Effect of the Type of Emulsifying Salt on Microstructure and Rheological Properties of "Requeijao Cremoso" Processed Cheese Spreads

The role of different types of emulsifying saltssodium citrate (TSC), sodium hexametaphosphate (SHMP), sodium tripolyphosphate (STPP) and tetrasodium pyrophosphate (TSPP)on microstructure and rheology of requeijao cremoso processed cheese was determined. The cheeses manufactured with TSC, TSPP, and STPP behaved like concentrated solutions, while the cheese manufactured with SHMP exhibited weak gel behavior and the lowest values for the phase angle (G/G). This means that SHMP cheese had the protein network with the largest amount of molecular interactions, which can be explained by its highest degree of fat emulsification. Rotational viscometry indicated that all the spreadable cheeses behaved like pseudoplastic fluids. The cheeses made with SHMP and TSPP presented low values for the flow behavior index, meaning that viscosity was more dependent on shear rate. Regarding the consistency index, TSPP cheese showed the highest value, which could be attributed to the combined effect of its high pH and homogeneous fat particle size distribution.

Probiotic caprine Coalho cheese naturally enriched in conjugated linoleic acid as a vehicle for Lactobacillus acidophilus and beneficial fatty acids

To obtain a probiotic caprine Coalho cheese naturally enriched in conjugated linoleic acid (CLA), goats' diet was supplemented with soybean oil to produce CLA-enhanced milk, and Lactobacillus acidophilus La5 was incorporated into cheeses. CLA concentration and probiotic viability were evaluated during 60 days. Four pilot-scale cheese-making trials were manufactured, in triplicates. Cheeses T1 and T2 were produced with control milk, and T3 and T4 with CLA-enhanced milk. L. acidophilus was added to cheeses T2 and T4 during processing. The CLA content (isomer C18:2 cis-9, trans-11) in T3 and T4 was 246% to 291% higher than in T1 and T2 (P < 0.01). Populations of L. acidophilus were around 7.5 log cfu g(-1) in T2 and T4 during the study, and the highest CLA content in T4 did not influence the probiotic viability (P > 0.01). The CLA-enriched probiotic caprine Coalho cheese obtained is proposed as a vehicle for beneficial microorganisms and fatty acids. (C) 2012 Elsevier Ltd. All rights reserved.

Microbiological quality and safety of minimally processed vegetables marketed in Campinas, SP-Brazil, as assessed by traditional and alternative methods

In this study, a total of 172 samples of minimally processed vegetables (MPV) were collected from supermarkets in the city of Campinas, Brazil. The MPV were analyzed using traditional and/or alternative methods for total aerobic mesophilic bacteria, total coliforms, Escherichia coil, coagulase positive staphylococci, Salmonella and Listeria monocytogenes. All the MPV analyzed presented populations of aerobic mesophilic microorganisms and total coliforms were >4 log(10) CFU/g and 1.0-3.4 log(10) CFU/g, respectively. E. coil was enumerated in only 10 samples out of 172 collected, while none of the 172 samples of MPV presented contamination by coagulase positive Staphylococcus (<10(1) CFU/g). Among the four methods used for detection of Salmonella in MPV (Vidas, 1,2 Test, Reveal, and Traditional), when Reveal was used a total of 29 positive samples were reported. For L monocytogenes, the four methods tested (Vidas, Vip, Reveal, and traditional) performed similarly. The presence of Salmonella and L monocytogenes in MPV was confirmed in one (watercress) and two samples (watercress and escarole), respectively. In conclusion, it has been observed that the microbiological quality of MPV commercialized in Campinas is generally satisfactory. Besides, the choice of microbiological method should be based not only on resource and time issues, but also on parameters such as sensitivity and specificity for the specific foods under ahalysis. (C) 2012 Elsevier Ltd. All rights reserved.

Availability of processed foods in the perimeter of public schools in urban areas

Objective: To assess the availability of food in relation to their degree of industrial processing and the types of food stores in the perimeters of elementary schools. Method: This is a cross-sectional study. 82 food stores located within a 500 m radius buffer of three public schools located in three distinct regions with different socioeconomic levels in the municipality of Santos, state of Sao Paulo, Brazil, were assessed. All streets within a 500-meter radius of the schools were covered, geographic coordinates were recorded and information about the stores and food items available were collected by direct observation and interview with store managers. Available food items were classified in relation to their degree of industrial processing as ultra-processed foods and minimally processed foods. Kernel's density maps were used to assess the degree of agglomeration of stores near the schools. Results: The stores that offered mostly ultra-processed foods were significantly closer to schools than those who offered mostly minimally processed foods. There was a significant difference between the availability of processed food in different types of stores and between the three regions assessed. Conclusions: The data found by this work evidences that children who attend the three public schools assessed are exposed to an environment that encourages the consumption of ultra-processed foods through easier access of these products in the studied stores.

Bacteriocinogenic and virulence potential of Enterococcus isolates obtained from raw milk and cheese

Aims To provide molecular and phenotypical characterization of Enterococcus isolates obtained from raw milk and cheese, regarding their bacteriocinogenic and virulence activity. Methods and Results Forty-three bacteriocinogenic enterococci isolates were identified by 16s rDNA, fingerprinted by RAPD-PCR analysis and tested by PCR for the presence of genes for lantibiotics (lanM, lanB and lanC) and enterocins (entA, entB, entP, entL50AB and entAS48) and by phenotypical methods for bacteriocin production and inhibitory spectrum. Also, the virulence of the isolates was evaluated by PCR for genes gelE, hyl, asa1, esp, cylA, efaA, ace, vanA, vanB, hdc1, hdc2, tdc and odc and by phenotypical tests for gelatinase, lipase, DNAse and a- and beta-haemolysis. Most isolates (93.0%) harboured at least one lantibiotic or enterocin gene and were positive for several tested virulence genes, mainly asa1 (100%), gelE (93.0%) and efaA (83.7%). 53.5% of the isolates presented beta-haemolysis. Conclusions Enterococcus spp. isolates presented an interesting potential application for food preservation because of bacteriocin production; however, virulence-related genes were identified in all RAPD profiles. Significance and Impact of the Study The study demonstrated the contradictory characteristics of the tested Enterococcus isolates: they presented a good potential for application in food biopreservation but contained several virulence factors.

Distribution and stability of aflatoxin M-1 during processing and storage of Minas Frescal cheese

Aflatoxin M-1 (AFM(1)) is a hepatocarcinogen found in milk of animals that have consumed feeds with aflatoxin B-1. The carry-over of AFM(1) from milk to Minas Frescal cheese produced with or without starter cultures was determined. 40 L of milk were divided into 10 L each and assigned to the following treatments for cheese manufacture: 0.250 rig AFM(1) mL(-1), 0.500 rig AFM(1) mL(-1), 0.250 ng AFM(1) mL(-1) + starter, 0.500 ng AFM(1) mL(-1) + starter. Quantification of AFM(1) was achieved by high performance liquid chromatography. The carry-over of AFM(1) from milk to cheese ranged from 30.64% to 42.26%. There was no effect of storage time on AFM(1). Milk with AFM(1) in levels studied may concentrate the toxin in Minas Frescal cheese, but at concentrations below the Brazilian tolerance limit. The addition of starter cultures did not influence concentration or stability of the AFM(1) in cheese over 30 days storage. (C) 2011 Elsevier Ltd. All rights reserved.

On the implementation of good manufacturing practices in a small processing unity of mozzarella cheese in Brazil

This study reports the implementation of GMPs in a mozzarella cheese processing plant. The mozzarella cheese manufacturing unit is located in the Southwestern region of the state of Parana, Brazil, and processes 20,000 L of milk daily. The implementation of GMP took place with the creation of a multi-disciplinary team and it was carried out in four steps: diagnosis, report of the diagnosis and road map, corrective measures and follow-up of GMP implementation. The effectiveness of actions taken and GMP implementation was compared by the total percentages of non-conformities and conformities before and after implementation of GMR Microbiological indicators were also used to assess the implementation of GMP in the mozzarella cheese processing facility. Results showed that the average percentage of conformity after the implementation of GMP was significant increased to 66%, while before it was 32% (p < 0.05). The populations of aerobic microorganisms and total coliforms in equipment were significantly reduced (p < 0.05) after the implementation of GMP, as well as the populations of total coliforms in the hands of food handlers (p < 0.05). In conclusion, GMP implementation changed the overall organization of the cheese processing unity, as well as managers and food handlers' behavior and knowledge on the quality and safety of products manufactured. (C) 2011 Elsevier Ltd. All rights reserved.

Application of bacteriocinogenic Enterococcus mundtii CRL35 and Enterococcus faecium ST88Ch in the control of Listeria monocytogenes in fresh Minas cheese

Several strains of Enterococcus spp. are capable of producing bacteriocins with antimicrobial activity against important bacterial pathogens in dairy products. In this study, the bacteriocins produced by two Enterococcus strains (Enterococcus mundtii CRL35 and Enterococcus faecium ST88Ch), isolated from cheeses, were characterized and tested for their capability to control growth of Listeria monocytogenes 426 in experimentally contaminated fresh Minas cheese during refrigerated storage. Both strains were active against a variety of pathogenic and non-pathogenic microorganisms and bacteriocin absorption to various L. monocytogenes, Enterococcus faecalis ATCC 19443 and Lactobacillus sakei ATCC 15521 varied according to the strain and the testing conditions (pH, temperature, presence of salts and surfactants). Growth of L. monocytogenes 426 was inhibited in cheeses containing E. mundtii CRL35 up to 12 days at 8 degrees C, evidencing a bacteriostatic effect. E. faecium ST88Ch was less effective, as the bacteriostatic affect occurred only after 6 days at 8 degrees C. In cheeses containing nisin (12.5 mg/kg), less than one log reduction was observed. This research underlines the potential application of E. mundtii CRL35 in the control of L. monocytogenes in Minas cheese. (c) 2012 Elsevier Ltd. All rights reserved.

International collaborative project to compare and monitor the nutritional composition of processed foods

Background: Chronic diseases are the leading cause of premature death and disability in the world with overnutrition a primary cause of diet-related ill health. Excess energy intake, saturated fat, sugar, and salt derived from processed foods are a major cause of disease burden. Our objective is to compare the nutritional composition of processed foods between countries, between food companies, and over time. Design: Surveys of processed foods will be done in each participating country using a standardized methodology. Information on the nutrient composition for each product will be sought either through direct chemical analysis, from the product label, or from the manufacturer. Foods will be categorized into 14 groups and 45 categories for the primary analyses which will compare mean levels of nutrients at baseline and over time. Initial commitments to collaboration have been obtained from 21 countries. Conclusions: This collaborative approach to the collation and sharing of data will enable objective and transparent tracking of processed food composition around the world. The information collected will support government and food industry efforts to improve the nutrient composition of processed foods around the world.

Evaluation of a nanometer roughness scale resorbable media-processed surface: a study in dogs

Objectives: This study compared the biomechanical fixation and bone-to-implant contact (BIC) of implants with different surfaces treatment (experimental resorbable blasting media-processed nanometer roughness scale surface, and control dual acid-etched) in a dog model. Material and methods: Surface characterization was made in six implants by means of scanning electron microscopic imaging, atomic force microscopy to evaluate roughness parameters, and X-ray photoelectron spectroscopy (XPS) for chemical assessment. The animal model comprised the bilateral placement of control (n = 24) and experimental surface (n = 24) implants along the proximal tibiae of six mongrel dogs, which remained in place for 2 or 4 weeks. Half of the specimens were biomechanically tested (torque), and the other half was subjected to histomorphologic/ morphometric evaluation. BIC and resistance to failure measures were each evaluated as a function of time and surface treatment in a mixed model ANOVA. Results: Surface texturing was significantly higher for the experimental compared with the control surface. The survey XPS spectra detected O, C, Al, and Ti at the control group, and Ca (similar to 0.2-0.9%) and P (similar to 1.7-4.1%) besides O, C, Al, and Ti at experimental surfaces. While no statistical difference in BIC was found between experimental and control surfaces or between 2 and 4 weeks in vivo, both longer time and use of experimental surface significantly increased resistance to failure. Conclusions: The experimental surface resulted in enhanced biomechanical fixation but comparable BIC relative to control, suggesting higher bone mechanical properties around the experimental implants.

Dried Tomato-Flavored Probiotic Cream Cheese with Lactobacillus paracasei

A dried tomato-flavored probiotic cream cheese (P) containing Lactobacillus paracasei Lpc-37 was developed for the purpose of this study. The same product, but without probiotic addition (C) was used as control. Lactococcus lactis subsp. lactis and Lactococcus lactis subsp. cremoris were used as lactic starter cultures. Chemical composition analyses and sensory tests were performed on days 1 and 7, respectively. Titratable acidity, pH value and L. paracasei population were determined every 7 d during the refrigerated storage (21 d) of the cream cheeses. The experiment and analyses were performed in triplicate, using standard methods. Probiotic population remained greater than 10(7) CFU/g throughout the storage period, thereby characterizing the product as potentially probiotic. Cream cheeses C and P did not differ on the sensory tests, both obtaining good overall acceptance by the consumers, of which 82.6% stated that they certainly or probably would buy the product.

Probiotic cheese attenuates exercise-induced immune suppression in Wistar rats

Intense physical activity results in a substantial volume of stress and hence a significant probability of immunosuppression in athletes, with milk proteins being, perhaps, the most recommended protein supplements. Consumption of a probiotic cheese can attenuate immune suppression induced by exhausting exercise in rats. A popular Brazilian fresh cheese (Minas Frescal cheese) containing Lactobacillus acidophilus LA14 and Bifidobacterium longum BL05 was fed for 2 wk to adult Wistar rats, which then were brought to exhaustion on the treadmill. Two hours after exhaustion, the rats were killed and material was collected for the determination of serum uric acid, total and high-density lipoprotein cholesterol fraction, total protein, triacylglycerols, aspartate aminotransferase, alanine aminotransferase, creatine kinase, and blood cell (monocyte, lymphocyte, neutrophil, and leukocyte) counts. Exercise was efficient in reducing lymphocyte counts, irrespective of the type of ingested cheese, but the decrease in the group fed the probiotic cheese was 22% compared with 48% in the animals fed regular cheese. Monocyte counts were unaltered in the rats fed probiotic cheese compared with a significant decrease in the rats fed the regular cheese. Most importantly, ingestion of the probiotic cheese resulted in a >100% increase in serum high-density lipoprotein cholesterol and a 50% decrease in triacylglycerols. We conclude that probiotic Minas Reseal cheese may be a viable alternative to enhance the immune system and could be used to prevent infections, particularly those related to the physical overexertion of athletes.

Effect of liposome-encapsulated nisin and bacteriocin-like substance P34 on Listeria monocytogenes growth in Minas frescal cheese

The efficacy of liposome-encapsulated nisin and bacteriocin-like substance (BLS) P34 to control growth of Listeria monocytogenes in Minas frescal cheese was investigated. Nisin and BLS P34 were encapsulated in partially purified soybean phosphatidylcholine (PC-1) and PC-1-cholesterol (7:3) liposomes. PC-1 nanovesicles were previously characterized. PC-1-cholesterol encapsulated nisin and BLS P34 presented, respectively, 218 nm and 158 nm diameters, zeta potential of -64 mV and -53 mV, and entrapment efficiency of 88.9% and 100%. All treatments reduced the population of L monocytogenes compared to the control during 21 days of storage of Minas frescal cheese at 7 degrees C. However, nisin and BLS P34 encapsulated in PC-1-cholesterol liposomes were less efficient in controlling L monocytogenes growth in comparison with free and PC-1 liposome-encapsulated bacteriocins. The highest inhibitory effect was observed for nisin and BLS P34 encapsulated in PC-1 liposomes after 10 days of storage of the product The encapsulation of bacteriocins in liposomes of partially purified soybean phosphatidylcholine may be a promising technology for the control of food-borne pathogens in cheeses. (C) 2012 Elsevier B.V. All rights reserved.

Effect of incorporation of amaranth on the physical properties and nutritional value of cheese bread

At the present celiac disease has no known cure, and its only treatment is a strict lifelong adherence to a gluten-free diet. Cheese bread is a traditional Brazilian product and a safe option for celiacs. However, like other gluten-free breads, it has inherent low levels of fibers and minerals. The objective of this study was to evaluate the effect of incorporation of whole amaranth flour on the physical properties and nutritional value of cheese bread. Amaranth flour was incorporated at 10, 15, and 20% proportions in different formulations. The increasing amaranth levels darkened the product, reduced specific volume, and increased compression force. Ten percent amaranth-content cheese breads exhibited slight differences in physical properties compared with the controls. These results demonstrated the possibility of incorporating 10% of whole amaranth flour in the formulation of cheese bread resulting in a product with higher dietary fiber and iron contents and the same level of acceptance as that of the conventional formulation. The aim of this approach is to increase the availability of gluten-free bakery products with added nutritional value contributing to increase the variety of the diet of celiac patients.

Optical storage in azobenzene-containing epoxy polymers processed as Langmuir Blodgett films

In this study, azocopolymers containing different main-chain segments have been synthesized with diglycidyl ether of bisphenol A (DGEBA, DER 332, n=0.03) and the azochromophore Disperse Orange 3 (DO3) cured with twomonoamines, viz. benzylamine (BA) and m-toluidine (MT). The photoinduced birefringence was investigated in films produced with these azopolymers using the spin coating (SC) and Langmuir Blodgett (LB) techniques. In the LB films, birefringence increased with the content of azochromophore and the film thickness, as expected. The nanostructured nature of the LB films led to an enhanced birefringence and faster dynamics in the writing process, compared to the SC films. In summary, the combination of azocopolymers and the LBmethod may allow materials with tuned properties for various optical applications, including in biological systems were photoisomerization may be used to trigger actions such as drug delivery.