Seafloor geological impacts associated with drilling disturbance

This study describes the sedimentological composition and morphology of the sea bottom in an area located at 902 m depth in the Campos Basin of Brazil, and compares characteristics before and after drilling activity for oil exploration. The results show no significant sedimentological variation in the area affected by drilling. The most noticeable effects were observed during the second (MD(2)) of three cruises, in terms of change to grain size distribution, total organic carbon and clay mineral composition around the Eagle well. This impact occurred over the seabed in a direction that corresponds to the near-bottom circulation pattern, predominantly northward. In the third cruise (MD3), 12 months after drilling, some recovery was observed. Side-scan sonar imaging was used to explore the extent of the area affected by drilling, and sedimentological samples from it confirmed the effects of drilling. (C) 2008 Elsevier Ltd. All rights reserved.

Tank experiments with borehole self-potential data

Despite their importance in the evaluation of petroleum and gas reservoirs, measurements of self-potential data under borehole conditions (well-logging) have found only minor applications in aquifer and waste-site characterization. This can be attributed to lower signals from the diffusion fronts in near-surface environments because measurements are made long after the drilling of the well, when concentration fronts are already disappearing. Proportionally higher signals arise from streaming potentials that prevent using simple interpretation models that assume signals from diffusion only. Our laboratory experiments found that dual-source self-potential signals can be described by a simple linear model, and that contributions (from diffusion and streaming potentials) can be isolated by slightly perturbing the borehole conditions. Perturbations are applied either by changing the concentration of the borehole-filling solution or its column height. Parameters useful for formation evaluation can be estimated from data measured during perturbations, namely, pore water resistivity, pressure drop across the borehole wall, and electrokinetic coupling parameter. These are important parameters to assess, respectively, water quality, aquifer lateral continuity, and interfacial properties of permeable formations.