Fracture and resistance-curve behavior in hybrid natural fiber and polypropylene fiber reinforced composites

This article presents the results of a combined experimental and theoretical study of fracture and resistance-curve behavior of hybrid natural fiber- and synthetic polymer fiber-reinforced composites that are being developed for potential applications in affordable housing. Fracture and resistance-curve behavior are studied using single-edge notched bend specimens. The sisal fibers used were examined using atomic force microscopy for fiber bundle structures. The underlying crack/microstructure interactions and fracture mechanisms are elucidated via in situ optical microscopy and ex-situ environmental scanning microscopy techniques. The observed crack bridging mechanisms are modeled using small and large scale bridging concepts. The implications of the results are then discussed for the design of eco-friendly building materials that are reinforced with natural and polypropylene fibers.

Does the casting mode influence microstructure, fracture and properties of different metal ceramic alloys?

The aim of the present study was to evaluate the tensile strength, elongation, microhardness, microstructure and fracture pattern of various metal ceramic alloys cast under different casting conditions. Two Ni-Cr alloys, Co-Cr and Pd-Ag were used. The casting conditions were as follows: electromagnetic induction under argon atmosphere, vacuum, using blowtorch without atmosphere control. For each condition, 16 specimens, each measuring 25 mm long and 2.5 mm in diameter, were obtained. Ultimate tensile strength (UTS) and elongation (EL) tests were performed using a Kratos machine. Vickers Microhardness (VM), fracture mode and microstructure were analyzed by SEM. UTS, EL and VM data were statistically analyzed using ANOVA. For UTS, alloy composition had a direct influence on casting condition of alloys (Wiron 99 and Remanium CD), with higher values shown when cast with Flame/Air (p < 0.05). The factors "alloy" and "casting condition" influenced the EL and VM results, generally presenting opposite results, i.e., alloy with high elongation value had lower hardness (Wiron 99), and casting condition with the lowest EL values had the highest VM values (blowtorch). Both factors had significant influence on the properties evaluated, and prosthetic laboratories should select the appropriate casting method for each alloy composition to obtain the desired property.

Probabilistic crack growth analyses using a boundary element model: Applications in linear elastic fracture and fatigue problems

This paper addresses the numerical solution of random crack propagation problems using the coupling boundary element method (BEM) and reliability algorithms. Crack propagation phenomenon is efficiently modelled using BEM, due to its mesh reduction features. The BEM model is based on the dual BEM formulation, in which singular and hyper-singular integral equations are adopted to construct the system of algebraic equations. Two reliability algorithms are coupled with BEM model. The first is the well known response surface method, in which local, adaptive polynomial approximations of the mechanical response are constructed in search of the design point. Different experiment designs and adaptive schemes are considered. The alternative approach direct coupling, in which the limit state function remains implicit and its gradients are calculated directly from the numerical mechanical response, is also considered. The performance of both coupling methods is compared in application to some crack propagation problems. The investigation shows that direct coupling scheme converged for all problems studied, irrespective of the problem nonlinearity. The computational cost of direct coupling has shown to be a fraction of the cost of response surface solutions, regardless of experiment design or adaptive scheme considered. (C) 2012 Elsevier Ltd. All rights reserved.

Use of Large-volume Cone-Beam Computed Tomography in Identification and Localization of Horizontal Root Fracture in the Presence and Absence of Intracanal Metallic Post

Introduction: The objective of the study was to evaluate the ability of large-volume cone-beam computed tomography (CBCT) to detect horizontal root fracture and to test the influence of a metallic post. Methods: Through the examination of 40 teeth by large-volume CBCT (20-cm height and 15-cm diameter cylinder) at 0.2-mm voxel resolution, 2 observers analyzed the samples for the presence and localization of horizontal root fracture. Results: The values of accuracy in the groups that had no metallic post ranged from 33%-68%, whereas for the samples with the metallic post, values showed a wide variation (38%-83%). Intraobserver agreement showed no statistically significant difference between the groups with/without metallic post; both ranged from very weak to weak (kappa, 0.09-0.369). Conclusions: The low accuracy and low intraobserver and interobserver agreement reflect the difficulty in performing an adequate diagnosis of horizontal root fractures through a large-volume CBCT by using a small voxel reconstruction. (J Endod 2012;38:856-859)

Topography of four different endodontic rotary systems, before and after being used for the 12th time

Root canal preparation may damage NiTi instruments resulting in wear and deformation. The aim of this study was to make a comparative evaluation of the surface topography of the cervical third of four different rotary systems, before and after being used twelve times, in 1.440 resin blocks with simulated root canals with standardized 45 degrees curvatures, and analyzed by atomic force microscopy AFM. The blocks were divided into four groups and prepared according to the manufacturers recommendations: Group 1 - K3 (R); Group 2 - Protaper Universal (R); Group 3 - Twisted Files (R) and Group 4 - Biorace (R). After each preparation, the instruments were washed and autoclaved. A total of 240 instruments were selected, being 30 new instruments and 30 after having been used for the 12th time, from each group. These instruments were analyzed by AFM and for quantitative evaluation, the mean RMS (Root mean square) values of the cervical third of the specimens from the four groups were used. The result showed that all the rotary files used for the 12th time suffered wear with change in the topography of the cervical region of the active portion of the file (ANOVA p < 0.01). Classifying the specimens in increasing order, from the least to the greatest wear suffered, Group 3 (2.8993 nm) presented the least wear, followed by Group 4 (12.2520 nm), Group 1 (36.0043 nm) and lastly, Group 2 (59.8750 nm) with the largest amount of cervical surface wear. Microsc. Res. Tech. 75:97-102, 2012. (c) 2011 Wiley Periodicals, Inc.

Chemistry and Chemical Education Through Text and Image: Analysis of Twentieth Century Textbooks Used in Brazilian Context

Assuming that textbooks give literary expression to cultural and ideological values of a nation or group, we propose the analysis of chemistry textbooks used in Brazilian universities throughout the twentieth century. We analyzed iconographic and textual aspects of 31 textbooks which had significant diffusion in the context of Brazilian universities at that period. As a result of the iconographic analysis, nine categories of images were proposed: (1) laboratory and experimentation, (2) industry and production, (3) graphs and diagrams, (4) illustrations related to daily life, (5) models, (6) illustrations related to the history of science, (7) pictures or diagrams of animal, vegetable or mineral samples, (8) analogies and (9) concepts of physics. The distribution of images among the categories showed a different emphasis in the presentation of chemical content due to a commitment to different conceptions of chemistry over the period. So, we started with chemistry as an experimental science in the early twentieth century, with an emphasis change to the principles of chemistry from the 1950s, culminating in a chemistry of undeniable technological influence. Results showed that reflections not only on the history of science, but on the history of science education, may be useful for the improvement of science education.

Effects of neonatal castration and androgenization on sexual dimorphism in bone, leptin and corticosterone secretion

This study investigated the role of neonatal sex steroids in rats on sexual dimorphism in bone, as well as on leptin and corticosterone concentrations throughout the lifespan. Castration of males and androgenization of females were used as models to investigate the role of sex steroids shortly after birth. Newborn Wistar rats were divided into four groups, two male groups and two female groups. Male pups were cryoanesthetized and submitted to castration or sham-operation procedures within 24 h after birth. Female pups received a subcutaneous dose of testosterone propionate (100 mu g) or vehicle. Rats were euthanized at 20, 40, or 120 postnatal days. Body weight was also measured at 20, 40, and 120 days of age, and blood samples and femurs were collected. The length and thickness of the femurs were measured and the areal bone mineral density (areal BMD) was determined by dual-energy X-ray absorptiometry (DEXA). Biomechanical three-point bending testing was used to evaluate bone breaking strength, energy to fracture, and extrinsic stiffness. Blood samples were submitted to a biochemical assay to estimate calcium, phosphorus, alkaline phosphatase, leptin, and corticosterone levels. Weight gain, areal BMD and bone biomechanical properties increased rapidly with respect to age in all groups. In control animals, skeletal sexual dimorphism, leptin concentration, and dimorphic corticosterone concentration patterns were evident after puberty. However, androgen treatment induced changes in growth, areal BMD, and bone mass properties in neonatal animals. In addition, neonatally-castrated males had bone development and mechanical properties similar to those of control females. These results suggest that the exposure to neonatal androgens may represent at least one covariate that mediates dimorphic variation in leptin and corticosterone secretions. The study indicates that manipulation of the androgen environment during the critical period of sexual differentiation of the brain causes long-lasting changes in bone development, as well as serum leptin and corticosterone concentrations. In addition, this study provides useful models for the investigation of bone disorders induced by hypothalamic hypogonadism. (C) 2011 Elsevier Inc. All rights reserved.

Atividade de comunicação e de trabalho

Este artigo discute o binômio comunicação e trabalho a partir da perspectiva da ergologia, ou seja, da atividade humana. Faz uma breve retrospectiva das teorias de comunicação, analisando como as correntes teóricas hegemônicas vêem de maneira limitada os processos de comunicação. E discute sobre os conceitos de comunicação e de trabalho, propondo uma abordagem de pesquisa que permita melhor compreender esse binômio.

CARING FOR TUBERCULOSIS PATIENTS IN THE FAMILY HEALTH STRATEGY: THE NURSES' PERCEPTIONS

The objective of this study was to analyze the nurses' perceptions regarding tuberculosis control, according to the theoretical axis of comprehensive healthcare and the concepts of attachment and teamwork. This qualitative study involved 13 nurses from the Family Health Strategy of a priority city in the metropolitan region of Joao Pessoa, Paraiba, Brazil. Data were collected in focal groups and subjected to thematic content analysis. Factors that strengthen tuberculosis control were: supervised treatment, free medication and the provision of supplies. Weakening factors were: worker's turnover, the lack of encouragement for patients and incipient educational actions. The factors that, according to the nurses, weaken tuberculosis patient care should be reviewed by administrators, workers, users and educators with a view to redefining healthcare activities that strengthen attachment, comprehensive healthcare and teamwork.

PHOTOELASTIC ANALISYS IN THE LOWER REGION OF VERTEBRAL BODY L4

Objective: To analyze the shear forces on the vertebral body L4 when submitted to a compression force by means of transmission photoelasticity. Methods: Twelve photoelastic models were divided into three groups, with four models per group, according to the positioning of the sagittal section vertebrae L4-L5 (sections A, B and C). The simulation was performed using a 15N compression force, and the fringe orders were evaluated in the vertebral body L4 by the Tardy compensation method. Results: Photoelastic analysis showed, in general, a homogeneous distribution in the vertebral bodies. The shear forces were higher in section C than B, and higher in B than A. Conclusion: The posterior area of L4, mainly in section C, showed higher shear concentrations, corresponding to a more susceptible area for bone fracture and spondylolisthesis. Economic and Decision Analyses Development of an Economic or Decision Model. Level I

Ultrasonic sensor for the presence of oily contaminants in water

The determination of the complex reflection coefficient of ultrasonic shear-waves at the solid-liquid interface is a technique employed for the measurement of the viscoelastic properties of liquids. An interesting property of the measurement technique is the very small penetration depth of the shear-waves into the liquid sample, which permits measurements with liquid films of some micrometers thick. This property, along with the adhesion of oily substances to surfaces, can be used for the detection of oily contaminants in water. In this work, the employment of the ultrasonic shear-wave reflection technique to the detection of oily contaminants in water is proposed and the theoretical and experimental concepts involved are discussed. Preliminary experimental results show the measurement technique can detect SAE 40 automotive oil in water in volume proportions less than 0.5%.

Do Staurozoa bloom? A review of stauromedusan population biology

The study of "jellyfish blooms" provides important data toward determining the causes and consequences of these phenomena; however, the definition of "bloom" remains controversial and different concepts have been adopted in recent works. By addressing the biological and convenience definitions, this study tested the adequacy of the different concepts of "blooms" for the Class Staurozoa (Cnidaria). From seasonal monitoring data of some species of Staurozoa, we concluded that stauromedusae bloom if we used the biological concept of "bloom", which considers the life cycle and resulting changes in the abundances of these animals. By contrast, the small, benthic, inconspicuous, and non-harmful stauromedusae do not bloom if we use the convenience concept of "bloom", which constrains the events to those that humans can observe and that cause damage to human activities. In other words, the same group of organisms either is or is not capable of blooming depending on which concept of "bloom" is used. In fact, previous literature has suggested that Staurozoa could not bloom, which indicates that the study of "jellyfish blooms" can be biased, considering convenience rather than biological reasoning.

Effects of daily intake of zidovudine-stavudine on rat pregnancy outcome: biological essay

Purpose: To evaluate the effects at term of a highly active antiretroviral drug association when administered for the whole period of rat pregnancy. Methods: Forty pregnant rats weighing about 200 g were randomly divided into four groups: a control group (Ctr = drug vehicle control, n = 10) and three experimental groups. which were treated with an oral solution of zidovudine-stavudine (Exp1x = 10/1 mg/kg b.w., n = 10; Exp3x = 30/3 mg/kg b.w., n = 10; Exp9x = 90/9 mg/kg b.w., n = 10) from "day 0" up to the 20th day of pregnancy. Maternal body weights were recorded at the start of the experiment and on the 7th, 14th and 20th day thereafter. At term (20th day) the rats were anesthetized and submitted to hysterotomy. Implantations, reabsorptions, living fetuses, placentae and intrauterine deaths were looked for and recorded. The collected fetuses and placentae were weighed and the concepts were examined by a stereoscopic microscope looking for external malformations. Results: No significant alterations due to the antiretroviral drug treatment could be detected regarding the number of implantations, fetuses, placentae, absorptions and malformations nor regarding maternal and fetal mortality. Conclusions: Administration of the association zidovudine/stavudine for the whole period of rat pregnancy did not interfere with the maternal, fetal and placental weight gain as well as abnormalities detectable by the employed methodology.

Using Prior Information from the Medical Literature in GWAS of Oral Cancer Identifies Novel Susceptibility Variant on Chromosome 4-the AdAPT Method

Background: Genome-wide association studies (GWAS) require large sample sizes to obtain adequate statistical power, but it may be possible to increase the power by incorporating complementary data. In this study we investigated the feasibility of automatically retrieving information from the medical literature and leveraging this information in GWAS. Methods: We developed a method that searches through PubMed abstracts for pre-assigned keywords and key concepts, and uses this information to assign prior probabilities of association for each single nucleotide polymorphism (SNP) with the phenotype of interest - the Adjusting Association Priors with Text (AdAPT) method. Association results from a GWAS can subsequently be ranked in the context of these priors using the Bayes False Discovery Probability (BFDP) framework. We initially tested AdAPT by comparing rankings of known susceptibility alleles in a previous lung cancer GWAS, and subsequently applied it in a two-phase GWAS of oral cancer. Results: Known lung cancer susceptibility SNPs were consistently ranked higher by AdAPT BFDPs than by p-values. In the oral cancer GWAS, we sought to replicate the top five SNPs as ranked by AdAPT BFDPs, of which rs991316, located in the ADH gene region of 4q23, displayed a statistically significant association with oral cancer risk in the replication phase (per-rare-allele log additive p-value [p(trend)] = 2.5 x 10(-3)). The combined OR for having one additional rare allele was 0.83 (95% CI: 0.76-0.90), and this association was independent of previously identified susceptibility SNPs that are associated with overall UADT cancer in this gene region. We also investigated if rs991316 was associated with other cancers of the upper aerodigestive tract (UADT), but no additional association signal was found. Conclusion: This study highlights the potential utility of systematically incorporating prior knowledge from the medical literature in genome-wide analyses using the AdAPT methodology. AdAPT is available online (url: http://services.gate.ac.uk/lld/gwas/service/config).