Influence of technique and manipulation on self-adhesive resin cements used to cement intraradicular posts

Statement of problem: Resin cements are widely used to cement intraradicular posts, but bond strength is significantly influenced by the technique and material used for cementation. Purpose: The purpose of this study was to evaluate the bond strength of 3 self-adhesive cements used to cement intraradicular glass fiber posts. The cements all required different application and handling techniques. Material and Methods: Forty-five human maxillary canines were selected and randomly divided into 3 groups n= 15 by drawing lots: Group BIS – Biscem, Group BRE – Breeze, and Group MAX – Maxcem. Each group was divided into 3 subgroups according to application and handling techniques: Sub-group A – Automix/Point tip applicator, Sub-group L – Handmix/Lentulo, and Sub-group C – Handmix/Centrix. Cementation of the posts was performed according to the manufacturers’ instructions. The push-out test was performed with a crosshead speed of 0.5 mm/min, and bond strength was expressed in megapascals. The results were evaluated by 2-way ANOVA and the all pairwise multiple comparison procedures (Tukey test) (?=.05). Results: Breeze cement showed the highest average for the subgroups A, L, and C when compared to the Biscem cement and Maxcem Elite (P<.05). Statistically significant differences among the subgroups were only observed for Biscem. Conclusions: This study shows that application and handling techniques may influence the bond strength of different self-adhesive cements when used for intraradicular post cementation.

Home range, movements and diurnal roosts of the endangered thin-spined porcupine, Chaetomys subspinosus (Rodentia: Erethizontidae), in the Brazilian Atlantic Forest

Chaetomys subspinosus is the sole species within the Chaetomyinae subfamily of Caviomorph rodents. This poorly studied porcupine is restricted to the Atlantic Forest in eastern Brazil, where deforestation and habitat fragmentation threaten its survival. Data on the ranging and roosting behavior of C. subspinosus is fairly scarce as it is difficult to observe these behaviors in nature and, consequently, it is very rarely detected during field surveys. We monitored the home ranges of three radio-tagged females over the course of 1 year (2005-2006) and collected data on several aspects of their natural history including movement patterns and the use of diurnal roosts and latrines. The animals were monitored at Parque Estadual Paulo Cesar Vinha, a nature reserve dominated by restinga forests, a subtype of Atlantic Forest occurring on sandy soil. The estimated home range varied little between individuals and was relatively small (mean = 2.14 ha/individual and 1.09 ha/individual using minimum convex polygon and kernel methods, respectively). The animals travelled an average of 147 m/night (range: 21-324 m/night) between two consecutive day roosts. The day roosts were mostly located on vine and liana tangles in the canopy which also aid in connecting the canopy to adjacent trees or the forest floor. Latrines were mostly located near the ground in places heavily protected by spiny bromeliads or by other tangled vegetation. Our data suggests that C. subspinosus has the smallest range among all Neotropical Erethizontids which is likely due to its small size and strictly folivorous diet. Our data also helps explain why C. subspinosus is so difficult to observe in nature: researchers should focus on arboreal masses of tangled vegetation where individuals will normally rest during the day. (C) 2011 Deutsche Gesellschaft fur Saugetierkunde. Published by Elsevier GmbH. All rights reserved.

Fiber Post Cementation Strategies: Effect of Mechanical Cycling on Push-out Bond Strength and Cement Polymerization Stress

Purpose: To evaluate the effect of mechanical cycling and cementation strategies on the push-out bond strength between fiber posts and root dentin and the polymerization stresses produced using three resin cements. Materials and Methods: Eighty bovine mandibular teeth were sectioned to a length of 16 mm, prepared to 12 mm, and embedded in self-curing acrylic resin. The specimens were then distributed into 8 groups (n = 10): Gr1 - Scotchbond Multi Purpose + RelyX ARC; Gr2 - Scotchbond Multi Purpose + RelyX ARC + mechanical cycling; Gr3 - AdheSE + Multilink Automix; Gr4 - AdheSE + Multilink Automix + mechanical cycling; Gr5 - phosphoric acid + RelyX U100 (self-adhesive cement); Gr6 - phosphoric acid+ RelyX U100 + mechanical cycling; Gr7 - RelyX U100; Gr8 - RelyX U100 + mechanical cycling. The values obtained from the push-out bond strength test were submitted to two-way ANOVA and Tukey's test (p = 0.05), while the values obtained from the polymerization stress test were subjected to one-way ANOVA and Tukey's test (alpha = 0.05). Results: Mechanical cycling did not affect the bond strength values (p = 0.236), while cementation strategies affected the push-out bond strength (p < 0.001). Luting with RelyX U100 and Scotch Bond Multi Purpose + RelyX ARC yielded higher push-out bond strength values. The polymerization stress results were affected by the factor "cement" (p = 0.0104): the self-adhesive cement RelyX U100 exhibited the lowest values, RelyX ARC resulted in the highest values, while Multi link Automix presented values statistically similar to the other two cements. Conclusion: The self-adhesive cement appears to be a good alternative for luting fiber posts due to the high push-out bond strengths and lower polymerization stress values.

Arbitrage-Free Conditions and Hedging Strategies for Markets with Penalty Costs on Short Positions

We consider a discrete-time financial model in a general sample space with penalty costs on short positions. We consider a friction market closely related to the standard one except that withdrawals from the portfolio value proportional to short positions are made. We provide necessary and sufficient conditions for the nonexistence of arbitrages in this situation and for a self-financing strategy to replicate a contingent claim. For the finite-sample space case, this result leads to an explicit and constructive procedure for obtaining perfect hedging strategies.

Maternal smoking during pregnancy and primary headache in school-aged children: a cohort study

Background: It is not known whether smoking by mothers during pregnancy is associated with headache in their offspring. Methods: Two prospective cohorts of 869 children aged 10-11 years from Ribeirao Preto (RP) and 805 children aged 7-9 years from Sao Luis (SL) were studied. Data on maternal smoking were collected at birth. Primary headache was defined as a reporting of >= 2 episodes of headache in the past 2 weeks, without any associated organic symptoms. Results: Prevalence of headache was 28.1% in RP and 13.1% in SL as reported by the mothers and 17.5% in RP and 29.4% in SL as reported by the children. Agreement between mothers' report and children's self-report of primary headache in the child was poor. After adjustment, children whose mothers smoked >= 10 cigarettes per day during pregnancy presented higher prevalence of primary headache than their counterparts in both cohorts, as reported by the mother and in RP as reported by the children. Conclusions: Maternal smoking during pregnancy was associated with headache in 7- to 11-year-olds. With one exception, the consistency of the results, despite poor agreement between maternal and children reports of headache, indicates that maternal smoking during pregnancy may contribute to headaches in their children.

Social Skills and Psychological Disorders: Converging and Criterion-Related Validity for YSR and IHSA-Del-Prette in Adolescents at Risk

This study evaluated indexes of converging and criterion-related validity for the Social Skills Inventory for Adolescents (IHSA-Del-Prette) and the Youth Self-Report (YSR) in two samples: one referring to clinical service (CLIN), with 28 adolescents (64.3% boys), 11 through 17 years old (M = 13.75; SD = 1.74), and the other referring to a psycho-educational program (PME = 46.2%), mainly composed of boys (91.7%) aged 13 through 17 (M = 15.33; SD = 1.47). Both samples completed the two inventories. Results showed a high incidence of psychological disorders in both samples (between 4% and 79% in the borderline or clinical range on YSR scales) and accentuated deficits in the general and subscale scores of IHSA-Del-Prette, especially on the frequency scale (25% to 58%). The correlations between the instruments in the two groups supported criterion-related and converging validity. Some issues concerning the differences between the samples and about the construct of social competence, underlying these inventories, are discussed. Key words authors:

Inclusive business and poverty: prospects in the Brazilian context

Inclusive business is a term currently used to explain the organizations that aim to solve social problems with efficiency and financial sustainability by means of market mechanisms. It can be said that inclusive businesses are those targeted at generating employment and income for groups with little or no market mobility, in keeping with the standards of so-called "decent jobs" and in a self-sustaining manner, i.e., generating profit for the enterprises, and establishing relationships with typical business organizations as suppliers of products and services or in the distribution of this type of production. This article discusses the different concepts found in the scientific literature on inclusive businesses. It also analyses data from a survey conducted with the audiences of Social Corporate Responsibility seminars held by FIEMG. This analysis reveals that prospects, risks and idealizations similar to those found in inclusive business theories can also be found among individuals that run social corporate responsibility projects, even if this designation is new for them. The connection between companies and poverty, especially in relation to inclusive businesses, seems full of stumbling blocks and traps in the Brazilian context.