SCANNING ACOUSTIC MICROSCOPE FOR CHARACTERIZATION OF ARTERIAL PLAQUE

Unstable arterial plaque is likely the key component of atherosclerosis, a disease which is responsible for two-thirds of heart attacks and strokes, leading to approximately 1 million deaths in the United States. Ultrasound imaging is able to detect plaque but as of yet is not able to distinguish unstable plaque from stable plaque. In this work a scanning acoustic microscope (SAM) was implemented and validated as tool to measure the acoustic properties of a sample. The goal for the SAM is to be able to provide quantitative measurements of the acoustic properties of different plaque types, to understand the physical basis by which plaque may be identified acoustically. The SAM consists of a spherically focused transducer which operates in pulse-echo mode and is scanned in a 2D raster pattern over a sample. A plane wave analysis is presented which allows the impedance, attenuation and phase velocity of a sample to be de- termined from measurements of the echoes from the front and back of the sample. After the measurements, the attenuation and phase velocity were analysed to ensure that they were consistent with causality. The backscatter coefficient of the samples was obtained using the technique outlined by Chen et al [8]. The transducer used here was able to determine acoustic properties from 10-40 MHz. The results for the impedance, attenuation and phase velocity were validated for high and low-density polyethylene against published results. The plane wave approximation was validated by measuring the properties throughout the focal region and throughout a range of incidence angles from the transducer. The SAM was used to characterize a set of recipes for tissue-mimicking phantoms which demonstrate indepen- dent control over the impedance, attenuation, phase velocity and backscatter coefficient. An initial feasibility study on a human artery was performed.

EVALUATION OF HARMONIC MOTION ELASTOGRAPHY AND ACOUSTO-­OPTIC IMAGING FOR MONITORING LESION FORMATION BY HIGH INTENSITY FOCUSED ULTRASOUND

Malignant or benign tumors may be ablated with high‐intensity focused ultrasound (HIFU). This technique, known as focused ultrasound surgery (FUS), has been actively investigated for decades, but slow to be implemented and difficult to control due to lack of real‐time feedback during ablation. Two methods of imaging and monitoring HIFU lesions during formation were implemented simultaneously, in order to investigate the efficacy of each and to increase confidence in the detection of the lesion. The first, Acousto‐Optic Imaging (AOI) detects the increasing optical absorption and scattering in the lesion. The intensity of a diffuse optical field in illuminated tissue is mapped at the spatial resolution of an ultrasound focal spot, using the acousto‐optic effect. The second, Harmonic Motion Imaging (HMI), detects the changing stiffness in the lesion. The HIFU beam is modulated to force oscillatory motion in the tissue, and the amplitude of this motion, measured by ultrasound pulse‐echo techniques, is influenced by the stiffness. Experiments were performed on store‐bought chicken breast and freshly slaughtered bovine liver. The AOI results correlated with the onset and relative size of forming lesions much better than prior knowledge of the HIFU power and duration. For HMI, a significant artifact was discovered due to acoustic nonlinearity. The artifact was mitigated by adjusting the phase of the HIFU and imaging pulses. A more detailed model of the HMI process than previously published was made using finite element analysis. The model showed that the amplitude of harmonic motion was primarily affected by increases in acoustic attenuation and stiffness as the lesion formed and the interaction of these effects was complex and often counteracted each other. Further biological variability in tissue properties meant that changes in motion were masked by sample‐to‐sample variation. The HMI experiments predicted lesion formation in only about a quarter of the lesions made. In simultaneous AOI/HMI experiments it appeared that AOI was a more robust method for lesion detection.

Exogenous-Loss Awareness in Queue Management: Toward Global Fairness

For a given TCP flow, exogenous losses are those occurring on links other than the flow's bottleneck link. Exogenous losses are typically viewed as introducing undesirable "noise" into TCP's feedback control loop, leading to inefficient network utilization and potentially severe global unfairness. This has prompted much research on mechanisms for hiding such losses from end-points. In this paper, we show through analysis and simulations that low levels of exogenous losses are surprisingly beneficial in that they improve stability and convergence, without sacrificing efficiency. Based on this, we argue that exogenous loss awareness should be taken into account in any AQM design that aims to achieve global fairness. To that end, we propose an exogenous-loss aware Queue Management (XQM) that actively accounts for and leverages exogenous losses. We use an equation based approach to derive the quiescent loss rate for a connection based on the connection's profile and its global fair share. In contrast to other queue management techniques, XQM ensures that a connection sees its quiescent loss rate, not only by complementing already existing exogenous losses, but also by actively hiding exogenous losses, if necessary, to achieve global fairness. We establish the advantages of exogenous-loss awareness using extensive simulations in which, we contrast the performance of XQM to that of a host of traditional exogenous-loss unaware AQM techniques.

PeriScope: An Active Internet Probing and Measurement API

Growing interest in inference and prediction of network characteristics is justified by its importance for a variety of network-aware applications. One widely adopted strategy to characterize network conditions relies on active, end-to-end probing of the network. Active end-to-end probing techniques differ in (1) the structural composition of the probes they use (e.g., number and size of packets, the destination of various packets, the protocols used, etc.), (2) the entity making the measurements (e.g. sender vs. receiver), and (3) the techniques used to combine measurements in order to infer specific metrics of interest. In this paper, we present Periscope: a Linux API that enables the definition of new probing structures and inference techniques from user space through a flexible interface. PeriScope requires no support from clients beyond the ability to respond to ICMP ECHO REQUESTs and is designed to minimize user/kernel crossings and to ensure various constraints (e.g., back-to-back packet transmissions, fine-grained timing measurements) We show how to use Periscope for two different probing purposes, namely the measurement of shared packet losses between pairs of endpoints and for the measurement of subpath bandwidth. Results from Internet experiments for both of these goals are also presented.