Cellulose micro/nanofibres from Eucalyptus kraft pulp: Preparation and properties

There is growing interest in cellulose nanofibres from renewable sources for several industrial applications. However, there is a lack of information about one of the most abundant cellulose pulps: bleached Eucalyptus kraft pulp. The objective of the present work was to obtain Eucalyptus cellulose micro/nanofibres by three different processes, namely: refining, sonication and acid hydrolysis of the cellulose pulp. The refining was limited by the low efficiency of isolated nanofibrils, while sonication was more effective for this purpose. However, the latter process occurred at the expense of considerable damage to the cellulose structure. The whiskers obtained by acid hydrolysis resulted in nanostructures with lower diameter and length, and high crystallinity. Increasing hydrolysis reaction time led to narrower and shorter whiskers, but increased the crystallinity index. The present work contributes to the different widespread methods used for the production of micro/nanofibres for different applications. (C) 2012 Elsevier Ltd. All rights reserved.

Emission features of microstructures fabricated by two-photon polymerization containing three organic dyes

Fabrication of microstructures containing active compounds, such as fluorescent dyes and nanoparticles have been exploited in the last few years, aiming at applications from photonics to biology. Here we fabricate, using two-photon polymerization, microstructures containing the fluorescent dyes Stilbene 420, Disodium Fluorescein and Rhodamine B. The produced microstructures, containing dyes at specific sites, present good structural integrity and a broad fluorescence spectrum, from about 350 nm until 700 nm. Such spectrum can be tuned by using different excitation wavelengths and selecting the excitation position in the microstructure. These results are interesting for designing multi-doped structures, presenting tunable and broad fluorescence spectrum. (C)2012 Optical Society of America

Near-infrared quantum cutting through a three-step energy transfer process in Nd3+-Yb3+ co-doped fluoroindogallate glasses

The Nd3+-Yb3+ couple was investigated in fluoroindogallate glasses using optical spectroscopy to elucidate the energy transfer mechanisms involved in the downconversion (DC) process. Upon excitation of a Nd3+ ion by an ultraviolet photon, DC through a three-step energy transfer process occurs, in which the energy of the ultraviolet photon absorbed by the Nd3+ ion is converted into three infrared photons emitted by Yb3+ ions, i.e. quantum cutting (QC). In addition, with excitation in the visible, our results confirm that the DC process occurs through a one-step energy transfer process, in which the energy of a visible photon absorbed by the Nd3+ ion is converted into only one infrared photon emitted by an Yb3+ ion. Time-resolved measurements enabled the estimation of the efficiencies of the cross-relaxation processes between Nd3+ and Yb3+ ions.

Mangrove Forests and Sedimentary Processes on the South of Coast of Sao Paulo State (Brazil)

Mangrove structure and distribution is conditioned by geomorphic processes. This paper describes the response of mangroves to sedimentary processes at the Cananeia-Iguape Coastal System on the south coast of Sao Paulo State (Brazil), between latitudes 24 degrees 40`S and 25 degrees 20`S. Within six study areas 41 plots were established along 14 transects. Plot size varied according to stem density from 2mx2m to 20mx20m. Here mangroves are strongly coupled to sedimentary processes, forming discrete architectural elements within particular depositional environments or topographic settings. These sedimentary structures and progradation environments are colonized by Laguncularia racemosa, associated with the smooth cordgrass Spartina alterniflora. Rhizophora mangle occurs typically near creeklets where tidal flooding is more frequent. Where tidal influence is restricted Avicennia schaueriana becomes dominant. Erosive margins are dominated by A. schaueriana or R. mangle. Single linkage cluster analysis yields three groups (A, B and C), with high levels of similarity, providing support to the classification of the data into two broad landform categories: depositional and erosive. Group A includes plots with the least structural development (nominal stem diameter d(n) between 1.05 and 4.61cm). Group B is composed of stems of intermediate diameter (4.99 cm <= d(n) <= 5.63cm). Group C plots have the largest structural development (5.50 cm <= d(n) <= 11.10cm). The structure of mangroves (dominance and structural development) reflects responses to geomorphology and habitat change.

Potential impacts of polar fronts on sedimentation processes at Abrolhos coral reef (South-West Atlantic Ocean/Brazil)

Several reefs of the world have undergone changes in community due to sedimentation processes. It has been suggested that Abrolhos reefs (Brazil/South-West Atlantic) are subjected to a steady coastal influence, although there is still little information regarding this assumption. In this work, we have analyzed a set of environmental parameters concerning sedimentation characteristics at the Abrolhos reefs, near 18 degrees S-39 degrees W. The analysis included remote sensing, model and in situ data to provide a three-dimensional quantitative description of the processes that influence sediment apportionment to the reefs. Mineralogy and natural radioactivity of sediment trapped at three reef sites in a transect perpendicular to the coastline were used in conjunction with numerical weather prediction model and remote sensing databases. We have observed an increase of around 100% of sediment flux during the summer compared to the winter season. A comparison of regional rainfall regime, sediment plume dynamics and a year-around monitoring of polar fronts trajectories and surface wind showed that the wind-driven resedimentation due to polar front activity is the major contributor to the intensification of sedimentation processes at the offshore area of Abrolhos reefs, despite river runoff from mainland. (C) 2007 Elsevier Ltd. All rights reserved.

Temperature Effect on the Two-Photon Absorption Spectrum of All-trans-beta-carotene

In this report, we investigate the influence of temperature on the two-photon absorption (2PA) spectrum of all-trans-beta-carotene using the femtosecond white-light-continuum Z-scan technique. We observed that the 2PA cross-section decreases quadratically with the temperature. Such effect was modeled using a three-energy-level diagram within the sum-over-essential states approach, assuming temperature dependencies to the transition dipole moment and refractive index of the solvent. The results show that the transition dipole moments from ground to excited state and between the excited states, which governed the two-photon matrix element, have distinct behaviors with the temperature. The first one presents a quadratic dependence, while the second exhibits a linear dependence. Such effects were attributed mainly to the trans -> cis thermal interconversion process, which decreases the effective conjugation length, contributing to diminishing the transition dipole moments and, consequently, the 2PA cross-section.

Interactive Processes among Babies at a Daycare Center

The paper presents a study regarding babies' interactive processes with peers, which aimed to apprehend some of their qualitative aspects, considering babies' peculiarities. An empirical work was conducted with video recording scenes and interviews, regarding the "Babies' Adaptation to a Daycare Center" project, which followed up 21 babies (4-13 months) at a daycare center. Data analysis was based on the Network of Meanings perspective. Five episodes are here presented regarding three focal subjects and their peers. Analysis indicates the occurrence of interactions; among them it can be highlighted the role of the glance, presence of triadic relations (even among babies younger than nine months old), abbreviation of communicative resources and empathy. Moreover, despite verbal language absence at this age, it was verified meaning processes. Some practical-theoretical implications are pointed out as well.

Chromosome painting in three-toed sloths: a cytogenetic signature and ancestral karyotype for Xenarthra

Background: Xenarthra (sloths, armadillos and anteaters) represent one of four currently recognized Eutherian mammal supraorders. Some phylogenomic studies point to the possibility of Xenarthra being at the base of the Eutherian tree, together or not with the supraorder Afrotheria. We performed painting with human autosomes and X-chromosome specific probes on metaphases of two three-toed sloths: Bradypus torquatus and B. variegatus. These species represent the fourth of the five extant Xenarthra families to be studied with this approach. Results: Eleven human chromosomes were conserved as one block in both B. torquatus and B. variegatus: (HSA 5, 6, 9, 11, 13, 14, 15, 17, 18, 20, 21 and the X chromosome). B. torquatus, three additional human chromosomes were conserved intact (HSA 1, 3 and 4). The remaining human chromosomes were represented by two or three segments on each sloth. Seven associations between human chromosomes were detected in the karyotypes of both B. torquatus and B. variegatus: HSA 3/21, 4/8, 7/10, 7/16, 12/22, 14/15 and 17/19. The ancestral Eutherian association 16/19 was not detected in the Bradypus species. Conclusions: Our results together with previous reports enabled us to propose a hypothetical ancestral Xenarthran karyotype with 48 chromosomes that would differ from the proposed ancestral Eutherian karyotype by the presence of the association HSA 7/10 and by the split of HSA 8 into three blocks, instead of the two found in the Eutherian ancestor. These same chromosome features point to the monophyly of Xenarthra, making this the second supraorder of placental mammals to have a chromosome signature supporting its monophyly.

Experimental investigations of heat transfer coefficients of cutting fluids in metal cutting processes: analysis of workpiece phenomena in a given case study

This paper reports an experimental method to estimate the convective heat transfer of cutting fluids in a laminar flow regime applied on a thin steel plate. The heat source provided by the metal cutting was simulated by electrical heating of the plate. Three different cooling conditions were evaluated: a dry cooling system, a flooded cooling system and a minimum quantity of lubrication cooling system, as well as two different cutting fluids for the last two systems. The results showed considerable enhancement of convective heat transfer using the flooded system. For the dry and minimum quantity of lubrication systems, the heat conduction inside the body was much faster than the heat convection away from its surface. In addition, using the Biot number, the possible models were analyzed for conduction heat problems for each experimental condition tested.

Indirect doping of microstructures fabricated by two-photon polymerization with gold nanoparticles

Nanoplasmonics and metamaterials sciences are rapidly growing due to their contributions to photonic devices fabrication with applications ranging from biomedicine to photovoltaic cells. Noble metal nanoparticles incorporated into polymer matrix have great potential for such applications due to their distinctive optical properties. However, methods to indirectly incorporate metal nanoparticles into polymeric microstructures are still on demand. Here we report on the fabrication of two-photon polymerized microstructures doped with gold nanoparticles through an indirect doping process, so they do not interfere in the two-photon polymerization (2PP) process. Such microstructures present a strong emission, arising from gold nanoparticles fluorescence. The microstructures produced are potential candidates for nanoplasmonics and metamaterials devices applications and the nanoparticles production method can be applied in many samples, heated simultaneously, opening the possibility for large scale processes. (C) 2012 Optical Society of America

Application of the Z-scan technique to determine the optical Kerr coefficient and two-photon absorption coefficient of magnetite nanoparticles colloidal suspension

We investigate the occurrence of the optical Kerr effect and two-photon absorption when an oil-based magnetic Fe3O4 nanoparticles colloidal suspension is illuminated with high intensity femtosecond laser pulses. The frequency of the pulses is controlled and the Z-scan technique is employed in our measurements of the nonlinear optical Kerr coefficient (n(2)) and two-photon absorption coefficient (beta). From these values it was possible to calculate the real and imaginary parts of the third-order susceptibility. We observed that increasing the pulse frequency, additional physical processes take place, increasing artificially the absolute values of n(2) and beta. The experimental conditions are discussed to assure the obtention of reliable values of these nonlinear optical parameters, which may be useful in all-optical switching and optical power limiting applications. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4723829]

Efficiency of extrinsic and intrinsic charge-carrier photogeneration processes obtained from the steady-state photocurrent action spectra of poly(p-phenylene vinylene) derivatives

The efficiency of the charge-carrier photogeneration processes in poly(2,5-bis(3',7'-dimethyl-octyloxy)-1,4-phenylene vinylene) (OC(1)OC10-PPV) has been analyzed by the spectral response of the photocurrent of devices in ITO/polymer/Al structures. The symbatic response of the photocurrent action spectra of the OC1OC10-PPV devices, obtained for light-excitation through the ITO electrode and for forward bias, has been fitted using a phenomenological model which considers that the predominant transport mechanism under external applied electric field is the drift of photogenerated charge-carriers, neglecting charge-carrier diffusion. The proposed model takes into account that charge-carrier photogeneration occurs via intermediate stages of bounded pairs (excitonic states), followed by dissociation processes. Such processes result in two different contributions to the photoconductivity: The first one, associated to direct creation of unbound polaron pairs due to intrinsic photoionization; and the second one is associated to secondary processes like extrinsic photoinjection at the metallic electrodes. The results obtained from the model have shown that the intrinsic component of the photoconductivity at higher excitation energies has a considerably higher efficiency than the extrinsic one, suggesting a dependence on the photon energy for the efficiency of the photogeneration process.

Seven new species of Cerambycidae (Coleoptera) from South America with the proposal of three new genera

The following new species are described - Cerambycinae, Sydacini: Sydax flechtmanni sp. nov. from Brazil (São Paulo); Eburiini: Ebrodacrys biffipradorum sp. nov. from Brazil (Roraima); - Lamiinae, Pteropliini: Ataxia piauiensis sp. nov. from Brazil (Piuaí); Calliini: Amucallia carbonaria sp. nov. from French Guiana; A. citrina sp. nov. from Guiana. Also in Lamiinae, two new genera of Onciderini are proposed. Ubytyra gen. nov., type species U. tuberosa sp. nov. from Peru (Junin) e Japi gen. nov., type species J. duartei sp. nov., from Brazil (São Paulo); Ubytyra gen. nov. can be distinguished by the sides of prothorax with long central spine rounded at apex, and this new feature among Onciderini is discussed. Japi gen. nov., is characterized by a fringe of long hairs on the inner side of antennomere III, present only in species from North and Central America, and gender comparison of these species is done and discussed. In Hemilophini, Pseudotacocha gen. nov., type species P. magnifica sp. nov. from Peru (Cuzco), are described. The new genera can be distinguished by eyes well developed, elytra with two carinae and the apices outer with short spine; a comparison with related genera is done.