A sucessão ecológica em ambientes florestais em restauração: estrutura e dinâmica da regeneração natural

Ecological restoration aims to restore the self-sustainability potential of degraded environments. The successional trajectory of areas in restoration may differ from the reference ecosystem on a number of factors, especially the disturbance history of the area and management techniques applied in order to reverse the degradation scenario. In this sense, the objective of this study was to characterize the dynamics of natural regeneration and the structure of the regenerating community in an area of ecological restoration for 25 years on the right bank of the Rio Grande in the Power Station in Camargos that belongs to the Companhia Energetica de Minas Gerais - CEMIG, Nazareno, MG, in order to identify the current state of environmental regeneration. In November 2014, there was the first community inventory of seedlings existing in regeneration subplots (2 x 2 m) within the inclusion criteria (height ≥ 10 cm and DBH <5 cm), divided into 44 subplots (11 plots) in two areas, one area in restoration (REF) and a fragment of native vegetation (FRAG). In October 2015, the second sampling was carried out, in which individuals were resampled and recruits and dead individuals quantified. The parameters abundance, floristic similarity, density, dominance, importance value, equability, richness and diversity were analyzed in both samples. The dynamics was evaluated for the number of individuals and basal area in the period of 2014-2015 and individuals distributed according to height. The history of usage area provoked different behavior between the study environments; the patterns of the FRAG and REF communities along the years allowed the distinction between environments and demonstrated great environmental diversity, with differences in the abundance of species, floristic similarity, richness, diversity, vertical structure and dynamics parameters. In the REF area, there was a considerable increase in the density of individuals along the years and the establishment of different species. In this sense, the evaluation of natural regeneration in REF has shown that resilience is gradually being resumed, a necessary condition to support the potential for environmental self-sustainability. However, given the disturbance history, it can be concluded that the environment moves to an alternative state, which is possibly different from that prior to degradation.

Caracterização fisiológica e produção de metabólitos secundários em Achillea millefolium L. após aplicação de quitosana

Elicitation with chitosan is a tool used to improve the responses of plant defense by inducing secondary metabolism routs. In addition, the adequate application of this elicitor on medicinal plants can promote the increase of major components in the composition of the oil. However, we lack information concerning which are the main physiological processes responsible for the changes in the composition of the oil. Thus, we aimed at evaluating the action of chitosan and determine an ideal concentration for optimizing the production of essential oil in Achillea millefolium L. and the changes in the physiological processes responsible for this increase. The research was conducted in greenhouse of the Plant Physiology sector of the Universidade Federal de Lavras (UFLA) with A. millefolium plants. The treatments consisted of control (water); acetic acid solvent (with no elicitor); and chitosan in the concentrations of 2, 4 and 6 g L -1 . The measurements of growth, gas exchange, enzyme activity of the antioxidant system and phenylalanine ammonia lyase (PAL), in addition to the production and composition of the essential oil. We verified that the application of chitosan promoted decrease in plant growth. However, the concentration of 4 g L -1 of chitosan induced an increase in the content and yield of the essential oil. In the oil, there was predominance of sesquiterpenic compounds, including the major compounds borneol, β-caryophyllene, β-cubebene, α-farnesene and chamazulene. The elicitation with chitosan at 4 g L -1 promoted an increase of the photosynthetic rate, activity of the antioxidant system and of PAL, however, this increase occurred in short-term, only in the first days after elicitation.

Síntese e aplicação de catalisadores à base de óxidos de cério, tungstênio e HZSM-5 para a produção do biodiesel

This work presents a study on the production of biodiesel by esterification reaction of oleic acid with methanol using batch reactor and different catalysts based on CeO2 and WO3 and HZSM-5. Acid treatment was performed in order to increase the catalytic activity. Different characterization techniques were performed, among them X-ray diffraction (XRD), Thermogravimetric analysis TGA/DTA, Spectroscopy in the Region in Fourier Transform Infrared (FTIR) and X-ray fluorescence (XRF). The effects of independent variables: temperature, molar ratio of oil: alcohol and the amount of catalyst and their interactions on the dependent variable (conversion of oleic acid to the corresponding ester). Overall, through the results obtained in the characterization was observed that the applied treatments were efficient, however the XRF technique, indicated that tungsten oxide leaching could occur during the preparation of the materials. The treatments performed on HZSM-5 caused no significant changes in the structure indicating that the zeolite was quite resistant to the treatments used. It was evaluated using complete 23 factorial design. For the catalysts investigated, the best reaction conditions were obtained when using higher levels of the independent variables temperature and amount of catalyst. However, for the variable molar ratio the lowest level showed significant yields for most of the synthesized catalyst, obtaining maximum conversion to the OC (67.97%), OW (74.37%), HZSM-5 (61.16%) OC-OW 1 (75.93%), OC-OW 2 (82.57%), OC-OW 3 (79.15%), S/OC-OW 1 (86.90%), S/OC-OW 2 (91.04%), S/OC-OW 3 (88.60%), S/OC-OW/H 1 (92.34%), S/OC-OW/H 2 (100%) and S/OC-OW/H 3 (98.16%). According to the experimental design, the temperature has the biggest influence on the reaction variable for all the synthesized catalysts. Among the catalysts investigated S/OC-OW/H 2 e S/OC-OW/H 3 were more effective. Reuse tests showed that the catalyst activity decreased after each cycle, indicating that the regeneration process was effective. The leaching test indicated that the catalysts are heterogeneous in the evaluated operating range. The catalysts investigated showed themselves promising for the production of biodiesel.

Electrochemical feasibility study of methyl parathion determination on graphite-modified basal plane pyrolytic graphite electrode

A low-cost electrochemical method was developed for the determination of trace-level of methyl parathion (MP) based on the properties of graphite-modified basal plane pyrolytic graphite electrode (graphite-bppg). A combination of graphite-bppg with square-wave voltammetric (SWV) analysis resulted in an original, sensitive and selective electrochemical method for determination of MP pesticide in drinking water. The electrode was constructed and the electrochemical behavior of MP was studied. Immobilization is achieved via film modification from dispersing graphite powder in deionized water and through pipeting a small volume onto the electrode surface allowing the solvent to volatilize. The strong affinity of the graphite modifier for the phosphorous group of the MP allowed the deposition of a significant amount of MP in less than 60 seconds. The cyclic voltammetric results indicate that the graphite-bppg electrode can enhance sensitivity in current intensity towards the quasi-reversible redox peaks of the products of the cathodic reduction of the nitro group at negative potential (peak I = 0.077 V and peak II = –0.062 V) and that the cathodic irreversible peak (peak III = –0.586 V) in comparison with bare bppg electrode and is also adsorption controlled process. Under optimized conditions, the concentration range and detection limit for MP pesticide are respectively 79.0 to 263.3 mmol L-1 and 3.00 mmol L-1. The proposed method was successfully applied to MP determination in drinking water and the performance of this electrochemical sensor has been evaluated in terms of analytical figures of merit.