39 resultados para Ouro
em Biblioteca Digital da Produção Intelectual da Universidade de São Paulo
Resumo:
Introduction: This study analyzed the occurrence and the contamination of triatomines by trypanosomatids in Orbignya speciosa (babassu) specimens in the State of Rondonia, Brazil, in two different environments (pasture and woods). Methods: Capture of triatomines on babassus and microscopic search for trypanosomatids in their digestive tube were carried out. Results: Four hundred ninety-four (494) specimens were captured (Rhodnius prolixus and R.robustus), of which 35.6% of the triatomines were positive for trypanosomatids. Conclusions: The high index of natural infection along with the abundance of triatomines points out to the necessity to create an epidemiological surveillance system to monitor vector-borne transmission and deepen the studies on the ecology of such vectors in the Amazon.
Resumo:
INTRODUCTION: This study analyzed the occurrence and the contamination of triatomines by trypanosomatids in Orbignya speciosa (babassu) specimens in the State of Rondônia, Brazil, in two different environments (pasture and woods). METHODS: Capture of triatomines on babassus and microscopic search for trypanosomatids in their digestive tube were carried out. RESULTS: Four hundred ninety-four (494) specimens were captured (Rhodnius prolixus and R.robustus), of which 35.6% of the triatomines were positive for trypanosomatids. CONCLUSIONS: The high index of natural infection along with the abundance of triatomines points out to the necessity to create an epidemiological surveillance system to monitor vector-borne transmission and deepen the studies on the ecology of such vectors in the Amazon.
Resumo:
This article discusses the adsorption kinetics of a L-cysteine monolayer onto a gold surface by means of information obtained through the QCM technique. The results indicate that the adsorption process is rapid and follows the Langmuir isotherm, in which adsorption and desorption are considered. From these measurements the following parameter values were obtained: k d = (4.2 ± 0.4) x 10-3 s-1, k a = 75 ± 6 M-1 s-1, Keq=(1.8 ± 0.3) x 10(4) M-1 and ΔGads = - (5.8 ± 0.2) kcal mol-1.
Resumo:
Myrtaceae é uma das famílias mais representativas da flora brasileira, fato que não tem sido acompanhado por um número expressivo de trabalhos taxonômicos. O presente estudo teve como objetivo realizar o tratamento taxonômico para a família na Serra do Ouro Branco, o ponto mais ao sul da Serra do Espinhaço. Foram registrados 10 gêneros e 24 espécies para a região: Accara (1 sp.), Blepharocalyx (1 sp.), Calyptranthes (2 spp.), Campomanesia (2 spp.), Eugenia (2 spp.), Marlierea (2 spp.), Myrceugenia (2 spp.), Myrcia (10 spp.), Psidium (1 sp.), Siphoneugena (1 sp.). São apresentados chaves de identificação, descrições e comentários sobre gêneros e espécies.
Resumo:
This work reviews the fundamentals of three important techniques currently used to dimension thickeners: Flux of Solids, Talmadge-Fitch, and Roberts. They were applied to validate the calculation of diameter (D) and sedimentation area (A) of a real thickener, which clarifies brine in a plant located at Cubatao-SP. The calculation of thickener dimension (A and D) was based on the sedimentation behavior of salt particles in brine on a laboratory scale. The values of D and A (D=13,9-14,1m; A=151,7-156,1m(2)), which were calculated by the three techniques, were compared with the diameter of the real equipment (D=20,0m). On the other hand, corrected values of D and A (D=18,1-18,3m; A=257, 0-263, 0m(2)) were obtained by using a scale factor (f=1,3). These results are 10% lower than the real equipment.
Resumo:
Purpose: The objective of this study was to compare the estimated cost of clinical and surgical treatment for basl cell carcinoma of the eyelid. Methods: This was a pilot study of 12 patients with basal cell carcinoma receiving treatment with 5% imiquimod cream at the ocular plastic surgery center, medical school University of Sao Paulo (HC-FMUSP, Brazil). The cost of clinical treatment was estimated based on the time of treatment and amount of medication consumed by patients in the home setting. The cost of surgical treatment was estimated by ophthalmologists with experience in reconstructive plastic surgery based on analysis of images of the same patients. Surgeons responded to a questionnaire with four questions about surgical technique, surgical materials required, estimated duration of surgery and type of anesthesia. Results: Immunotherapy lasted from 8 to 12 weeks. All patients reported each cold-stored sachet with 5% imiquimod cream lasted 3 days. According to the institution, a box with 12 sachets costs BRL 480.00. Patients required 1.58-3.11 boxes for complete treatment, corresponding to a total cost of BRL 758.40-1,492.80. Based on image analysis, surgeons evaluated surgery would require 1-3 hours. The estimated cost of surgery room and staff was BRL 263.00, to which the cost of supplies was added. Thus, the total cost of surgical treatment was BRL 272.61-864.82. On the average, immunotherapy was 57,64% more costly than surgical treatment. Conclusions: Malignant eyelid tumors are a common finding in clinical ophthalmology. Surgery is still the treatment of choice at our institution, but immunotherapy with 5% imiquimod cream may be indicated for patients with multiple lesions or high surgical risk and for patients declining surgery for reasons of fear or esthetic concerns. The ability to estimate costs related to the treatment of malignant eyelid tumors is an important aid in the financial planning of health care institutions. Further studies should evaluate the possibility of institutions equating the cost of immunotherapy and surgical treatment by acquiring similar but less expensive medications.
Resumo:
OBJETIVO: Determinar a taxa de sucesso da broncoscopia flexível como primeira opção na remoção de corpos estranhos das vias aéreas em adultos. MÉTODOS: Estudo retrospectivo de todos os pacientes adultos (acima de 18 anos) com aspiração de corpo estranho submetidos a broncoscopia no Hospital das Clínicas, Faculdade de Medicina da Universidade de São Paulo, em São Paulo (SP). RESULTADOS: A amostra foi constituída por 40 pacientes adultos, com média de idade de 52 anos (variação: 18-88 anos). A mediana do tempo de permanência do corpo estranho na via aérea foi de 15 dias (variação: 12 h a 10 anos). Todos os pacientes foram submetidos primeiramente a broncoscopia flexível diagnóstica. A retirada do corpo estranho por meio de broncoscopia flexível foi bem-sucedida em 33 dos pacientes (82,5%). Em 1 paciente, um objeto metálico alojado na árvore brônquica distal requereu o uso de fluoroscopia. Seis pacientes (15%) foram submetidos a broncoscopia rígida devido a dispneia induzida por corpo estranho traqueal, em 2, e porque o corpo estranho era muito grande para as pinças flexíveis, em 4. A broncoscopia falhou em apenas 1 paciente, que portanto necessitou de broncotomia. CONCLUSÕES: Embora a broncoscopia rígida seja considerada o padrão ouro na remoção de corpos estranhos na via aérea, nossa experiência mostrou que a broncoscopia flexível pode ser utilizada segura e eficientemente no diagnóstico e tratamento de pacientes adultos estáveis.
Resumo:
The exceptional advance of information technology and computer application to the mineral sector has allowed the automation of several processes of the mineral value chain. ERP systems (Enterprise Resource Planning) provided the platform for the efficient integration of all support activities of the mineral value chain. Despite all advances gathered with the application of computers, it was not possible to date, to effectively integrate the primary activities of the mineral value chain. The main reason for that are the uncertainties present in the productive process, which are intrinsic to the business, and the difficulty to quantify and qualify the benefits obtained with this integration due to the lack of a clear definition of the key performance indicators (KPIs). This work presents an analysis of the ERP systems application in Brazilian mining, identifies the KPIs of some of the most important Brazilian mining companies, and discusses the importance of mapping and measuring these indicators for the effective. management of the mining business.
Resumo:
Two new records of Anopheles homunculus in the eastern part of the Atlantic Forest are reported. This species was found for the first time in Barra do Ouro district, Maquine municipality, Rio Grande do Sul state, located in the southern limit of the Atlantic Forest. The 2nd new record was in the Serra Bonita Reserve, Camacan municipality, southeast Bahia state. These records extend the geographical distribution of An. homunculus, suggesting that the species may be widely distributed in coastal areas of the Atlantic Forest. It is hypothesized that the disjunct distribution of the species may be caused by inadequate sampling, and also difficulties in species identification based only on female external characteristics. Species identification was based on morphological characters of the male, larva, and pupa, and corroborated by DNA sequence analyses, employing data from both 2nd internal transcribed spacer of nuclear ribosomal DNA and of mitochondrial cytochrome c oxidase subunit I.
Resumo:
The aim of this study was to investigate the bauxite scrubbing process on samples from Miltonia 3, a Vale operation in the State of Para, Brazil. The experimental program included the design of a standard laboratory test, from which parameters were derived for predicting the operation of a scrubber in steady state conditions. Three main variables were selected for the laboratory experimental program using the factorial design technique. These were load fraction, residence time and rotation speed. The amount of fines was determined through screening both the feed and the product of the scrubbing test. The former was considered to be a characteristic material, while the second was the dependent variable, i.e. the result of the scrubbing process. According to experiments, the load fraction was the most important variable for the scrubbing process.
Resumo:
This paper presents the classification of 110 copper ore samples from Sossego Mine, based on X-ray diffraction and cluster analysis. The comparison based on the position and the intensity of the diffracted peaks allowed the distinction of seven ore types, whose differences refer to the proportion of major minerals: quartz, feldspar, actinolite, iron oxides, mica and chlorite. There was a strong correlation between the grouping and the location of the samples in Sequeirinho and Sossego orebodies. This relationship is due to different types and intensities of hydrothermal alteration prevailing in each body, which reflect the mineralogical composition and thus the X-ray diffractograms of samples.
Resumo:
Mining operations around the world make extensive use of blasthole sampling for short-term planning, which has two undisputed advantages: (1) blastholes are closely spaced providing relatively high sampling density per ton, and (2) there is no additional cost since the blastholes must be drilled anyway. However, blasthole sampling usually presents poor sampling precision, and the inconstant sampling bias caused by particle size and density segregation is an even more serious problem, generally precluding representativeness. One of the main causes of this bias is a highly varying loss of fines, which can lead to both under- and over-estimation of grade depending on the ore type and the gangue. This study validates a new, modified sectorial sampler, designed to reduce the loss of fines and thereby increase sampling accuracy for narrow-diameter blasthole sampling. First results show a significantly improved estimation of gold grade as well as the minimization of the loss of fines.
Resumo:
O objetivo desse trabalho é apresentar e discutir a determinação dos parâmetros de dispersão de ar em células mecânicas de flotação, em circuitos industriais brasileiros. Foram investigados os circuitos rougher e scavenger das usinas RPM, Taquari-Vassouras, Copebras e Fosfértil-Catalão (atual Vale Fertilizantes). Nas usinas RPM e Taquari-Vassouras, foram determinados a velocidade superficial do ar (Jg), o hold-up do ar (εg), o diâmetro médio de bolhas (d32) e o fluxo de área superficial de bolhas (Sb). Para as outras usinas, foram determinados somente o Jg e εg. Os resultados mostraram que, com exceção da RPM, todos os circuitos investigados apresentaram baixos valores para os parâmetros de dispersão do ar. Taquari-Vassouras apresentou os mais baixos valores médios para Jg e εg, respectivamente, 0,05 cm/s e 5%. Os maiores valores de Jg foram determinados no circuito rougher da Copebras, 1,17 cm/s, ao passo que a RPM apresentou os maiores valores para o hold-up e tamanho de bolha, respectivamente, 31% e 2,61mm. Os valores obtidos, para Sb, situaram-se abaixo daqueles reportados na literatura.