Prior history of sexually transmitted diseases in women living with AIDS in Sao Paulo, Brazil

Objectives: To describe the epidemiological profile, risk behaviors, and the prior history of sexually transmitted diseases (STDs) in women living with acquired immunodeficiency syndrome (AIDS). Methods: Cross-sectional study, performed at the Centro de Referencia e Treinamento em DST/AIDS of Sao Paulo. The social, demographic, behavioral, and clinical data such as age, schooling, marital status, age at first sexual intercourse, number of sexual partners, parity, use of drugs, time of HIV diagnosis, CD4 count, and viral load determination were abstracted from the medical records of women living with AIDS who had gynecological consultation scheduled in the period from June 2008 to May 2009. Results: Out of 710 women who were scheduled to a gynecological consultation during the period of the study, 598 were included. Previous STD was documented for 364 (60.9%; 95% CI: 56.9%-64.8%) women. The associated factors with previous STDs and their respective risks were: human development index (HDI) <0.50 (ORaj = 5.5; 95% CI: 2.8-11.0); non-white race (ORaj = 5.2; 95% CI: 2.5-11.0); first sexual intercourse at or before 15 years of age (ORaj = 4.4; 95% CI: 2.3-8.3); HIV infection follow-up time of nine years or more (ORaj = 4.2; 95% CI: 2.3-7.8)]; number of sexual partners during the entire life between three and five partners (ORaj = 2.2; 95% CI: 1.1-4.6), and six or more sexual partners (ORaj = 3.9; 95% CI: 1.9-8.0%); being a sex worker (ORaj = 1.9; 95% CI: 1.1-3.1). Conclusions: A high prevalence of a prior history of STDs in the studied population was found. It is essential to find better ways to access HIV infection prevention, so that effective interventions can be more widely implemented. (C) 2012 Elsevier Editora Ltda. All rights reserved.

Improvement of fungal arabinofuranosidase thermal stability by reversible immobilization

A gene encoding a-L-arabinofuranosidase (abfA) from Aspergillus niveus was identified, cloned, and successfully expressed in Aspergillus nidulans. Based on amino acid sequence comparison, the 88.6 kDa enzyme could be assigned to the GH family 51. The characterization of the purified recombinant AbfA revealed that the enzyme was active at a limited pH range (pH 4.0-5.0) and an optimum temperature of 70 degrees C. The AbfA was able to hydrolyze arabinoxylan, xylan from birchwood, debranched arabinan, and 4-nitrophenyl arabinofuranoside. Synergistic reactions using both AbfA and endoxylanase were also assessed. The highest degree of synergy was obtained after the sequential treatment of the substrate with endoxylanase, followed by AbfA, which was observed to release noticeably more reducing sugars than that of either enzyme acting individually. The immobilization of AbfA was performed via ionic adsorption onto various supports: agarose activated by polyethyleneimine polymers, cyanogen bromide activated Sepharose, DEAE-Sepharose, and Sepharose-Q The Sepharose-Q derivative remained fully active at pH 5 after 360 min at 60 degrees C, whereas the free AbfA was inactivated after 60 min. A synergistic effect of arabinoxylan hydrolysis by AbfA immobilized in Sepharose-Q and endoxylanase immobilized in glyoxyl agarose was also observed. The stabilization of arabinofuranosidases using immobilization tools is a novel and interesting topic. (C) 2012 Elsevier Ltd. All rights reserved.

Two structurally discrete GH7-cellobiohydrolases compete for the same cellulosic substrate fiber

Background: Cellulose consisting of arrays of linear beta-1,4 linked glucans, is the most abundant carbon-containing polymer present in biomass. Recalcitrance of crystalline cellulose towards enzymatic degradation is widely reported and is the result of intra-and inter-molecular hydrogen bonds within and among the linear glucans. Cellobiohydrolases are enzymes that attack crystalline cellulose. Here we report on two forms of glycosyl hydrolase family 7 cellobiohydrolases common to all Aspergillii that attack Avicel, cotton cellulose and other forms of crystalline cellulose. Results: Cellobiohydrolases Cbh1 and CelD have similar catalytic domains but only Cbh1 contains a carbohydrate-binding domain (CBD) that binds to cellulose. Structural superpositioning of Cbh1 and CelD on the Talaromyces emersonii Cel7A 3-dimensional structure, identifies the typical tunnel-like catalytic active site while Cbh1 shows an additional loop that partially obstructs the substrate-fitting channel. CelD does not have a CBD and shows a four amino acid residue deletion on the tunnel-obstructing loop providing a continuous opening in the absence of a CBD. Cbh1 and CelD are catalytically functional and while specific activity against Avicel is 7.7 and 0.5 U. mg prot-1, respectively specific activity on pNPC is virtually identical. Cbh1 is slightly more stable to thermal inactivation compared to CelD and is much less sensitive to glucose inhibition suggesting that an open tunnel configuration, or absence of a CBD, alters the way the catalytic domain interacts with the substrate. Cbh1 and CelD enzyme mixtures on crystalline cellulosic substrates show a strong combinatorial effort response for mixtures where Cbh1 is present in 2: 1 or 4: 1 molar excess. When CelD was overrepresented the combinatorial effort could only be partially overcome. CelD appears to bind and hydrolyze only loose cellulosic chains while Cbh1 is capable of opening new cellulosic substrate molecules away from the cellulosic fiber. Conclusion: Cellobiohydrolases both with and without a CBD occur in most fungal genomes where both enzymes are secreted, and likely participate in cellulose degradation. The fact that only Cbh1 binds to the substrate and in combination with CelD exhibits strong synergy only when Cbh1 is present in excess, suggests that Cbh1 unties enough chains from cellulose fibers, thus enabling processive access of CelD.

Comparative study of classic friction among different archwire ligation systems

OBJECTIVE: To describe and compare three alternative methods for controlling classical friction: Self-ligating brackets (SLB), special brackets (SB) and special elastomeric ligatures (SEB). METHODS: The study compared Damon MX, Smart Clip, In-Ovation and Easy Clip self-ligating bracket systems, the special Synergy brackets and Morelli's twin bracket with special 8-shaped elastomeric ligatures. New and used Morelli brackets with new and used elastomeric ligatures were used as control. All brackets had 0.022 x 0.028-in slots. 0.014-in nickel-titanium and stainless steel 0.019 x 0.025-in wires were tied to first premolar steel brackets using each archwire ligation method and pulled by an Instron machine at a speed of 0.5 mm/minute. Prior to the mechanical tests the absence of binding in the device was ruled out. Statistical analysis consisted of the Kruskal-Wallis test and multiple non-parametric analyses at a 1% significance level. RESULTS: When a 0.014-in archwire was employed, all ligation methods exhibited classical friction forces close to zero, except Morelli brackets with new and old elastomeric ligatures, which displayed 64 and 44 centiNewtons, respectively. When a 0.019 x 0.025-in archwire was employed, all ligation methods exhibited values close to zero, except the In-Ovation brackets, which yielded 45 cN, and the Morelli brackets with new and old elastomeric ligatures, which displayed 82 and 49 centiNewtons, respectively. CONCLUSIONS: Damon MX, Easy Clip, Smart Clip, Synergy bracket systems and 8-shaped ligatures proved to be equally effective alternatives for controlling classical friction using 0.014-in nickel-titanium archwires and 0.019 x 0.025-in steel archwires, while the In-Ovation was efficient with 0.014-in archwires but with 0.019 x 0.025-in archwires it exhibited friction that was similar to conventional brackets with used elastomeric ligatures.

Ensino de Arquitetura e Urbanismo com auxilio de ferramentas digitais

Este texto pretende discutir a importância do desenho à mão livre no processo projetivo arquitetônico inserido no contexto da era digital, por meio do uso das mesas digitais, comumente chamadas de tablets. A relevância desta discussão consiste em identificar como os desenhos feitos com tablets mantêm a percepção e o traço individual de cada pessoa. Pretende-se, com isto, não apenas rever e atualizar as disciplinas de desenho nos cursos de arquitetura, suas práticas e seus procedimentos, mas também, discutir o papel da linguagem e representação – analógica ou digital – e sua integração com outras disciplinas. São apresentadas algumas considerações sobre o uso dessa ferramenta nas seguintes disciplinas: História da Arquitetura e Urbanismo, Paisagismo e Projeto, ministradas no Instituto de Arquitetura e Urbanismo da Universidade de São Paulo, Brasil. As tablets são apresentadas como um meio de conexão entre o projeto analógico e digital, capazes de capturar a pressão e a velocidade do traço, aproximando a potencialidade e racionalidade do processo feito no computador com o gesto criativo do desenho à mão livre, resultando em uma sinergia entre essas duas linguagens.