Quantitative Analysis of Single Nucleotide Polymorphisms within Copy Number Variation

Background Single nucleotide polymorphisms (SNPs) have been used extensively in genetics and epidemiology studies. Traditionally, SNPs that did not pass the Hardy-Weinberg equilibrium (HWE) test were excluded from these analyses. Many investigators have addressed possible causes for departure from HWE, including genotyping errors, population admixture and segmental duplication. Recent large-scale surveys have revealed abundant structural variations in the human genome, including copy number variations (CNVs). This suggests that a significant number of SNPs must be within these regions, which may cause deviation from HWE. Results We performed a Bayesian analysis on the potential effect of copy number variation, segmental duplication and genotyping errors on the behavior of SNPs. Our results suggest that copy number variation is a major factor of HWE violation for SNPs with a small minor allele frequency, when the sample size is large and the genotyping error rate is 0~1%. Conclusions Our study provides the posterior probability that a SNP falls in a CNV or a segmental duplication, given the observed allele frequency of the SNP, sample size and the significance level of HWE testing.

Household Health and Cocoa Production: A Baseline Survey of Smallholder Farming Households in Western Region, Ghana

Background Chronic illness and premature mortality from malaria, water-borne diseases, and respiratory illnesses have long been known to diminish the welfare of individuals and households in developing countries. Previous research has also shown that chronic diseases among farming populations suppress labor productivity and agricultural output. As the illness and death toll from HIV/AIDS continues to climb in most of sub-Saharan Africa, concern has arisen that the loss of household labor it causes will reduce crop yields, impoverish farming households, intensify malnutrition, and suppress growth in the agricultural sector. If chronic morbidity and premature mortality among individuals in farming households have substantial impacts on household production, and if a large number of households are affected, it is possible that an increase in morbidity and mortality from HIV/AIDS or other diseases could affect national aggregate output and exports. If, on the other hand, the impact at the household farm level is modest, or if relatively few households are affected, there is likely to be little effect on aggregate production across an entire country. Which of these outcomes is more likely in West Africa is unknown. Little rigorous, quantitative research has been published on the impacts of AIDS on smallholder farm production, particularly in West Africa. The handful of studies that have been conducted have looked mainly at small populations in areas of very high HIV prevalence in southern and eastern Africa. Conclusions about how HIV/AIDS, and other causes of chronic morbidity and mortality, are affecting agriculture across the continent cannot be drawn from these studies. In view of the importance of agriculture, and particularly smallholder agriculture, in the economies of most African countries and the scarcity of resources for health interventions, it is valuable to identify, describe, and quantify the impact of chronic morbidity and mortality on smallholder production of important crops in West Africa. One such crop is cocoa. In Ghana, cocoa is a crop of national importance that is produced almost exclusively by smallholder households. In 2003, Ghana was the world’s second-largest producer of cocoa. Cocoa accounted for a quarter of Ghana’s export revenues that year and generated 15 percent of employment. The success and growth of the cocoa industry is thus vital to the country’s overall social and economic development. Study Objectives and Methods In February and March 2005, the Center for International Health and Development of Boston University (CIHD) and the Department of Agricultural Economics and Agribusiness (DAEA) of the University of Ghana, with financial support from the Africa Bureau of the U.S. Agency for International Development and from Mars, Inc., which is a major purchaser of West African cocoa, conducted a survey of a random sample of cocoa farming households in the Western Region of Ghana. The survey documented the extent of chronic morbidity and mortality in cocoa growing households in the Western Region of Ghana, the country’s largest cocoa growing region, and analyzed the impact of morbidity and mortality on cocoa production. It aimed to answer three specific research questions. (1) What is the baseline status of the study population in terms of household size and composition, acute and chronic morbidity, recent mortality, and cocoa production? (2) What is the relationship between household size and cocoa production, and how can this relationship be used to understand the impact of adult mortality and chronic morbidity on the production of cocoa at the household level? The study population was the approximately 42,000 cocoa farming households in the southern part of Ghana’s Western Region. A random sample of households was selected from a roster of eligible households developed from existing administrative information. Under the supervision of the University of Ghana field team, enumerators were graduate students of the Department of Agricultural Economics and Agribusiness or employees of the Cocoa Services Division. A total of 632 eligible farmers participated in the survey. Of these, 610 provided complete responses to all questions needed to complete the multivariate statistical analysis reported here.

Non-clinical outcomes of antiretroviral therapy for HIV/AIDS in developing countries: a systematic literature review

The impacts of antiretroviral therapy on quality of life, mental health, labor productivity, and economic wellbeing for people living with HIV/AIDS in developing countries are only beginning to be measured. We conducted a systematic literature review to analyze the effect of antiretroviral therapy (ART) on these non-clinical indicators in developing countries and assess the state of research on these topics. Both qualitative and quantitative studies were included, as were peer-reviewed articles, gray literature, and conference abstracts and presentations. Findings are reported from 12 full-length articles, 7 abstracts, and 1 presentation (representing 16 studies). Compared to HIV-positive patients not yet on treatment, patients on ART reported significant improvements in physical, emotional and mental health and daily function. Work performance improved and absenteeism decreased, with the most dramatic changes occurring in the first three months of treatment and then leveling off. Little research has been done on the impact of ART on household wellbeing, with modest changes in child and family wellbeing within households where adults are receiving ART reported so far. Studies from developing countries have not yet assessed non-clinical outcomes of therapy beyond the first year; therefore, longitudinal outcomes are still unknown. As ART roll out extends throughout high HIV prevalence, low-resource countries and is sustained over years and decades, both positive and adverse non-clinical outcomes need to be empirically measured and qualitatively explored in order to support patient adherence and maximize treatment benefits.

Quantitative Particle Characterization by Scattered Ultrasound

The topic of this thesis is an acoustic scattering technique for detennining the compressibility and density of individual particles. The particles, which have diameters on the order of 10 µm, are modeled as fluid spheres. Ultrasonic tone bursts of 2 µsec duration and 30 MHz center frequency scatter from individual particles as they traverse the focal region of two confocally positioned transducers. One transducer acts as a receiver while the other both transmits and receives acoustic signals. The resulting scattered bursts are detected at 90° and at 180° (backscattered). Using either the long wavelength (Rayleigh) or the weak scatterer (Born) approximations, it is possible to detennine the compressibility and density of the particle provided we possess a priori knowledge of the particle size and the host properties. The detected scattered signals are digitized and stored in computer memory. With this information we can compute the mean compressibility and density averaged over a population of particles ( typically 1000 particles) or display histograms of scattered amplitude statistics. An experiment was run first run to assess the feasibility of using polystyrene polymer microspheres to calibrate the instrument. A second study was performed on the buffy coat harvested from whole human blood. Finally, chinese hamster ovary cells which were subject to hyperthermia treatment were studied in order to see if the instrument could detect heat induced membrane blebbing.

QUANTITATIVE THREE DIMENSIONAL ELASTICITY IMAGING

Neoplastic tissue is typically highly vascularized, contains abnormal concentrations of extracellular proteins (e.g. collagen, proteoglycans) and has a high interstitial fluid pres- sure compared to most normal tissues. These changes result in an overall stiffening typical of most solid tumors. Elasticity Imaging (EI) is a technique which uses imaging systems to measure relative tissue deformation and thus noninvasively infer its mechanical stiffness. Stiffness is recovered from measured deformation by using an appropriate mathematical model and solving an inverse problem. The integration of EI with existing imaging modal- ities can improve their diagnostic and research capabilities. The aim of this work is to develop and evaluate techniques to image and quantify the mechanical properties of soft tissues in three dimensions (3D). To that end, this thesis presents and validates a method by which three dimensional ultrasound images can be used to image and quantify the shear modulus distribution of tissue mimicking phantoms. This work is presented to motivate and justify the use of this elasticity imaging technique in a clinical breast cancer screening study. The imaging methodologies discussed are intended to improve the specificity of mammography practices in general. During the development of these techniques, several issues concerning the accuracy and uniqueness of the result were elucidated. Two new algorithms for 3D EI are designed and characterized in this thesis. The first provides three dimensional motion estimates from ultrasound images of the deforming ma- terial. The novel features include finite element interpolation of the displacement field, inclusion of prior information and the ability to enforce physical constraints. The roles of regularization, mesh resolution and an incompressibility constraint on the accuracy of the measured deformation is quantified. The estimated signal to noise ratio of the measured displacement fields are approximately 1800, 21 and 41 for the axial, lateral and eleva- tional components, respectively. The second algorithm recovers the shear elastic modulus distribution of the deforming material by efficiently solving the three dimensional inverse problem as an optimization problem. This method utilizes finite element interpolations, the adjoint method to evaluate the gradient and a quasi-Newton BFGS method for optimiza- tion. Its novel features include the use of the adjoint method and TVD regularization with piece-wise constant interpolation. A source of non-uniqueness in this inverse problem is identified theoretically, demonstrated computationally, explained physically and overcome practically. Both algorithms were test on ultrasound data of independently characterized tissue mimicking phantoms. The recovered elastic modulus was in all cases within 35% of the reference elastic contrast. Finally, the preliminary application of these techniques to tomosynthesis images showed the feasiblity of imaging an elastic inclusion.

Automated Placement of Cameras in a Floorplan to Satisfy Task-Specific Constraints

In many multi-camera vision systems the effect of camera locations on the task-specific quality of service is ignored. Researchers in Computational Geometry have proposed elegant solutions for some sensor location problem classes. Unfortunately, these solutions utilize unrealistic assumptions about the cameras' capabilities that make these algorithms unsuitable for many real-world computer vision applications: unlimited field of view, infinite depth of field, and/or infinite servo precision and speed. In this paper, the general camera placement problem is first defined with assumptions that are more consistent with the capabilities of real-world cameras. The region to be observed by cameras may be volumetric, static or dynamic, and may include holes that are caused, for instance, by columns or furniture in a room that can occlude potential camera views. A subclass of this general problem can be formulated in terms of planar regions that are typical of building floorplans. Given a floorplan to be observed, the problem is then to efficiently compute a camera layout such that certain task-specific constraints are met. A solution to this problem is obtained via binary optimization over a discrete problem space. In preliminary experiments the performance of the resulting system is demonstrated with different real floorplans.

Automated Camera Layout to Satisfy Task-Specific and Floorplan-Specific Coverage Requirements

In many multi-camera vision systems the effect of camera locations on the task-specific quality of service is ignored. Researchers in Computational Geometry have proposed elegant solutions for some sensor location problem classes. Unfortunately, these solutions utilize unrealistic assumptions about the cameras' capabilities that make these algorithms unsuitable for many real-world computer vision applications: unlimited field of view, infinite depth of field, and/or infinite servo precision and speed. In this paper, the general camera placement problem is first defined with assumptions that are more consistent with the capabilities of real-world cameras. The region to be observed by cameras may be volumetric, static or dynamic, and may include holes that are caused, for instance, by columns or furniture in a room that can occlude potential camera views. A subclass of this general problem can be formulated in terms of planar regions that are typical of building floorplans. Given a floorplan to be observed, the problem is then to efficiently compute a camera layout such that certain task-specific constraints are met. A solution to this problem is obtained via binary optimization over a discrete problem space. In experiments the performance of the resulting system is demonstrated with different real floorplans.

Task Assignment in a Distributed System: Improving Performance by Unbalancing Load

We consider the problem of task assignment in a distributed system (such as a distributed Web server) in which task sizes are drawn from a heavy-tailed distribution. Many task assignment algorithms are based on the heuristic that balancing the load at the server hosts will result in optimal performance. We show this conventional wisdom is less true when the task size distribution is heavy-tailed (as is the case for Web file sizes). We introduce a new task assignment policy, called Size Interval Task Assignment with Variable Load (SITA-V). SITA-V purposely operates the server hosts at different loads, and directs smaller tasks to the lighter-loaded hosts. The result is that SITA-V provably decreases the mean task slowdown by significant factors (up to 1000 or more) where the more heavy-tailed the workload, the greater the improvement factor. We evaluate the tradeoff between improvement in slowdown and increase in waiting time in a system using SITA-V, and show conditions under which SITA-V represents a particularly appealing policy. We conclude with a discussion of the use of SITA-V in a distributed Web server, and show that it is attractive because it has a simple implementation which requires no communication from the server hosts back to the task router.

A Customizable Camera-based Human Computer Interaction System Allowing People With Disabilities Autonomous Hands Free Navigation of Multiple Computing Task

Many people suffer from conditions that lead to deterioration of motor control and makes access to the computer using traditional input devices difficult. In particular, they may loose control of hand movement to the extent that the standard mouse cannot be used as a pointing device. Most current alternatives use markers or specialized hardware to track and translate a user's movement to pointer movement. These approaches may be perceived as intrusive, for example, wearable devices. Camera-based assistive systems that use visual tracking of features on the user's body often require cumbersome manual adjustment. This paper introduces an enhanced computer vision based strategy where features, for example on a user's face, viewed through an inexpensive USB camera, are tracked and translated to pointer movement. The main contributions of this paper are (1) enhancing a video based interface with a mechanism for mapping feature movement to pointer movement, which allows users to navigate to all areas of the screen even with very limited physical movement, and (2) providing a customizable, hierarchical navigation framework for human computer interaction (HCI). This framework provides effective use of the vision-based interface system for accessing multiple applications in an autonomous setting. Experiments with several users show the effectiveness of the mapping strategy and its usage within the application framework as a practical tool for desktop users with disabilities.

A Quantitative Evaluation of the AVITEWRITE Model of Handwriting Learning

Much sensory-motor behavior develops through imitation, as during the learning of handwriting by children. Such complex sequential acts are broken down into distinct motor control synergies, or muscle groups, whose activities overlap in time to generate continuous, curved movements that obey an intense relation between curvature and speed. The Adaptive Vector Integration to Endpoint (AVITEWRITE) model of Grossberg and Paine (2000) proposed how such complex movements may be learned through attentive imitation. The model suggest how frontal, parietal, and motor cortical mechanisms, such as difference vector encoding, under volitional control from the basal ganglia, interact with adaptively-timed, predictive cerebellar learning during movement imitation and predictive performance. Key psycophysical and neural data about learning to make curved movements were simulated, including a decrease in writing time as learning progresses; generation of unimodal, bell-shaped velocity profiles for each movement synergy; size scaling with isochrony, and speed scaling with preservation of the letter shape and the shapes of the velocity profiles; an inverse relation between curvature and tangential velocity; and a Two-Thirds Power Law relation between angular velocity and curvature. However, the model learned from letter trajectories of only one subject, and only qualitative kinematic comparisons were made with previously published human data. The present work describes a quantitative test of AVITEWRITE through direct comparison of a corpus of human handwriting data with the model's performance when it learns by tracing human trajectories. The results show that model performance was variable across subjects, with an average correlation between the model and human data of 89+/-10%. The present data from simulations using the AVITEWRITE model highlight some of its strengths while focusing attention on areas, such as novel shape learning in children, where all models of handwriting and learning of other complex sensory-motor skills would benefit from further research.

Task-Irrelevant Perceptual Learning Specific to the Contrast Polarity of Motion Stimuli

Studies of perceptual learning have focused on aspects of learning that are related to early stages of sensory processing. However, conclusions that perceptual learning results in low-level sensory plasticity are of great controversy, largely because such learning can often be attributed to plasticity in later stages of sensory processing or in the decision processes. To address this controversy, we developed a novel random dot motion (RDM) stimulus to target motion cells selective to contrast polarity, by ensuring the motion direction information arises only from signal dot onsets and not their offsets, and used these stimuli in conjunction with the paradigm of task-irrelevant perceptual learning (TIPL). In TIPL, learning is achieved in response to a stimulus by subliminally pairing that stimulus with the targets of an unrelated training task. In this manner, we are able to probe learning for an aspect of motion processing thought to be a function of directional V1 simple cells with a learning procedure that dissociates the learned stimulus from the decision processes relevant to the training task. Our results show learning for the exposed contrast polarity and that this learning does not transfer to the unexposed contrast polarity. These results suggest that TIPL for motion stimuli may occur at the stage of directional V1 simple cells.

A Neural Theory of Attentive Visual Search: Interactions of Boundary, Surface, Spatial, and Object Representations

Visual search data are given a unified quantitative explanation by a model of how spatial maps in the parietal cortex and object recognition categories in the inferotemporal cortex deploy attentional resources as they reciprocally interact with visual representations in the prestriate cortex. The model visual representations arc organized into multiple boundary and surface representations. Visual search in the model is initiated by organizing multiple items that lie within a given boundary or surface representation into a candidate search grouping. These items arc compared with object recognition categories to test for matches or mismatches. Mismatches can trigger deeper searches and recursive selection of new groupings until a target object io identified. This search model is algorithmically specified to quantitatively simulate search data using a single set of parameters, as well as to qualitatively explain a still larger data base, including data of Aks and Enns (1992), Bravo and Blake (1990), Chellazzi, Miller, Duncan, and Desimone (1993), Egeth, Viri, and Garbart (1984), Cohen and Ivry (1991), Enno and Rensink (1990), He and Nakayarna (1992), Humphreys, Quinlan, and Riddoch (1989), Mordkoff, Yantis, and Egeth (1990), Nakayama and Silverman (1986), Treisman and Gelade (1980), Treisman and Sato (1990), Wolfe, Cave, and Franzel (1989), and Wolfe and Friedman-Hill (1992). The model hereby provides an alternative to recent variations on the Feature Integration and Guided Search models, and grounds the analysis of visual search in neural models of preattentive vision, attentive object learning and categorization, and attentive spatial localization and orientation.