Impact of bleaching pine fibre on the fibre/cement interface

The goal of this article was to evaluate the surface characteristics of the pine fibres and its impact on the performance of fibre-cement composites. Lower polar contribution of the surface energy indicates that unbleached fibres have less hydrophilic nature than the bleached fibres. Bleaching the pulp makes the fibres less stronger, more fibrillated and permeable to liquids due to removal the amorphous lignin and its extraction from the fibre surface. Atomic force microscopy reveals these changes occurring on the fibre surface and contributes to understanding the mechanism of adhesion of the resulting fibre to cement interface. Scanning electron microscopy shows that pulp bleaching increased fibre/cement interfacial bonding, whilst unbleached fibres were less susceptible to cement precipitation into the fibre cavities (lumens) in the prepared composites. Consequently, bleached fibre-reinforced composites had lower ductility due to the high interfacial adhesion between the fibre and the cement and elevated rates of fibre mineralization.

Sardinian goat's milk as source of bacteriocinogenic potential protective cultures

Goat breeding in Sardinia constitutes an important source of income for farming and shepherding activities. In this study 170 LAB strains were isolated from Sardinian goat's milk and tested for bacteriocins production against several food-borne pathogenic microorganisms. Four isolates (SD1, SD2, SD3 and SD4) were selected for their effective inhibition on Listeria monocytogenes. The strains were classified as members of Enterococcus genus, according to their biochemical and physiological characteristics, and then genetically identified as Enterococcus faecium. In MRS broth at 37 degrees C, bacteriocins SD1 and SD2 were produced at much higher levels (51200 AU/ml) compared to bacteriocin SD3 (3200 AU/ml) and bacteriocin SD4 (800 AU/ml). Their peptides were inactivated by proteolytic enzymes, but not when treated with alpha-amylase, catalase and lipase. The four bacteriocins remained stable at pH from 2.0 to 12.0, after exposure to 100 degrees C for 120 min and were not affected by the presence of surfactants and salts (N-Laourylsarcosine, NaCl, SDS, Triton X-100, Tween 20, Tween 80 and urea). Their molecular size was determined to be approximately 5 kDa by tricine-SDS-PAGE. Since the strains exhibited a strong antimicrobial activity against 21 L monocytogenes strains and 6 Salmonella spp. isolates, they should be considered as potential bio-preservatives cultures for fermented food productions. Moreover, due to their technological features, the four strains could be taken in account for using as adjunct NSLAB (non-starter lactic acid bacteria) rather than as starter culture. (C) 2011 Elsevier Ltd. All rights reserved.

Intestinal IgG uptake by small intestine of goat kid fed goat or lyophilized bovine colostrum

The immunoglobulin G (IgG) uptake and enterocyte nucleus position in the villous were studied in newborn goat kids fed goat or lyophilized bovine colostrum. Two groups of 15 newborn goat kids, each received 5% of body weight of goat colostrum (GC) or lyophilized bovine colostrum (LBC) containing 55 mg/mL of immunoglobulin G (IgG) at 0, 7 and 14 h of life. Three animals were sampled just after birth, receiving no colostrum intake, to be used as control. Samples of duodenum, medium jejunum and ileum were collected at 0, 18, 36 and 96 h of life. IgG vacuoles were not observed in the duodenum throughout the experiment regardless of all the experimental time points. In this segment, at 0, 18 and 36 h of life, nuclei were found in the apical, medial and basal positions in the enterocytes, and localized in the upper, medial and lower parts in the villous, respectively. At 96 h, a basal nuclei position was observed in the enterocytes, throughout the villous. In jejunum, IgG vacuoles were distributed along the villous at 18 and 36 h. In this segment at Oh the nuclei were positioned predominantly apically in the enterocytes, throughout the villous. At 18 and 36 h, no consistent nuclei pattern was verified: however at 96 h, the nuclei were positioned basally in the enterocytes, throughout the jejunal villous. In the ileum at 0, 18 and 36 h, a great number of vacuoles without IgG were verified in the medial-apical part of the villous. In this segment, at Oh of life and 96 h of life, the predominance of basal nuclei was observed. Nuclei were positioned in medial-apically part of the ileal enterocytes in the upper part of the villous at 18 and 36 h. It was found that the jejunal epithelium was the most important segment related to absorption process. The IgG absorption and nucleus position in the newborn goats were dependent on the small intestine segments and experimental time points, regardless of the colostrum source. GC or LCB. Considering the IgG uptake mechanism observed in the present study, the lyophilized bovine colostrum might be used instead of goat colostrum. (C) 2011 Elsevier B.V. All rights reserved.

Lyophilized bovine colostrum as a source of immunoglobulins and insulin-like growth factor for newborn goat kids

The objective of this study was to evaluate lyophilized bovine colostrum as an alternative source of passive immunity and insulin like growth factor I (IGF-I) for goat kids, considering newborns consuming non-maternal colostrum. Twenty-nine male newborns received 5% of body weight of lyophilized bovine (LBC) or goat colostrum (GC), both with 55 mg/mL of IgG, at 0, 7 and 14 h of life. Blood samples were collected at 0, 7, 14, 18, 24, 36, 48, 72 and 96 h of life to determine serum IgG, total protein (TP), IGF-I and apparent efficiency of IgG absorption at 7, 14, 18 and 24 h (AEA(7hr), AEA(14hr), AEA(18hr), AEA(total), respectively). In LBC, the values of serum IgG at 14, 18,24 and 48 h (13.1, 13.4, 14.1 and 14.6 mg/mL, respectively) were higher than the values at 0 and 7 h (0.04 and 6.9 mg/mL, respectively). In GC, the serum IgG at 18 h (9.3 mg/mL) was higher than the value at 7 h (5.5 mg/mL). AEA(7hr) and AEA(14hr) in LBC were the same (19.2 and 18.5%, respectively, P>0.05) and the values of AEA(18hr) and AEA(total), 9.3 and 9.5%, respectively, were equal and smaller than AEA(7hr), and AEA(14hr). In GC, AEA(7hr), 20.8%, was higher than AEA(14hr), 16.1% (P<0.05) and AEA(18hr), and AEA(total), 9.2 and 8.0%, respectively, were equal and smaller than AEA(7hr) and AEA(14hr). The serum TP and IGF-I were not affected by colostrum feeding. Considering the variables study in the present work, lyophilized bovine colostrum constitutes a promising alternative substitute to goat colostrum in newborn goat kids, since the supply of immunoglobulins and IGF-I was suitable for the kids. (c) 2012 Elsevier B.V. All rights reserved.

On the Milnor fibre and L numbers of semi-weighted homogeneous arrangements

Inthispaperwestudygermsofpolynomialsformedbytheproductofsemi-weighted homogeneous polynomials of the same type, which we call semi-weighted homogeneous arrangements. It is shown how the L numbers of such polynomials are computed using only their weights and degree of homogeneity. A key point of the main theorem is to find the number called polar ratio of this polynomial class. An important consequence is the description of the Euler characteristic of the Milnor fibre of such arrangements only depending on their weights and degree of homogeneity. The constancy of the L numbers in families formed by such arrangements is shown, with the deformed terms having weighted degree greater than the weighted degree of the initial germ. Moreover, using the results of Massey applied to families of function germs, we obtain the constancy of the homology of the Milnor fibre in this family of semi-weighted homogeneous arrangements.

Goat kids' intestinal absorptive mucosa in period of passive immunity acquisition

Colostrum intake in newborn goat kids is essential for the acquisition of immunoglobulins (Ig) and influencing development of gastrointestinal mucosa. The present study investigated small intestine structure in the postnatal goat kid fed lyophilized bovine colostrum, an alternative source of antibodies to small ruminants, or goat colostrum using scanning electron microscopy technique. At 0,7 and 14 h of life 15 male newborns received 5% of body weight of lyophilized bovine colostrum (LBC) and 14 goat colostrum (GC), both with 55 mg/mL of IgG. Samples of duodenum, medium jejunum and ileum were collected at 18, 36 and 96 h of life. Three animals were sampled at birth without colostrum intake (0 h). The enteric tissues were analyzed for villi density (villi/cm(2)) and morphological characteristics. The villi density did not differ between treatment, sampling time and intestinal segments (P>0.05). The morphological characteristics were not different between LBC and GC in all segments. Duodenal villi were fingerlike, thick and short, and with different heights. Duodenal folds could also be verified. Frequent anastomoses in all sampling times were observed in this segment. In the jejunum, fingerlike villi, thin and thick, of different heights were observed in all sampling times as well as leaf-shaped villi. Vacuoles with colostrum were observed in the jejunum of goats sampled at 18 h of life. In ileum, fingerlike villi were observed in all sampling times. At 0 and 96 h of life, thick and low villi were verified while at 18 and 36 h the villi showed different heights and widths. At all sampling times, regularly cell extrusion processes were observed with grouped cells at the apex of the ileum villi and with isolated cells along the villi. In the first 4 days of goat kids' life the small intestine structure was unaffected by different sources of colostrum, goat or lyophilized bovine, and by the replacement of fetal enterocytes, which are able to absorb macromolecules, by adult-type ones. (C) 2011 Elsevier B.V. All rights reserved.

Evaluation of the flexural strength and elastic modulus of resins used for temporary restorations reinforced with particulate glass fibre

Objective: The flexural strength and the elastic modulus of acrylic resins, Dencor, Duralay and Trim Plus II, were evaluated with and without the addition of silanised glass fibre. Materials and methods: To evaluate the flexural strength and elastic modulus, 60 test specimens were fabricated with the addition of 10% ground silanised glass fibres for the experimental group, and 60 without the incorporation of fibres, for the control group, with 20 test specimens being made of each commercial brand of resin (Dencor, Duralay and Trim Plus II) for the control group and experimental group. After the test specimens had been completed, the flexural strength and elastic modulus tests were performed in a universal testing device, using the three-point bending test. For the specimens without fibres the One-Way Analysis of Variance and the complementary Tukey test were used, and for those with fibres it was not normal, so that the non-parametric Mann-Whitney test was applied. Results: For the flexural strength test, there was no statistical difference (p > 0.05) between each commercial brand of resin without fibres [Duralay 84.32(+/- 8.54), Trim plus 85.39(+/- 6.74), Dencor 96.70(+/- 6.52)] and with fibres (Duralay 87.18, Trim plus 88.33, Dencor 98.10). However, for the elastic modulus, there was statistical difference (p > 0.01) between each commercial brand of resin without fibres [Duralay 2380.64 (+/- 168.60), Trim plus 2740.37(+/- 311.74), Dencor 2595.42(+/- 261.22)] and with fibres (Duralay 3750.42, Trim plus 3188.80, Dencor 3400.75). Conclusion: The result showed that the incorporation of fibre did not interfere in the flexural strength values, but it increased the values for the elastic modulus.

Evaluation of Vickers hardness of different types of acrylic denture base resins with and without glass fibre reinforcement

Objective: To evaluate the Vickers hardness of different acrylic resins for denture bases with and without the addition of glass fibres. Background: It has been suggested that different polymerisation methods, as well as the addition of glass fibre (FV) might improve the hardness of acrylic. Materials and methods: Five types of acrylic resin were tested: Vipi Wave (VW), microwave polymerisation; Vipi Flash (VF), auto-polymerisation; Lucitone (LT), QC20 (QC) and Vipi Cril (VC), conventional heat-polymerisation, all with or without glass fibre reinforcement (GFR) and distributed into 10 groups (n = 12). Specimens were then submitted to Vickers hardness testing with a 25-g load for 30 s. All data were submitted to ANOVA and Tukey's HSD test. Results: A significant statistical difference was observed with regard to the polymerisation method and the GFR (p < 0.05). Without the GFR, the acrylic resin VC presented the highest hardness values, and VF and LT presented the lowest. In the presence of GFR, VC resin still presented the highest Vickers hardness values, and VF and QC presented the lowest. Conclusions: The acrylic resin VC and VW presented higher hardness values than VF and QC resins. Moreover, GFR increased the Vickers hardness of resins VW, VC and LT.

Enzyme activity in the small intestine of goat kids during the period of passive immunity acquisition

Enzyme activity of protein and carbohydrate degradation in small intestinal mucosa was investigated in goat kids fed with lyophilized bovine and goat colostrum. At 0,7 and 14 h of life 15 male newborns received 5% of body weight of lyophilized bovine colostrum and 14 goat colostrum, both with 55 mg/mL of IgG. Duodenum, jejunum and ileum samples were collected at 18,36 and 96 h of life. Three animals were sampled at birth, without colostrum intake. Activity of aminopeptidase N and A, dipeptidil peptidase IV, lactase, maltase and sucrase was determined as one international unit per gram of tissue. Intracellular enzymatic activity of acid phosphatase was observed by histochemistry in tissue section. Only the activity of aminopeptidase A in the ileum was affected by treatment, with a greater value for LBC than for GC (P < 0.05). The aminopeptidase N activity was the highest at 36 h in the duodenum (P < 0.05) and lowest at 96 h in the jejunum (P < 0.05). Dipeptidil peptidase IV activity was highest at 36 h in the duodenum (P < 0.05), lowest at 96 h in the jejunum (P < 0.05) and higher at 36 h than at 96 h in the ileum (P < 0.05). Aminopeptidase A activity in the ileum was highest at 36 h (P < 0.05), followed by 18 and 96 h of life (P < 0.05). Lactase activity in the duodenum increased from 18 to 36 h and from 36 to 96 h in the jejunum (P < 0.05). Maltase activity increased only in the duodenum from 18 to 96 h (P < 0.05). Sucrase activity in the jejunum decreased from 18 to 36 h and from 36 to 96 h in the ileum (P < 0.05). At birth, activity of most enzymes was similar to that at later times (P < 0.05). Histochemistry analyses showed a higher frequency of lysosomes with acid phosphatase activity in the duodenum, especially at 36 h of life. In the jejunum, the presence of lysosomes with acid phosphatase activity was the highest at 96 h, followed by 36 and 18 h of life. In the ileum, all samples showed low presence of lysosomes with acid phosphatase activity. These results indicate that lyophilized bovine colostrum, as a heterologous source of antibodies or nutrients, is a possible alternative management tool for goats. The present work also suggests that in the first 4 days of life, enzyme activity in the intestinal epithelium of goats is still not fully stimulated, which is an important characteristic for these animals that depend on macromolecule absorption to acquire passive protection after birth. (C) 2012 Elsevier B.V. All rights reserved.

Development of corn and flaxseed snacks with high-fibre content using response surface methodology (RSM)

With the increasing emphasis on health and well-being, nutrition aspects need to be incorporated as a dimension of product development. Thus, the production of a high-fibre content snack food from a mixture of corn and flaxseed flours was optimized by response surface methodology. The independent variables considered in this study were: feed moisture, process temperature and flaxseed flour addition, as they were found to significantly impact the resultant product. These variables were studied according to a rotatable composite design matrix (-1.68, -1, 0, 1, 1.68). Response variable was the expansion ratio since it has been highly correlated with acceptability. The optimum corn-flaxseed snack obtained presented a sevenfold increase in dietary fibre, almost 100% increase in protein content compared to the pure corn snack, and yielded an acceptability score of 6.93. This acceptability score was similar to those observed for corn snack brands in the market, indicating the potential commercial use of this new product, which can help to increase the daily consumption of dietary fibre.

Growth, carcass characteristics, chemical composition and fatty acid profile of the longissimus dorsi muscle in goat kids fed diets with castor oil

The objective in this study was to determine growth, carcass characteristics, chemical composition and fatty acid profile of the longissimus dorsi of crossbred Boer x Saanen kids fed castor oil. Twenty-four kids (12 males and 12 females) were assigned in a randomized complete block design with two treatments and twelve replications. Blocks were defined according to weight, gender and initial age of animals for the evaluation of performance. The experimental treatments consisted of two diets containing 900 g concentrate/kg: a control diet (without addition of oil) and another containing castor oil at 30 g/kg (on a dry matter basis). After they reached an average body weight of 25 kg, males were slaughtered for the evaluation of carcass characteristics, chemical composition and fatty acid profile of the longissimus dorsi muscle. The addition of castor oil in the diet did not affect the intake of dry matter, crude protein and neutral detergent fiber; the average daily gain; and feed conversion, but increased the ether extract intake. No difference was observed for the carcass characteristics, chemical composition of the meat, concentration of C18:2 cis-9, trans-11 (CLA) and total concentration of saturated, monounsaturated and polyunsaturated fatty acids and their relations; however, there was increase in the concentrations of C18:2 trans-10, cis-12 (CLA) and C20:4 omega-6. The addition of castor oil to the diet of crossbred Boer x Saanen kids containing a high content of concentrate did not promote benefit to the characteristics evaluated.

Parametric Analysis of Effective Material Properties of Thickness-Shear Piezoelectric Macro-Fibre Composites

A previous study on the characterization of effective material properties of a d(15) thickness-shear piezoelectric Macro-Fibre Composite (MFC) made of seven layers (Kapton, Acrylic, Electrode, Piezoceramic Fibre and Epoxy Composite, Electrode, Acrylic, Kapton) using a finite element homogenization method has shown that the packaging reduces significantly the shear stiffness of the piezoceramic material and, thus, leads to significantly smaller effective electromechanical coupling coefficient k(15) and piezoelectric stress constant e(15) when compared to the piezoceramic fibre properties. Therefore, the main objective of this work is to perform a parametric analysis in which the effect of the variations of fibre volume fraction, Epoxy elastic modulus, electrode thickness and active layer thickness on the MFC effective material properties is evaluated. Results indicate that an effective d(15) MFC should use relatively thick fibres having relatively high shear modulus and relatively stiff epoxy filler. On the other hand, the electrode thickness does not affect significantly the MFC performance.

Effect of 2% chlorhexidine digluconate on bond strength of a glass-fibre post to root dentine

Aim: To assess the immediate influence of dentine bonding systems (DBS) associated with 2% chlorhexidine digluconate (CHX) on glass-fibre post-bond strength to root dentine, in terms of coronal, middle and apical thirds. Methodology: Sixty bovine roots were root filled and randomly assigned to 1 of 6 groups (n = 10): SBMP (3-step etch-and-rinse system, Scotchbond Multi-Purpose), SB (2-step etch-and-rinse system, Single Bond 2), SE (2-step self-etching system, Clearfil SE Bond) and SBMP-CHX, SB-CHX and SE-CHX, respectively, associated with CHX. For all groups, a glassfibre post was luted with a dual-cure resin cement, RelyX ARC. After 7-day storage, specimens were subjected to the push-out test. Failure modes were analysed under optical microscopy (40x). Bond strength values were statistically analysed by two-way ANOVA and Bonferroni tests (P < 0.05). Results: The effect of DBS was significant (P < 0.05), and SE reached higher bond strength in comparison with the other DBS tested. CHX association did not show improvement with any DBS (P > 0.05); rather, it negatively affected SE, which was detected for all thirds. There was no difference between thirds (P > 0.05), except for the SE-CHX, which presented lower values for the apical third (P < 0.05). Adhesive cement/dentine adhesive failure was predominant for all groups. CHX did not influence the failure mode for any DBS (P > 0.05). Conclusions: The performance of the dentine bonding systems was material dependent. CHX did not improve immediate bond strength; however, CHX negatively affected the bond strength of the self-etching system, especially in the third apical

Density and rheological parameters of goat milk

The rheological behavior and density of goat milk was studied as a function of solids concentration (10.5 to 50.0%) and temperature (273 to 331 k). Newtonian behavior was observed for values of total solids (TS) between 10.5 and 22.0% and temperatures from 276 to 331 k changing to pseudoplastic behavior without yield stress for TS from 25.0 to 39.4% at the same range of temperature. Goat milk with TS between 44.3 to 50.0% and temperatures of 273 to 296 k showed yield stress in addition to pseudoplastic behavior. At 303 to 331 k the power law model was observed again, without yield stress. The density of goat milk ranged from 991.7 to 1232.4 kg.m-3.

Parametric analysis of effective material properties of thickness-shear piezoelectric macro-fibre composites

A previous study on the characterization of effective material properties of a d15 thickness-shear piezoelectric Macro-Fibre Composite (MFC) made of seven layers (Kapton, Acrylic, Electrode, Piezoceramic Fibre and Epoxy Composite, Electrode, Acrylic, Kapton) using a finite element homogenization method has shown that the packaging reduces significantly the shear stiffness of the piezoceramic material and, thus, leads to significantly smaller effective electromechanical coupling coefficient k15 and piezoelectric stress constant e15 when compared to the piezoceramic fibre properties. Therefore, the main objective of this work is to perform a parametric analysis in which the effect of the variations of fibre volume fraction, Epoxy elastic modulus, electrode thickness and active layer thickness on the MFC effective material properties is evaluated. Results indicate that an effective d15 MFC should use relatively thick fibres having relatively high shear modulus and relatively stiff epoxy filler. On the other hand, the electrode thickness does not affect significantly the MFC performance.