Caracterização mineralógica, química e solubilização do potássio de glauconita modificada

Demand for potassium in Brazil is large and is constantly increasing, but only about 5% of all consumed potassium is produced in the country. This low domestic production implies high rate of potassium imports, leaving the country vulnerable in the event of any difficulty to import this product and currency fluctuations. The modified glauconite is a rock that has a high potential for potassium exploration, found in Minas Gerais state, its extraction is relatively cheap and the prospected rock volume is high. The difficulty for its use as a direct source of potassium is in its low solubility. Thus, the objective of this study was to perform a chemical and mineralogical characterization of the modified glauconite and evaluate the effectiveness of techniques and treatments in the potassium solubilization contained in the rock. For this study, it was used characterization techniques such as X-ray diffraction, scanning electron microscopy, diffraction by Synchrotron Light and chemical analysis of high and low power of potassium extraction. Also granulometric testing and thermal treatments with different forms of calcination were carried out. Overall, it was found that the modified glauconite is a compound of minerals, of the mica groups K-feldspar and quartz and calcination substantially alter the crystal structure of these minerals, increasing the potassium availability. While the natural solubility of glauconite modified be very low, rock calcination added with high fluxes of calcium and low magnesium content at 1200 °C led to potassium solubility increase in order of 100 times compared to that observed in the glauconite natural modified.

Caracterização, gênese e uso de latossolos sob cerrado no município de Rio Paranaíba - MG

The main objective of this research was to study the morphological, physical, chemical, mineralogical and geomorphic characteristics of two soil types in the Rio Paranaíba área of Minas Gerais. Using descriptions based on current methods, the soil profile study was carried out in two trenches both two meters in depth. The landscape of this region consists of an extensive, flat plain where the Red Yellow Latosol is found. In addition, the Dusky Red Latosol is distributed on slopes between the basin of Parana-São Francisco and the plateau. Chemical analysis show that the Red Yellow Latosol presents an extremely low natural fertility and the high amounts of gibbsite indicates a highly advanced degree of weathering for this soil. Mecanization is difficult in the Dusky Red Latosol due to the steep relief. Thus, Dusky Red Latosol could be put to better use as land for pastures and perennial crops taking the necessary care to prevent erosion. The soils were classified respectively as Typic Acrustox and Acrustox according to the Soil Survey Staff (67) and were categorized as Dystrophic Red Yellow Latosol of a clayish texture, flat relief, with clayish substratum sediments and Dystrophic Dusky Red Latosol, of clayish texture, high relief, undulant substratum, with and volcanic tuffs in agreement with the criteria proposed by Bennema and Camargo (11) for the Brasilian Classification.

Análise energética da madeira e do carvão de híbridos entre Corymbia citriodora (Hook.) K.D. Hill & L.A.S. Johnson e Corymbia torelliana (F. Muell.) K.D. Hill & L.A.S. Johnson

This research aimed to evaluate the wood and charcoal quality of hybrids clone of the crossing C. citriodora with C. torelliana in two different locations for charcoal production. Seven with 3,75 years old clones, planted at country of Itamarandiba – MG, and six 6,42 years old clones, planted in Dionísio – MG, were studied. For wood and charcoal quality analysis, samples were collected along the stem of the trees until the commercial height. Properties study of the wood was done by chemical analysis, basic density, superior heat power, and thermogravimetric analysis. The wood samples were carbonized in laboratory conditions with heating rate of 1.67 0 C.min -1 , starting at 100 0 C until 450 0 C and keeping on this temperature for 30 minutes. It were determined the carbonizations gravimetric yield, all in dry basis. The wood quality was evaluated based on the chemical immediate analysis, relative apparent density, and gross heating value. The experiment was installed according to the completely randomized design, with five repetitions. The collected data were submitted to analysis of variance and, when the evaluated effects were significant by “F” test, was applied the Scott-Knott test at 5% probability for multiple comparisons. For correlation analysis, Pearson correlation coefficient, tested by the "t" test at 5% probability was used. Results showed variability of wood between the genetic materials evaluated in relation to place and plant crossing. The thermal analysis of the wood showed significant variation between clones and it was possible to differentiate two stages of degradation (hemicelluloses and cellulose). The majority of the clones presented satisfactory properties for the charcoal production, while, clone 3, planted in Itamarandiba, obtained the best performance due it have the higher yield and energetic efficiency, thus, achieving the best potential for charcoal production. However, clone 9, planted in Dionísio, was the less indicated for charcoal production since it presented the lowest energetic efficiency, gravimetric yield, and densities.

Utilização do óleo extraído dos resíduos da filetagem de tilápia (Oreochromis niloticus) para produção de biodiesel

The aims of this study were to evaluate the potential of the oil extracted from tilapia residues filleting for biodiesel production, select the one that presents the greatest potential for this purpose and characterize the obtained biodiesel to be neutralized or refined and analyzed according to their physicochemical and yield characteristics. For this, the crude heads, carcasses and offal which have undergone physical and chemical analysis and yield were extracted. For this, the crude oil was extracted from the heads, carcasses and guts, which have passed through physicochemical and yield analysis.For the statistical analysis, a completely randomized design was used with 3 treatments (head, carcass and viscera) and 5 replications.It was observed significant differences in the oils (P <0.05) being the viscera oil the one that showed higher yield although it presented the worst values for all evaluated indices. For this reason this oil was selected for further studies. In this new stage of the study the treatments were: neutralized crude oil and viscera refined oil with different volumes of NaOH 16%.It was adopted a completely randomized design, with a 2x3 factorial (types of oil x soda volumes) with 3 replications. The analyzed variables were acid value, saponification index, peroxide value and iodine value. It was also evaluated the performance of all the obtained biodiesel. It can be concluded that: among the filleting residues oil of tilapias, the one which is more suitable for biodiesel production, due to its high yield, was the viscera oil. The use of all stages of refining is indispensable, once the obtained index and the yield were greater in the biodiesel refined oil; the produced biodiesel from tilapia’s viscera oil meets the ANP standards and, therefore, it is adequate for use.