Microwave Hydrothermal Synthesis and Photocatalytic Performance of ZnO and M:ZnO Nanostructures (M = V, Fe, Co)

ZnO and doped M:ZnO (M = V, Fe and Co) nanostructures were synthesized by microwave hydrothermal synthesis using a low temperature route without addition of any surfactant. The transition metal ions were successfully doped in small amount (3% mol) into ZnO structure. Analysis by X-ray diffraction reveals the formation of ZnO with the hexagonal (wurtzite-type) crystal structure for all the samples. The as-obtained samples showed a similar flower-like morphology except for Fe:ZnO samples, which presented a plate-like morphology. The photocatalytic performance for Rhodamine B (RhB) degradation confirmed that the photoactivity of M:ZnO nanostructures decreased for all dopants in structure, according to their eletronegativity. Photoluminescence spectroscopy was employed to correlate M:ZnO structure with its photocatalytical properties. It was suggested that transition metal ions in ZnO lattice introduce defects that act as trapping or recombination centers for photogenerated electrons and holes, making it impossible for them reach the surface and promote the photocatalytical process.

Lamb mode diversity imaging fornon-destructivetesting of plate-likestructures

Several Lamb wave modes can be coupled to a particular structure, depending on its geometry and transducer used to generate the guided waves. Each Lamb mode interacts in a particular form with different types of defects, like notches, delamination, surface defects, resulting in different information which can be used to improve damage detection and characterization. An image compounding technique that uses the information obtained from different propagation modes of Lamb waves for non-destructive testing of plate-like structures is proposed. A linear array consisting of 16 piezoelectric elements is attached to a 1 mm thickness aluminum plate, coupling the fundamental A0 and SO modes at the frequencies of 100 kHz and 360 kHz, respectively. For each mode two images are obtained from amplitude and phase information: one image using the Total Focusing Method (TFM) and one phase image obtained from the Sign Coherence Factor (SCF). Each TFM image is multiplied by the SCF image of the respective mode to improve contrast and reduce side and grating lobes effects. The high dispersive characteristic of the A0 mode is compensated for adequate defect detection. The information in the SCF images is used to select one of the TFM mode images, at each pixel, to obtain the compounded image. As a result, dead zone is reduced, resolution and contrast are improved, enhancing damage detection when compared to the use of only one mode. (C) 2013 Elsevier Ltd. All rights reserved. (AU)

Skeletal development in the fossorial gymnophthalmids Calyptommatus sinebrachiatus and Nothobachia ablephara

The development of the cartilaginous and bony elements that form the skull and axial and appendicular skeleton is described in detail for the post-ovipositional embryonic development of the fossorial gymnophthalmid species Calyptommatus sinebrachiatus and Nothobachia ablephara. Both species have a snake-like morphology, showing an elongated body and reduced or absent limbs, as well as modifications in skull bones for burrowing, such as complex articulation surfaces and development of bony extensions that enclose and protect the brain. Similar morphological changes have originated independently in several squamate groups, including the one that led to the snake radiation. This study characterizes the patterns of chondrogenesis and osteogenesis, with special emphasis on the features associated with the burrowing habit, and may be used for future comparative analyses of the developmental patterns involved in the origin of the convergent serpentiform morphologies. (C) 2012 Elsevier GmbH. All rights reserved.

Mesenchymal stem cells from umbilical cord blood: parameters for isolation, characterization and adipogenic differentiation

Isolation of mesenchymal stem cells (MSCs) from umbilical cord blood (UCB) from full-term deliveries is a laborious, time-consuming process that results in a low yield of cells. In this study we identified parameters that can be helpful for a successful isolation of UCB-MSCs. According to our findings, chances for a well succeeded isolation of these cells are higher when MSCs were isolated from UCB collected from normal full-term pregnancies that did not last over 37 weeks. Besides the duration of pregnancy, blood volume and storage period of the UCB should also be considered for a successful isolation of these cells. Here, we found that the ideal blood volume collected should be above 80 mL and the period of storage should not exceed 6 h. We characterized UCB-MSCs by morphologic, immunophenotypic, protein/gene expression and by adipogenic differentiation potential. Isolated UCB-MSCs showed fibroblast-like morphology and the capacity of differentiating into adipocyte-like cells. Looking for markers of the undifferentiated status of UCB-MSCs, we analyzed the UCB-MSCs' protein expression profile along different time periods of the differentiation process into adipocyte-like cells. Our results showed that there is a decrease in the expression of the markers CD73, CD90, and CD105 that correlates to the degree of differentiation of UCB-MSCs We suggest that CD90 can be used as a mark to follow the differentiation commitment degree of MSCs. Microarray results showed an up-regulation of genes related to the adipogenesis process and to redox metabolism in the adipocyte-like differentiated MSCs. Our study provides information on a group of parameters that may help with successful isolation and consequently with characterization of the differentiated/undifferentiated status of UCB-MSCs, which will be useful to monitor the differentiation commitment of UCB-MSC and further facilitate the application of those cells in stem-cell therapy.

Effect of different surfactants on the shape, growth and photoluminescence behavior of MnWO4 crystals synthesized by the microwave-hydrothermal method

In this communication, we report the effect of different surfactants [cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and sodium bis(2-ethylhexyl)sulfosuccinate (AOT)] on the shape, growth and photoluminescence (PL) behavior of manganese tungstate (MnWO4) crystals synthesized by the microwave-hydrothermal (MH) method at 413 K for 45 min. These crystals were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), ultraviolet-visible (UV-vis) absorption spectroscopy and PL measurements. XRD patterns proved that these crystals have a monoclinic structure. FE-SEM images showed that MnWO4 crystals exhibit different shapes and growth mechanisms depending on the surfactant employed. The CTAB cationic surfactant promotes the hindrance of small nuclei that leads to the formation of flake-like nanocrystals, while SDS and AOT anionic surfactants promote a growth of crystals to plate-like and leaf-like crystals due to considerable size effect of counter-ions (RSO4- and RSO2O-) and an increase in Na+ ion remnants. UV-vis absorption spectroscopy revealed different optical band gap values due to modifications in the shape, surface and crystal size. Finally, the effect of surfactants on the crystal shapes and average crystal size distribution causing changes in the PL behavior of MnWO4 crystals was explained. (C) 2011 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.

SnO2 nanocrystals synthesized by microwave-assisted hydrothermal method: towards a relationship between structural and optical properties

The exploration of novel synthetic methodologies that control both size and shape of functional nanostructure opens new avenues for the functional application of nanomaterials. Here, we report a new and versatile approach to synthesize SnO2 nanocrystals (rutile-type structure) using microwave-assisted hydrothermal method. Broad peaks in the X-ray diffraction spectra indicate the nanosized nature of the samples which were indexed as a pure cassiterite tetragonal phase. Chemically and physically adsorbed water was estimated by TGA data and FT-Raman spectra to account for a new broad peak around 560 cm(-1) which is related to defective surface modes. In addition, the spherical-like morphology and low dispersed distribution size around 3-5 nm were investigated by HR-TEM and FE-SEM microscopies. Room temperature PL emission presents two broad bands at 438 and 764 nm, indicating the existence of different recombination centers. When the size of the nanospheres decreases, the relative intensity of 513 nm emission increases and the 393 nm one decreases. UV-Visible spectra show substantial changes in the optical absorbance of crystalline SnO2 nanoparticles while the existence of a small tail points out the presence of localized levels inside the forbidden band gap and supplies the necessary condition for the PL emission.

beta-ZnMoO4 microcrystals synthesized by the surfactant-assisted hydrothermal method: Growth process and photoluminescence properties

In this communication, we investigate the effect of different surfactants: cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and polyvinylpyrrolidone (PVP-K40) on the growth process of zinc molybdate (beta-ZnMoO4) microcrystals synthesized under hydrothermal conditions at 140 degrees C for 8 h. These microcrystals were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL) measurements. XRD patterns proved that these crystals are monophasic and present a wolframite-type monoclinic structure. FE-SEM images revealed that the surfactants modified the crystal shapes, suggesting the occurrence of distinct crystal growth processes. The CTAB cationic surfactant promotes the hindrance of small nuclei that leads to the formation of rectangle-like crystals, SDS anionic surfactant induces a growth of irregular hexagons with several porous due to considerable size effect of counter-ions on the crystal facets, PVP-K40 non-ionic surfactant allows a reduction in size and thickness of plate-like crystals, while without surfactants have the formation of irregular plate-like crystals. Finally, the PL properties of beta-ZnMoO4 microcrystals were explained by means of different shape/size, surface defects and order-disorder into lattice. (C) 2011 Elsevier B.V. All rights reserved.

Morphology of the Gas Bladder in Sea Catfishes (Siluriformes: Ariidae)

The morphology of the gas bladder and associated structures in sea catfishes (Siluriformes: Ariidae) is studied. The most simple gas bladder, exclusive to Galeichthys Valenciennes, is apple-shaped with weakly developed internal trabeculae, has smooth walls externally and a short Mullerian window associated with a broad, short Mullerian ramus that is firmly attached to Baudelot`s ligament and supracleithrum. Most genera of Ariidae have a cordiform bladder with well-developed trabeculae, smooth walls externally, an elongate Mullerian window and an elongate Mullerian ramus with an acute tip that is free from the Baudelot`s ligament and supracleithrum. Sciades proops (Valenciennes) and S. parkeri (Traill) have a similar gas bladder but with a well-developed secondary chamber. Other genera of Ariidae also have a cordiform bladder with well-developed trabeculae and elongate Mullerian window, but with lateral diverticula present as shallow rounded bulges or blister-like swellings along the peripheral margins of the bladder. The degree of development of lateral diverticula varies among and within species, with Osteogeneiosus Bleeker having the most highly-developed diverticula. Bagre pinnimaculatus (Steindachner) and Bagre bagre (Linnaeus) have unusual depressed gas bladders with complex network of internal trabeculae. The implications of gas bladder morphology for the taxonomy and phylogenetic relationships of the family are discussed.

Morphology of the gas bladder in thorny catfishes (Siluriformes: Doradidae)

The gross morphology of the gas bladder is described, illustrated, compared and categorized among 86 of 88 nominal valid and six undescribed species representing all 31 genera of Doradidae with comments on ontogenetic and taxonomic variation when observed. The putatively basal-most doradids exhibit an unmodified cordiform gas bladder. Derived taxa exhibit an impressive suite of modifications including the addition of a secondary bladder, pronounced reduction of the posterolateral chambers, internal trabeculae, associations with bony capsule-like expansions of the anterior (Weberian) vertebrae, and accessory diverticula varying widely in size, shape, abundance, and distribution. Intra-specific differences are minor, most often reflective of ontogenetic changes especially in large-size species, whereas inter-specific and inter-generic differences are significant, in many cases diagnostic, and suggestive of phylogenetic signal excepting instances of evident convergence such as gas bladder reduction in Rhynchodoras and all but one species of Leptodoras.

Morphological heterogeneity of Paracoccidioides brasiliensis: relevance of the Rho-like GTPase PbCDC42

Paracoccidioides brasiliensis budding pattern and polymorphic growth were previously shown to be closely linked to the expression of PbCDC42 and to influence the pathogenesis of the fungus. In this work we conducted a detailed morphogenetic evaluation of the yeast-forms of 11 different clinical and environmental P. brasiliensis isolates comprising four phylogenetic lineages (S1, PS2, PS3 and Pb01-like), as well as a PbCDC42 knock-down strain. High variations in the shape and size of mother and bud cells of each isolate were observed but we did not find a characteristic morphologic profile for any of the phylogenetic groups. In all isolates studied, the bud size and shape were demonstrated to be highly dependent on the mother cell. Importantly, we found strong correlations between PbCDC42 expression and both the shape of mother and bud cells and the size of the buds in all isolates and the knock-down strain. Our results suggested that PbCDC42 expression can explain approximately 80% of mother and bud cell shape and 19% of bud cell size. This data support PbCDC42 expression level as being a relevant predictor of P. brasiliensis morphology. Altogether, these findings quantitatively describe the polymorphic nature of the P. brasiliensis yeast form and provide additional support for the key role of PbCDC42 expression on yeast cell morphology.

Germination and seedling morphology of four South American Smilax (Smilacaceae)

Species of Smilax,, also known as greenbrier, are widely distributed in Brazil and their commercial trades are carried out by the extractivism of native species. We the aim to provide information about the germination and development of seedlings in four Smilax species, different experiments were developed under controlled conditions. We evaluated two germination treatments: temperature (30 degrees C and 20-30 degrees C) and light (presence/absence), and for few cases the tetrazolium treatment was applied. A different treatment response was observed among the studied species. Light had a significant influence in S. brasiliensis, with the highest germination rates at 20-30 C in dark conditions. S. campestris showed significant differences among temperature treatments, but not to light; while S. cissoides showed high germination rates (66-78%), independently of treatment. However, S. polyantha had low germination rates (19-24%). After one year, the expanded leaves showed different characteristics among the studied species. Leaves of S. brasiliensis were ovate, coriaceous, three main veins and prickle-like structures only on the midrib on abaxial face. S. campestris leaves were oblong, coriaceous and prickle-like structures were located at the leaf midrib and margin. S. cissoides had ovate-elliptic, membranaceous leaves, with three main veins with prickle-like structures on the abaxial face. S. polyantha leaves showed ovate-elliptic. coriaceous leaves, with three main veins, translucent secondary veins and no prickle-like structures. A seedling identification key was elaborated based on morphological characteristics. Rev. Biol. Trop. 60 (1): 495-504. Epub 2012 March 01.

Repertoire, Genealogy and Genomic Organization of Cruzipain and Homologous Genes in Trypanosoma cruzi, T. cruzi-Like and Other Trypanosome Species

Trypanosoma cruzi, the agent of Chagas disease, is a complex of genetically diverse isolates highly phylogenetically related to T. cruzi-like species, Trypanosoma cruzi marinkellei and Trypanosoma dionisii, all sharing morphology of blood and culture forms and development within cells. However, they differ in hosts, vectors and pathogenicity: T. cruzi is a human pathogen infective to virtually all mammals whilst the other two species are non-pathogenic and bat restricted. Previous studies suggest that variations in expression levels and genetic diversity of cruzipain, the major isoform of cathepsin L-like (CATL) enzymes of T. cruzi, correlate with levels of cellular invasion, differentiation, virulence and pathogenicity of distinct strains. In this study, we compared 80 sequences of genes encoding cruzipain from 25 T. cruzi isolates representative of all discrete typing units (DTUs TcI-TcVI) and the new genotype Tcbat and 10 sequences of homologous genes from other species. The catalytic domain repertoires diverged according to DTUs and trypanosome species. Relatively homogeneous sequences are found within and among isolates of the same DTU except TcV and TcVI, which displayed sequences unique or identical to those of TcII and TcIII, supporting their origin from the hybridization between these two DTUs. In network genealogies, sequences from T. cruzi clustered tightly together and closer to T. c. marinkellei than to T. dionisii and largely differed from homologues of T. rangeli and T. b. brucei. Here, analysis of isolates representative of the overall biological and genetic diversity of T. cruzi and closest T. cruzi-like species evidenced DTU- and species-specific polymorphisms corroborating phylogenetic relationships inferred with other genes. Comparison of both phylogenetically close and distant trypanosomes is valuable to understand host-parasite interactions, virulence and pathogenicity. Our findings corroborate cruzipain as valuable target for drugs, vaccine, diagnostic and genotyping approaches.

Alveolar Bone Morphology in Patients With Bilateral Complete Cleft Lip and Palate in the Mixed Dentition: Cone Beam Computed Tomography Evaluation

Objectives: To verify the thickness and level of alveolar bone around the teeth adjacent to the cleft by means of cone beam computed tomography (CBCT) in patients with complete bilateral cleft lip and palate prior to bone graft surgery and orthodontic intervention. Method: The sample comprised 10 patients with complete bilateral cleft lip and palate (five boys and five girls) in the mixed dentition. The mean age was 9.5 years, and all subjects showed a G3 interarch relationship according to the Bauru index. The thickness of alveolar bone surrounding the maxillary incisors and the maxillary canines was measured in CBCT axial section using the software iCAT Xoran System. The distance between the alveolar bone crest and the cement-enamel junction (CEJ) was measured in cross sections. Results: The tomography images showed a thin alveolar bone plate around teeth adjacent to clefts. No bone dehiscence was observed in teeth adjacent to clefts during the mixed dentition. A slight increase in the distance between the alveolar bone crest and the CEJ was observed in the mesial and lingual aspects of canines adjacent to cleft. Conclusion: In patients with BCLP in the mixed dentition, teeth adjacent to the alveolar cleft are covered by a thin alveolar bone plate. However, the level of alveolar bone crest around these teeth seems to be normal, and no bone dehiscence was identified at this age.

Reprogramming of prostate cancer-associated stromal cells to embryonic stem-like

BACKGROUND CD90+ prostate cancer-associated (CP) stromal cells represent a diseased cell type found only in tumor tissue. They differ from their normal counterpart in gene expression and inductive signaling. Genetic reprogramming by induced pluripotent stem (iPS) cell technology can effectively change adult cells into stem-like cells through wholesale alteration of the gene expression program. This technology might be used to erase the abnormal gene expression of diseased cells. The resultant iPS cells would no longer express the disease phenotype, and behave like stem cells. METHODS CP stromal cells, isolated from tumor tissue of a surgically resected prostate by anti-CD90-mediated sorting and cultured in vitro, were transfected with in vitro packaged lentiviral expression vectors containing stem cell transcription factor genes POU5F1, LIN28, NANOG, and SOX2. RESULTS Alkaline phosphatase-positive iPS cells were obtained in about 3 weeks post-transfection at a frequency of 10-4. Their colony morphology was indistinguishable from that of human embryonic stem (ES) cells. Transcriptome analysis showed a virtually complete match in gene expression between the iPS and ES cells. CONCLUSIONS Genes of CP stromal cells could be fully inactivated by genetic reprogramming. As a consequence, the disease phenotype was cured. Prostate 72:14531463, 2012. (c) 2012 Wiley Periodicals, Inc.

Genital morphology of the male South American fur seal (Arctocephalus australis) and biological implications

Male capacity for spreading genes to a great number of descendents and to determine population dynamics depend directly on the genital organs. Morphological studies in pinnipeds are scarce and the functional meaning of some characteristics has never been discussed. We hypothesized that Arctocephalus australis (A. australis) shows morphophysiological adaptations in order to guarantee the perpetuation of the species in the unique annual mating season. Seven males, dead from natural causes, had their genital organs collected and fixed for morphological description. Some features differ from other described mammalian males and are closely related to the biology and reproductive cycle of this species, as the scrotal epidermis, absence of glandular portion in the ductus deferens and spermatogenic epithelium suggest a recrudescent testis period. The corona glandis exhibits a singular arrangement: its erectile border looks like a formation of petals and its association with the os penis gives a "lily-flower" form to this region. We propose the name margo petaliformis to this particular erectile border of the corona glandis because of its similarity to a flower corola. The male genital organs of A. australis show morphological features compatible with adaptation to environment requirements and reproductive efficiency.