EROSION LOSSES FROM RUNOFF: INTERACTION OF SOIL COVER AND EROSION CONTROL PRACTICE

The flow of sediment from cropped land is the main pollutant of water sources in rural areas. Due to this fact, it is necessary to develop and implement technologies that will reduce water and sediment discharges. Accordingly, an experiment was conducted in the Department of Biosystems Engineering - ESALQ / USP, Piracicaba - SP with the objective to evaluate the effect of different soil cover (bean, grass and bare ground) and erosion control practices (wide base terraces and infiltration furrows in slopes (no practices to control erosion)) while measuring water losses in runoff. The statistical design adopted was randomized blocks in a 3x3 factorial scheme resulting in 9 treatments with 3 replicates (blocks). The period of rainfall data collection was December 6, 2007 to April 11, 2008. A 21.1 cm diameter rain gauge was installed in the experimental area. Terraces were the most efficient practices for reducing erosion losses in the treatments with infiltration furrows being better than the control treatment. Bean was more effective than grass in reducing erosion. Bare ground was the least efficient.

Synthesis Methodology Applied to a Tunable Patch Filter With Independent Frequency and Bandwidth Control

A new methodology for the synthesis of tunable patch filters is presented. The methodology helps the designer to perform a theoretical analysis of the filter through a coupling matrix that includes the effect of the tuning elements used to tune the filter. This general methodology accounts for any tuning parameter desired and was applied to the design of a tunable dual-mode patch filter with independent control of center frequency and bandwidth (BW). The bandpass filter uses a single triangular resonator with two etched slots that split the fundamental degenerate modes and form the filter passband. Varactor diodes assembled across the slots are used to vary the frequency of each degenerate fundamental mode independently, which is feasible due to the nature of the coupling scheme of the filter. The varactor diode model used in simulations, their assembling, the dc bias configuration, and measured results are presented. The theory results are compared to the simulations and to measurements showing a very good agreement and validating the proposed methodology. The fabricated filter presents an elliptic response with 20% of center frequency tuning range around 3.2 GHz and a fractional BW variation from 4% to 12% with low insertion loss and high power handling with a 1-dB compression point higher than +14.5 dB.

Relationship among social support, treatment adherence and metabolic control of diabetes mellitus patients

This cross-sectional and quantitative study aimed to analyze the relationship among social support, adherence to non-pharmacological (diet and physical exercise) and pharmacological treatments (insulin and/or oral anti-diabetic medication) and clinical and metabolic control of 162 type 2 diabetes mellitus patients. Data were collected through instruments validated for Brazil. Social support was directly correlated with treatment adherence. Adherence to non-pharmacological treatment was inversely correlated with body mass index, and medication adherence was inversely correlated with diastolic blood pressure. There were no associations between social support and clinical and metabolic control variables. Findings indicate that social support can be useful to achieve treatment adherence. Studies with other designs should be developed to broaden the analysis of relations between social support and other variables.

A modified Primal-Dual Logarithmic-Barrier Method for solving the Optimal Power Flow problem with discrete and continuous control variables

The aim of solving the Optimal Power Flow problem is to determine the optimal state of an electric power transmission system, that is, the voltage magnitude and phase angles and the tap ratios of the transformers that optimize the performance of a given system, while satisfying its physical and operating constraints. The Optimal Power Flow problem is modeled as a large-scale mixed-discrete nonlinear programming problem. This paper proposes a method for handling the discrete variables of the Optimal Power Flow problem. A penalty function is presented. Due to the inclusion of the penalty function into the objective function, a sequence of nonlinear programming problems with only continuous variables is obtained and the solutions of these problems converge to a solution of the mixed problem. The obtained nonlinear programming problems are solved by a Primal-Dual Logarithmic-Barrier Method. Numerical tests using the IEEE 14, 30, 118 and 300-Bus test systems indicate that the method is efficient. (C) 2012 Elsevier B.V. All rights reserved.

Potential Effects of Alendronate on Fibroblast Growth Factor 23 Levels and Effective Control of Hypercalciuria in an Adult with Jansen's Metaphyseal Chondrodysplasia

Context: Jansen's metaphyseal chondrodysplasia (JMC) is a rare autosomal dominant disorder caused by activating mutations in the PTH 1 receptor (PTH1R; PTH/PTHrP receptor), leading to chronic hypercalcemia and hypercalciuria. Hypophosphatemia is also a hallmark of JMC, and recently, increased fibroblast growth factor 23 (FGF23) levels have been reported in this syndrome. Hypercalcemia has been associated with increased cardiovascular risk; however, cardiovascular disease has not been extensively investigated in JMC patients. Objective: The aim of the study was to describe the long-term follow-up of a JMC patient with regard to the management of hypercalciuria, the evaluation of FGF23 levels under bisphosphonate treatment, and the investigation of cardiovascular repercussion of chronic hypercalcemia. Results: The diagnosis of JCM was confirmed by molecular analysis (p.H223R mutation in PTH1R). The patient was followed from 5 to 27 yr of age. Asymptomatic nephrolithiasis was diagnosed at 18 yr of age, prompting pharmacological management of hypercalciuria. Treatment with alendronate reduced hypercalciuria; however, normocalciuria was only obtained with the association of thiazide diuretic. Serum FGF23 levels, measured under alendronate treatment, were repeatedly within the normal range. Subclinical cardiovascular disease was investigated when the patient was 26 yr old, after 19 yr of sustained mild hypercalcemia; carotid and vertebral artery ultrasonography was normal, as well as coronary computed tomography angiography (calcium score = 0). Conclusion: The long-term follow-up of our JMC patient has provided insight on therapeutic strategies to control hypercalciuria, on the potential effects of alendronate on FGF23 levels, and on the lack of detectable cardiovascular disease at young adulthood after prolonged exposure to hypercalcemia. (J Clin Endocrinol Metab 97: 1098-1103, 2012)

Ethnicity and Cutaneous Melanoma in the City of Sao Paulo, Brazil: A Case-Control Study

Background: Over the last century the incidence of cutaneous melanoma has increased worldwide, a trend that has also been observed in Brazil. The identified risk factors for melanoma include the pattern of sun exposure, family history, and certain phenotypic features. In addition, the incidence of melanoma might be influenced by ethnicity. Like many countries, Brazil has high immigration rates and consequently a heterogenous population. However, Brazil is unique among such countries in that the ethnic heterogeneity of its population is primarily attributable to admixture. This study aimed to evaluate the contribution of European ethnicity to the risk of cutaneous melanoma in Brazil. Methodology/Principal Findings: We carried out a hospital-based case-control study in the metropolitan area of Sao Paulo, Brazil. We evaluated 424 hospitalized patients (202 melanoma patients and 222 control patients) regarding phenotypic features, sun exposure, and number of grandparents born in Europe. Through multivariate logistic regression analysis, we found the following variables to be independently associated with melanoma: grandparents born in Europe-Spain (OR = 3.01, 95% CI: 1.03-8.77), Italy (OR = 3.47, 95% CI: 1.41-8.57), a Germanic/Slavic country (OR = 3.06, 95% CI: 1.05-8.93), or >= 2 European countries (OR = 2.82, 95% CI: 1.06-7.47); eye color-light brown (OR = 1.99, 95% CI: 1.14-3.84) and green/blue (OR = 4.62; 95% CI 2.22-9.58); pigmented lesion removal (OR = 3.78; 95% CI: 2.21-6.49); no lifetime sunscreen use (OR = 3.08; 95% CI: 1.03-9.22); and lifetime severe sunburn (OR = 1.81; 95% CI: 1.03-3.19). Conclusions: Our results indicate that European ancestry is a risk factor for cutaneous melanoma. Such risk appears to be related not only to skin type, eye color, and tanning capacity but also to others specific characteristics of European populations introduced in the New World by European immigrants.

Reducing Water and Chloride Penetration Through Silicate Treatments for Concrete as a Mean to Control Corrosion Kinetics

There are currently many types of protective materials for reinforced concrete structures and the influence of these materials in the chloride diffusion coefficient and water penetration still needs more research. The aim of this work is to analyze the contributions regarding the typical three surface concrete protection systems (coatings, linings and pore blockers) and discusses the results of three pore blockers (sodium silicate) tested in this work. To this end, certain tests were used: one involving permeability mechanism (low pressure-immersion absorption), one involving capillary water absorption, and the last, a migration test used to estimate the effective chloride diffusion coefficient in saturated condition. Results indicated reduction in chloride diffusion coefficients and capillary water absorption, therefore, restrictions to water penetration from external environmental. As a consequence, a reduction of the corrosion kinetics and a control of the chloride ingress are expected.

Postural control in elderly women with osteoporosis: comparison of balance, strengthening and stretching exercises. A randomized controlled trial

Objective: To compare the efficacy of balance training associated with muscle strengthening or stretching, relative to no intervention, in the postural control of elderly women with osteoporosis. Design: A randomized, controlled trial. Subjects and interventions: Sample consisted of 50 women aged 65 years or older, with osteoporosis, randomized into one of three groups: strengthening group (n = 17) performed balance training with muscle strengthening; stretching group (n = 17) performed balance training with stretching; and control group (n = 16), no activities. Interventions lasted eight weeks, twice a week, 60 minutes a day. Main measures: Postural control was evaluated by the modified Clinical Test of Sensory Interaction for Balance (CTSIBm) and Limits of Stability Test. Strength was assessed by dynamometry and the shortening of the hamstrings by goniometry. Results: Relative to controls, participants in the strengthening group displayed significantly increased dorsiflexion strength and knee flexion strength, as well as centre of pressure velocity, directional control, and oscillation velocity (CTSIBm test). The stretching group had significantly improvements in hamstring length, knee flexion strength, centre of pressure velocity, and amplitude of movements. Relative to the stretching group, the strengthening group yielded better knee extension strength and directional control. Conclusion: The results suggest that both interventions are effective in improving postural control when compared to the control group, and the strengthening group was superior to the stretching group in knee extension strength and in directional control.

OPTIMIZATION AND CONTROL OF A CONTINUOUS POLYMERIZATION REACTOR

This work studies the optimization and control of a styrene polymerization reactor. The proposed strategy deals with the case where, because of market conditions and equipment deterioration, the optimal operating point of the continuous reactor is modified significantly along the operation time and the control system has to search for this optimum point, besides keeping the reactor system stable at any possible point. The approach considered here consists of three layers: the Real Time Optimization (RTO), the Model Predictive Control (MPC) and a Target Calculation (TC) that coordinates the communication between the two other layers and guarantees the stability of the whole structure. The proposed algorithm is simulated with the phenomenological model of a styrene polymerization reactor, which has been widely used as a benchmark for process control. The complete optimization structure for the styrene process including disturbances rejection is developed. The simulation results show the robustness of the proposed strategy and the capability to deal with disturbances while the economic objective is optimized.

Optimization and control of a continuous polymerization reactor

This work studies the optimization and control of a styrene polymerization reactor. The proposed strategy deals with the case where, because of market conditions and equipment deterioration, the optimal operating point of the continuous reactor is modified significantly along the operation time and the control system has to search for this optimum point, besides keeping the reactor system stable at any possible point. The approach considered here consists of three layers: the Real Time Optimization (RTO), the Model Predictive Control (MPC) and a Target Calculation (TC) that coordinates the communication between the two other layers and guarantees the stability of the whole structure. The proposed algorithm is simulated with the phenomenological model of a styrene polymerization reactor, which has been widely used as a benchmark for process control. The complete optimization structure for the styrene process including disturbances rejection is developed. The simulation results show the robustness of the proposed strategy and the capability to deal with disturbances while the economic objective is optimized.

A control and automation system for wave basins

This paper presents the new active absorption wave basin, named Hydrodynamic Calibrator (HC), constructed at the University of São Paulo (USP), in the Laboratory facilities of the Numerical Offshore Tank (TPN). The square (14 m 14 m) tank is able to generate and absorb waves from 0.5 Hz to 2.0 Hz, by means of 148 active hinged flap wave makers. An independent mechanical system drives each flap by means of a 1HP servo-motor and a ball-screw based transmission system. A customized ultrasonic wave probe is installed in each flap, and is responsible for measuring wave elevation in the flap. A complex automation architecture was implemented, with three Programmable Logic Computers (PLCs), and a low-level software is responsible for all the interlocks and maintenance functions of the tank. Furthermore, all the control algorithms for the generation and absorption are implemented using higher level software (MATLAB /Simulink block diagrams). These algorithms calculate the motions of the wave makers both to generate and absorb the required wave field by taking into account the layout of the flaps and the limits of wave generation. The experimental transfer function that relates the flap amplitude to the wave elevation amplitude is used for the calculation of the motion of each flap. This paper describes the main features of the tank, followed by a detailed presentation of the whole automation system. It includes the measuring devices, signal conditioning, PLC and network architecture, real-time and synchronizing software and motor control loop. Finally, a validation of the whole automation system is presented, by means of the experimental analysis of the transfer function of the waves generated and the calculation of all the delays introduced by the automation system.