year there are close to 10 million cancer related deaths and this corresponds to hundreds of millions of euro in health care costs and lost productivity, placing a substantial drain on the economy. The efficacy of traditional treatment modalities for cancer therapy, such as surgery, radiotherapy and chemotherapy has plateaued, and while they are undoubtedly effective at prolonging patient lifespan, there is a high rate of adverse side effects and fatal reoccurrence. Currently, there is a huge amount of interest in the areas of cancer immunosurveillance and cancer immuno-editing, which explain some of the complex interactions between the host immune system and cancer. If left unchecked, cancerous malignancies have the ability to generate an immunosuppressive microenvironment, effectively shielding themselves from elimination and promoting tumour growth and progression. To overcome this, the potential of the immune system must be harnessed and the work undertaken in this thesis sought to contribute to this goal. Focus was placed on using novel therapies, combining tumour ablation with immune-modulating antibodies to maximise tumour elimination in an immune dependent manner, to overcome immunosuppression and promote immune activation. Chapter 2 focuses on the use of ECT as a method of tumour ablation and its effects on the immune system. ECT proved to be effective at inhibiting the tumour growth both in vitro and in vivo, and conferred significant survival advantages in both small and large animal models. More importantly, ECT proved to cause tumour death in an immune dependent manner, displaying the hallmarks of Immunogenic Cell Death, increases in immune cell infiltration and generating tumour-specific immune responses. Chapter 3 focuses on combining ECT with immune checkpoint blockade inhibitors; anti- CTLA-4 and anti-PD-1. Both combinations proved to be effective at inhibiting both primary and distal tumour growth, indicating the generation of tumour specific immune responses and prolonged animal survival. In addition, the treatments caused increases in the levels of certain intra-tumoural immune cell subsets and modulated the cytokine profile of treated animals in a way that was favourable overall. Chapter 4 focuses on the combining ECT with an anti-iCOS agonist antibody, capable of causing immune co-stimulation. This novel combinational therapy proved to be the most effective by far, with a high cure rate achieved across a number of different in vivo tumour models. Total regression was seen in both primary and distal tumours, as well as spontaneous metastases, with the tumour specific immune response generated conferring total protection to animals on tumour rechallenge. Overall the data presented here adds further insight into the area of cancer immunotherapy with some of the novel combinational therapies demonstrating substantial clinic potential.

The many voices of Piedmont: language, identity and alterity in the works of modern and contemporary Piedmontese writers

The aim of this project is to carry out a linguistic analysis of a group of modern and contemporary narratives written by authors from the same Italian region: Piedmont. The novels and short stories examined stand out for the intriguing ways in which they move between a variety of idioms – Italian, Piedmontese dialects, English and pastiches, with some rare excursions into French. A sociolinguistic study and an overview of political changes that Piedmont underwent from the sixteenth to the twenty-first centuries are provided, with the purpose of outlining the region’s sociogeographical and historical background which can be seen to have fostered multilingualism in a group of writers. With the support of linguistic studies and philosophical theories on the relation between identity, alterity and language (such as Edwards’s Language and Identity and Bakhtin’s reflections on language), I then elucidate the presence of diverse linguistic varieties in selected narratives by Cesare Pavese, Beppe Fenoglio, Primo Levi, Nanni Balestrini, Fruttero & Lucentini, Benito Mazzi and Younis Tawfik. In other words, my purpose is to explain the reasons for multilingualism in each writer, as well as to underscore the ideological positions which lie behind the linguistic strategies of the authors. With this study I attempt to fill a gap and cast new light on Piedmontese literature. Although some critical studies on the use of dialect or English exist on individual authors and works (e.g. Meddemmem on Fenoglio’s use of English and Beccaria on Pavese’s inclusion of Piedmontese dialect), and some important contributions to the history of Piedmontese literature have appeared in print, to date no current, systematic study that compares different Piedmontese writers under the language/identity theme has been published. The study concludes with a summary of the evolution of plurilingualism in Piedmont and highlights the common trends in the use of multiple linguistic varieties as tools for both social demarcation and an opening up to alternative, marginalised andforeign cultures.