Thermal design of a tray-type distillation column of an ammonia/water absorption refrigeration cycle

The goal of this paper is to present an analysis of a segmented weir sieve-tray distillation column for a 17.58 kW (5 TR) ammonia/water absorption refrigeration cycle. Balances of mass and energy were performed based on the method of Ponchon-Savarit, from which it was possible to determine the ideal number of trays. The analysis showed that four ideal trays were adequate for that small absorption refrigeration system having the feeding system to the column right above the second tray. It was carried out a sensitivity analysis of the main parameters. Vapor and liquid pressure drop constraint along with ammonia and water mass flow ratios defined the internal geometrical sizes of the column, such as the column diameter and height, as well as other designing parameters. Due to the lack of specific correlations, the present work was based on practical correlations used in the petrochemical and beverage production industries. The analysis also permitted to obtain the recommended values of tray spacing in order to have a compact column. The geometry of the tray turns out to be sensitive to the charge of vapor and, to a lesser extent, to the load of the liquid, being insensible to the diameter of tray holes. It was found a column efficiency of 50%. Finally, the paper presents some recommendations in order to have an optimal geometry for a compact size distillation column. (c) 2011 Elsevier Ltd. All rights reserved.

Drying of Phytochemical Preparations in a Spouted Bed: Perspectives and Challenges

This article presents an overview of relevant issues to be considered in the development of standardized phytochemical preparations, focusing on the use of the spouted bed as a drying method. Aspects related to the effects of feed composition properties and processing parameters on system performance and product quality are addressed. From the information presented, it can be concluded that the spouted bed technology can be successfully applied for production of high-quality phytochemical preparations suitable for food and pharmaceutical purposes, considering the requirements for product safety, quality, and efficacy. Nevertheless, it should be emphasized that, at this time, the proposed technology is appropriate for small-scale production, mainly due to difficulties concerning scale-up, modeling, and the simulation of spouted bed systems, and also for predicting product properties and system behavior during operation.

The interaction of postural and voluntary strategies for stability in Parkinson's disease

de Lima-Pardini AC, Papegaaij S, Cohen RG, Teixeira LA, Smith BA, Horak FB. The interaction of postural and voluntary strategies for stability in Parkinson's disease. J Neurophysiol 108: 1244-1252, 2012. First published June 6, 2012; doi:10.1152/jn.00118.2012.-This study assessed the effects of stability constraints of a voluntary task on postural responses to an external perturbation in subjects with Parkinson's disease (PD) and healthy elderly participants. Eleven PD subjects and twelve control subjects were perturbed with backward surface translations while standing and performing two versions of a voluntary task: holding a tray with a cylinder placed with the flat side down [low constraint (LC)] or with the rolling, round side down [high constraint (HC)]. Participants performed alternating blocks of LC and HC trials. PD participants accomplished the voluntary task as well as control subjects, showing slower tray velocity in the HC condition compared with the LC condition. However, the latency of postural responses was longer in the HC condition only for control subjects. Control subjects presented different patterns of hip-shoulder coordination as a function of task constraint, whereas PD subjects had a relatively invariant pattern. Initiating the experiment with the HC task led to 1) decreased postural stability in PD subjects only and 2) reduced peak hip flexion in control subjects only. These results suggest that PD impairs the capacity to adapt postural responses to constraints imposed by a voluntary task.

Contrafreeloading in maned wolves: Implications for their management and welfare

Contrafreeloading occurs when animals spend time and effort to obtain food in the presence of freely available food. There are several interpretations for such an apparent contradiction to optimal foraging models, with an emphasis either on the need to gather and update information about the environment or on the value of performing species-typical responses. Evidence suggests that both gathering information about the environment and the expression of species-typical behaviour are important for the welfare of captive animals. The aim of the present study was to assess the existence of contrafreeloading in maned wolves (Chrysocyon brachyurus), in a situation where animals could get food directly from a "free" source and/or search and handle hidden food items, an alternative that requires more effort and is probably more similar to natural foraging conditions. Eight captive, pair-housed maned wolves were given weekly choice tests in which they could obtain food either by approaching the usual food tray in one section of the enclosure (Tray), and/or by searching for food at variable sites amongst the vegetation in the other section of the enclosure (Scattered). Results indicate that maned wolves spent more time in the Scattered than in the Tray section of the enclosure (P = 0.02) and that they obtained about half of the food from that section (48.54% +/- SE 0.69). Our results, the first to demonstrate contrafreeloading in maned wolves, have implications for the husbandry and welfare of this endangered species. (C) 2012 Elsevier B.V. All rights reserved.

Keeping your balance while balancing a cylinder: interaction between postural and voluntary goals

The present study investigated whether postural responses are influenced by the stability constraint of a voluntary, manual task. We also examined how task constraint and first experience (the condition with which the participants started the experiment) influence the kinematic strategies used to simultaneously accomplish a postural response and a voluntary task. Twelve healthy, older adults were perturbed during standing, while holding a tray with a cylinder placed with the flat side down (low constraint, LC) or with the rolling, round side down (high constraint, HC). Central set changed according to the task constraint, as shown by a higher magnitude of both the gastrocnemius and tibialis anterior muscle activation bursts in the HC than in the LC condition. This increase in muscle activation was not reflected, however, in changes in the center of pressure or center of mass displacement. Task constraint influenced the peak shoulder flexion for the voluntary tray task but not the peak hip flexion for the postural task. In contrast, first experience influenced the peak hip flexion but not the peak shoulder flexion. These results suggest an interaction between two separate control mechanisms for automatic postural responses and voluntary stabilization tasks.

Microstructured ternary solid dispersions to improve carbamazepine solubility

The aim of this study was to investigate the improvement of the aqueous solubility of carbamazepine by preparing microstructured ternary solid dispersions using polyoxylglycerides and colloidal silicon dioxide. Microstructured solid dispersions were obtained in a spray dryer. The influence of the spray drying conditions on the properties of the microparticles was investigated using a full 3(2) factorial design in which the factors studied were the silicon dioxide content and the air outlet temperature. The microparticles were thoroughly characterized in terms of yield, solubility, angle of repose, particle size, drug content, moisture content, sorption isotherms, morphology, thermal behavior, infrared spectroscopy and crystallinity. The dissolution rates of carbamazepine and of the microparticles in water were also determined. In general, the microstructured solid dispersions demonstrated good yield, adequate flow and moisture content (<3%), drug recovery (91.98 to 100.22%) and particle size (<142.90 mu m). Thermal and infrared analysis showed that there was no drug interaction during the process. On the other hand, the results of X-ray diffraction evidenced a partial polymorphic modification of carbamazepine. The solubility and dissolution rates of carbamazepine were remarkably improved. Therefore, the results confirm the high potential of the spray drying technique to obtain microstructured ternary solid dispersions. (C) 2011 Elsevier B.V. All rights reserved.

Producción de tomate tipo italiano en función del volumen de la celda y de la edad de las mudas

Con el objetivo de evaluar la influencia de las bandejas de celdas sobre la producción de tomate tipo italiano en el campo, se realizó este trabajo en Piracicaba, SP, Brasil, de mayo a agosto del 2005. Los tratamientos consistieron en cuatro volúmenes de recipiente, tres bandejas de poliestireno expandido de 121,2; 34,6 y 12,0 cm³ y de una bandeja de plástico rígido de 14,0 cm³ (72, 128, 288 y 450 celdas, respectivamente) combinadas con cuatro edades para el trasplante (19, 24, 29 y 34 días después de la siembra). El delineamiento para la producción de mudas fue completamente al azar, con cinco plantas por parcela y tres repeticiones. Se analizaron área foliar, altura, masa verde y seca de la parte aérea y raíz y la calidad de las mudas. En la producción a campo, el delineamiento fue en bloques al azar con diez plantas por parcela y tres repeticiones. Fueron evaluadas la precocidad para inicio de cosecha, producción comercial y total por planta. Volúmenes mayores de recipiente (121,2 y 34,6 cm³) presentaron mejor calidad de mudas. En la producción de frutos, el número comercial y total de frutos por planta fue superior en la muda de 24 días de edad, sin embargo, en la producción total de frutos, no hubo diferencia entre los tratamientos. Por otro lado, también se obtuvo precocidad para la cosecha en los tratamientos realizados en los volúmenes de 121,2 y 34,6 cm³. El volumen de recipiente de 14,0 cm³ (450 celdas) resultó en mudas de calidad muy inferior, alongadas y raquíticas.