Teste de raios X na avaliação da qualidade de sementes de mamona

O crescente interesse pelo uso de combustíveis renováveis nos últimos anos fez com que culturas oleaginosas, como a mamona, se tornassem importante objeto de estudo. No entanto, para a instalação de campos desta cultura, é imprescindível o uso de sementes de alta qualidade. O objetivo da pesquisa contida neste trabalho foi verificar a eficiência do teste de raios X na avaliação da qualidade de sementes de mamona após a colheita e armazenamento. Três lotes de sementes da cv. 'IAC-2028' (provenientes, respectivamente, dos racemos primário, secundário e terciário) e dois lotes da cv. 'Guarani' (lotes comerciais com sementes de todos os racemos misturados) foram avaliados de acordo com a morfologia interna pelo teste de raios X, na intensidade de 20 kV por 60 segundos de exposição. Posteriormente, as sementes radiografadas foram submetidas ao teste de germinação de modo a relacionar a morfologia interna das sementes com as respectivas plântulas normais, anormais ou sementes mortas. Após seis meses de armazenamento acondicionadas em sacos de papel Kraft, em condições não controladas de temperatura e umidade relativa do ar, amostras dessas sementes foram novamente avaliadas pelo teste de raios X. O teste de raios X é eficiente para avaliar a morfologia interna das sementes e seus reflexos no potencial fisiológico.

Copper ore type definition from Sossego Mine using X-ray diffraction and cluster analysis technique

This paper presents the classification of 110 copper ore samples from Sossego Mine, based on X-ray diffraction and cluster analysis. The comparison based on the position and the intensity of the diffracted peaks allowed the distinction of seven ore types, whose differences refer to the proportion of major minerals: quartz, feldspar, actinolite, iron oxides, mica and chlorite. There was a strong correlation between the grouping and the location of the samples in Sequeirinho and Sossego orebodies. This relationship is due to different types and intensities of hydrothermal alteration prevailing in each body, which reflect the mineralogical composition and thus the X-ray diffractograms of samples.

Caracterização de neossolos regolíticos da região semiárida do Estado de Pernambuco

Estudos de caracterização de solos em regiões ainda pouco exploradas, além de disponibilizarem e ampliarem a base de informações sobre as mais distintas ordens de solos do território nacional, também permitem sistematizar informações sobre suas propriedades, que poderão servir de subsídio para o desenvolvimento de práticas de manejo e uso sustentável das terras. Entre os principais solos recorrentes na região semiárida pernambucana, destacam-se os Neossolos Regolíticos, os quais perfazem aproximadamente 27 % da superfície do Estado e recobrem importantes áreas voltadas à produção agrícola, especialmente à agricultura familiar. Considerando a possibilidade de ocorrência de Neossolos Regolíticos com distintas propriedades físicas, químicas ou mineralógicas, em razão da existência de distintos contextos geológicos e climáticos ao longo do Estado de Pernambuco, o presente trabalho teve como objetivo caracterizar física, química e mineralogicamente Neossolos Regolíticos ao longo da região semiárida do Estado de Pernambuco, bem como relacionar os solos com sua litologia. Para isso, foram selecionados cinco perfis de Neossolos Regolíticos em diversos municípios do Estado de Pernambuco (P1=São Caetano, P2=Lagoa do Ouro, P3=Caetés, P4=São João e P5=Parnamirim). Os perfis foram descritos morfologicamente, coletando-se amostras de todos os horizontes do solo e da rocha do embasamento. Foram realizadas análises físicas e químicas para fins de classificação de solos, análises mineralógicas das frações grossas (cascalho e areia) por microscopia óptica e das frações silte e argila por difração de raios X, além de análises petrográficas das amostras de rochas. De acordo com os resultados, observou-se a ocorrência de solos semelhantes e com pequeno grau de desenvolvimento pedogenético, variando de medianamente a muito profundos, com sequência de horizontes A-AC-C e Cr e textura arenosa a média. Dois perfis apresentaram caráter solódico em profundidade. Todos os solos apresentaram baixos teores de matéria orgânica e P disponível. Apesar dos baixos teores de cátions trocáveis, todos os perfis são eutróficos. A assembleia mineralógica das frações cascalho, areia e silte é constituída essencialmente por quartzo, seguido de feldspatos e mica, corroborando a constituição petrográfica analisada. A caulinita é o principal argilomineral da fração argila em todos os perfis e horizontes estudados, indicando um importante processo de monossialitização em solos autóctones, em clima caracteristicamente semiárido. No perfil P2, devido à posição mais baixa do solo na paisagem, ocorreram minerais esmectíticos com misturas de fases entre montmorilonita, beidelita ou nontronita, identificados pela análise de DRX, empregando o teste de Greene-Kelly.

Using X rays to evaluate fissures in rice seeds dried artificially

The objective of the present study was to evaluate the efficiency of X-rays in identifying fissures in artificially dried rice seeds and the relationship between damage and seed performance in the germination test. Irrigated rice seeds of the IRGA 417 and IRGA 420 cultivars were harvested with 23.3 and 24.5% water content respectively and submitted to stationary drying treatments at 32, 38, 44 and 50 °C. X-rays were taken of subsamples of 100 seeds for each treatment, using an MX-20 X-ray equipment. The X-rayed seeds were classified from 1 to 3, where 1 corresponded to seeds without fissures, 2 to seeds with non-severe fissures and 3 to seeds with severe fissures. The same X-rayed seeds were planted and on the seventh day the seedlings (normal or abnormal) and dead seeds were photographed and evaluated to verify any relationship between the fissures and physiological potential. Higher drying temperature increased the percentage of fissures in the two cultivars, which can adversely affect their germination. Seeds with fissures can be identified using X-rays.

X-Ray analysis to assess mechanical damage in sweet corn seeds

The X-ray test is a precise, fast and non-destructive method to detect mechanical damage in seeds. In the present study, the efficiency of X-ray analysis in identifying the extent of mechanical damage in sweet corn seeds and its relationship with germination and vigor was evaluated. Hybrid 'SWB 551' (sh2) seeds with round (R) and flat (F) shapes were classified as large (L), medium (M1, M2 and M3) and small (S), using sieves with round and oblong screens. After artificial exposure to different levels of damage (0, 1, 3, 5 and 7 impacts), seeds were X-rayed (15 kV, 5 min) and submitted to germination (25 °C/5 days) and cold (10 °C/7 days) tests. Digital images of normal and abnormal seedlings and ungerminated seeds from germination and cold tests were jointly analyzed with the seed X-ray images. Results showed that damage affecting the embryonic axis resulted in abnormal seedlings or dead seeds in the germination and cold tests. The X-ray analysis is efficient for identifying mechanical damage in sweet corn seeds, allowing damage severity to be associated with losses in germination and vigor.

Time lags of the kilohertz quasi-periodic oscillations in the low-mass X-ray binaries 4U 1608−52 and 4U 1636−53

We studied the energy and frequency dependence of the Fourier time lags and intrinsic coherence of the kilohertz quasi-periodic oscillations (kHz QPOs) in the neutron-star lowmass X-ray binaries 4U 1608−52 and 4U 1636−53, using a large data set obtained with the Rossi X-ray Timing Explorer. We confirmed that, in both sources, the time lags of the lower kHz QPO are soft and their magnitude increases with energy. We also found that: (i) In 4U 1636−53, the soft lags of the lower kHz QPO remain constant at∼30 μs in the QPO frequency range 500–850 Hz, and decrease to ∼10 μs when the QPO frequency increases further. In 4U 1608−52, the soft lags of the lower kHz QPO remain constant at 40 μs up to 800 Hz, the highest frequency reached by this QPO in our data. (ii) In both sources, the time lags of the upper kHz QPO are hard, independent of energy or frequency and inconsistent with the soft lags of the lower kHz QPO. (iii) In both sources the intrinsic coherence of the lower kHz QPO remains constant at ∼0.6 between 5 and 12 keV, and drops to zero above that energy. The intrinsic coherence of the upper kHz QPO is consistent with being zero across the full energy range. (iv) In 4U 1636−53, the intrinsic coherence of the lower kHz QPO increases from ∼0 at ∼600 Hz to ∼1, and it decreases to ∼0.5 at 920 Hz; in 4U 1608−52, the intrinsic coherence is consistent with the same trend. (v) In both sources the intrinsic coherence of the upper kHz QPO is consistent with zero over the full frequency range of the QPO, except in 4U 1636−53 between 700 and 900 Hz where the intrinsic coherence marginally increases. We discuss our results in the context of scenarios in which the soft lags are either due to reflection off the accretion disc or up-/down-scattering in a hot medium close to the neutron star. We finally explore the connection between, on one hand the time lags and the intrinsic coherence of the kHz QPOs, and on the other the QPOs’ amplitude and quality factor in these two sources.

Reactive sputter magnetron reactor for preparation of thin films and simultaneous in-situ structural study by X-ray diffraction.

Reactive Sputter Magnetron (RSM) is a widely used technique to thin films growing of compounds both, in research laboratories and in industrial processes. The nature of the deposited compound will depend then on the nature of the magnetron target and the nature of the ions generated in the plasma. One important aspect of the problem is the knowledge of the evolution of the film during the process of growing itself. In this work, we present the design, construction of a chamber to be installed in the Huber goniometer in the XRD2 line of LNLS in Campinas, which allows in situ growing kinetic studies of thin films.

Crystallization and preliminary X-ray diffraction analysis of selenophosphate synthetases from Trypanosoma brucei and Leishmania major

Selenophosphate synthetase (SPS) plays an indispensable role in selenium metabolism, being responsible for catalyzing the activation of selenide with adenosine 5'-triphosphate (ATP) to generate selenophosphate, the essential selenium donor for selenocysteine synthesis. Recombinant full-length Leishmania major SPS (LmSPS2) was recalcitrant to crystallization. Therefore, a limited proteolysis technique was used and a stable N-terminal truncated construct (ΔN-LmSPS2) yielded suitable crystals. The Trypanosoma brucei SPS orthologue (TbSPS2) was crystallized by the microbatch method using paraffin oil. X-ray diffraction data were collected to resolutions of 1.9 Å for ΔN-LmSPS2 and 3.4 Å for TbSPS2.