Effects of strength and power training on neuromuscular adaptations and jumping movement pattern and performance

Effects of strength and power training on neuromuscular adaptations and jumping movement pattern and performance. J Strength Cond Res 26(12): 3335-3344, 2012-This study aimed at comparing the effects of strength and power training (ST and PT) regimens on neuromuscular adaptations and changes on vertical jump performance, kinetics, and kinematics parameters. Forty physically active men (178.2 +/- 7.0 cm; 75.1 +/- 8.6 kg; 23.6 +/- 3.5 years) with at least 2 years of ST experience were assigned to an ST (n = 14), a PT (n = 14), or a control group (C; n = 12). The training programs were performed during 8 weeks, 3 times per week. Dynamic and isometric maximum strength, cross-sectional area, and muscle activation were assessed before and after the experimental period. Squat jump (SJ) and countermovement jump (CMJ) performance, kinetics, and kinematics parameters were also assessed. Dynamic maximum strength increased similarly (p < 0.05) for the ST (22.8%) and PT (16.6%) groups. The maximum voluntary isometric contraction increased for the ST and PT groups (p < 0.05) in the posttraining assessments. There was a main time effect for muscle fiber cross-sectional area (p < 0.05), but there were no changes in muscle activation. The SJ height increased, after ST and PT, because of a faster concentric phase and a higher rate of force development (p < 0.05). The CMJ height increased only after PT (p < 0.05), but there were no significant changes in its kinetics and kinematics parameters. In conclusion, neuromuscular adaptations were similar between the training groups. The PT seemed more effective than the ST in increasing jumping performance, but neither the ST nor the PT was able to affect the SJ and the CMJ movement pattern (e.g., timing and sequencing of joint extension initiation).

Learned helplessness in the rat: Effect of response topography in a within-subject design

Three experiments investigated learned helplessness in rats manipulating response topography within-subject and different intervals between treatment and tests among groups. In Experiment 1, rats previously exposed to inescapable shocks were tested under an escape contingency where either jumping or nose poking was required to terminate shocks: tests were run either 1, 14 or 28 days after treatment. Most rats failed to jump, as expected, but learned to nose poke, regardless of the interval between treatment and tests and order of testing. The same results were observed in male and female rats from a different laboratory (Experiment 2) and despite increased exposure to the escape contingencies using a within-subject design (Experiment 3). Furthermore, no evidence of helplessness reversal was observed, since animals failed to jump even after having learned to nose-poke in a previous test session. These results are not consistent with a learned helplessness hypothesis, which claims that shock (un)controllability is the key variable responsible for the effect. They are nonetheless consistent with the view that inescapable shocks enhance control by irrelevant features of the relationship between the environment and behavior. (C) 2010 Elsevier B.V. All rights reserved.

Homology in a context dependent predatory behavior in spiders (Araneae)

Stereotyped behaviors have been routinely used as characters for phylogeny inference, but the same cannot be said of the plastic aspects of performance, which routinely are taken as a result of ecological processes. In this paper we examine the evolution of one of these plastic behavioral phenotypes, thus fostering a bridge between ecological and evolutionary processes. Foraging behavior in spiders is context dependent in many aspects, since it varies with prey type and size, spider nutritional and developmental state, previous experience and, in webweavers, is dependent on the structure of the web. Reeling is a predatory tactic typical of cobweb weavers (Theridiidae), in which the spider moves the prey toward her by pulling the capture thread (gumfoot) to which it is adhered. Predatory reeling is dependent on the gumfoot for its expression, and has not been previously reported in orbweavers. In order to investigate the evolution of this web dependent behavior, we built artificial, pseudogumfoot lines in orbwebs and registered parameters of the predatory tactics in this modified web. Aspects of the predatory tactics of 240 individuals (12 species in 4 families) were measured, and the resulting data were optimized on the phylogeny of Orbiculariae. All species perform predatory reeling with the pseudogumfoot lines. Thus, predatory reeling is homologous for the whole Orbiculariae group. In nature, holes made by insects in ecribellate orbs produce pseudogumfoot lines (similar to out experimentally modified webs), and thus reeling occurred naturally in ecribellates. Nevertheless, outside lab conditions, predatory reeling does not occur among cribellate orbweavers, so that this behavior could not have been selected for in the cribellate ancester of orbweavers. Cribellate spiders are flexible enough as to present novel and adaptive predatory responses (reeling) even when exposed for the first time to conditions outside their usual environment. Thus, the evolution of reeling suggests and alternative mechanism for the production of evolutionary novelties; that is, the exploration of unusual ecological conditions and of the regular effects these abnormal conditions have on phenotype expression.

Graphene modification with gold nanoparticles using the gas aggregation technique

Gold nanoparticles (Au-NPs) were deposited on single layer graphene (SLG) and few layers graphene (FLG) by applying the gas aggregation technique, previously adapted to a 4-gun commercial magnetron sputtering system. The samples were supported on SiO2 (280 nm)/Si substrates, and the influence of the applied DC power and deposition times on the nanoparticle-graphene system was investigated by Confocal Raman Microscopy. Analysis of the G and 2D bands of the Raman spectra shows that the integrated intensity ratio (I-2D/I-G) was higher for SLG than for FLG. For the samples produced using a sputtering power of 30W, the intensity (peak height) of the G and 2D bands increased with the deposition time, whereas for those produced applying 60W the peak heights of the G and 2D bands decreased with the deposition time. This behaviour was ascribed to the formation of larger Au-NPs aggregates in the last case. A significant increase of the Full Width Half Maximum (FWHM) of the G band for SLG and FLG was also observed as a function of the DC power and deposition time. Surprisingly, the fine details of the Raman spectra revealed an unintentional doping of SLG and FLG accompanying the increase of size and aggregation of the Au-NPs. (C) 2011 Elsevier B.V. All rights reserved.

The filler content of the dental composite resins and their influence on different properties

The purpose of this study was to compare the inorganic content and morphology of one nanofilled and one nanohybrid composite with one universal microhybrid composite. The Vickers hardness, degree of conversion and scanning electron microscope of the materials light-cured using LED unit were also investigated. One nanofilled (Filtek (TM) Supreme XT), one nanohybrid (TPH (R) 3) and one universal microhybrid (Filtek (TM) Z-250) composite resins at color A2 were used in this study. The samples were made in a metallic mould (4 mm in diameter and 2 mm in thickness). Their filler weight content was measured by thermogravimetric analysis (TG). The morphology of the filler particles was determined using scanning electron microscope equipped with a field emission gun (SEM-FEG). Vickers hardness and degree of conversion using FT-IR spectroscopy were measured. Filtek (TM) Z-250 (microhybrid) composite resin shows higher degree of conversion and hardness than those of Filtek (TM) Supreme XT (nanofilled) and TPH (R) 3 (nanohybrid) composites, respectively. The TPH3 (R) (nanohybrid) composite exhibits by far the lowest mechanical property. Nanofilled composite resins show mechanical properties at least as good as those of universal hybrids and could thus be used for the same clinical indications as well as for anterior restorations due to their high aesthetic properties. Microsc. Res. Tech. 75:758765, 2012. (C) 2011 Wiley Periodicals, Inc

Sexual Differences in the Behavior of the Harvestman Leiobunum vittatum (Opiliones, Sclerosomatidae) Towards Conspecific Cues

Preliminary observations of the harvestman Leiobunum vittatum found that individuals rub their bodies against the substrate, presenting the possibility of chemical marking. To determine whether or not L. vittatum individuals can detect substrate-borne chemical cues, we compared responses of L. vittatum males and females to substrate-borne male and female cues. We found that individuals of L. vittatum do respond to conspecific cues and that their responses are sex-specific. In response to substrate-borne conspecific cues, male L. vittatum spent more time, engaged in more scraping with their sensory legs I, and engaged in pedipalpal tapping more often in the presence versus absence of conspecific cues (male and female equally). Furthermore, in the presence of conspecific cues, males engaged in two behaviors never observed in females-(a) "fast approach" and (b) "jerking", the latter of which was never observed in the presence of cricket cues. In contrast to males, females did not spend more time on conspecific cues, but did spend more time tapping their pedipalps in the presence of male vs female cues, suggesting an ability to distinguish between them. A final experiment explored the possibility that females could discriminate among males of varying histories of agonistic interactions based upon their chemical cues. We found no support for this hypothesis. Our results demonstrate that L. vitattum do respond to conspecific cues, and introduce the possibility that intraspecific communication may be mediated in part by chemical cues.

Parameter recovery for a skew-normal IRT model under a Bayesian approach: hierarchical framework, prior and kernel sensitivity and sample size

Item response theory (IRT) comprises a set of statistical models which are useful in many fields, especially when there is an interest in studying latent variables (or latent traits). Usually such latent traits are assumed to be random variables and a convenient distribution is assigned to them. A very common choice for such a distribution has been the standard normal. Recently, Azevedo et al. [Bayesian inference for a skew-normal IRT model under the centred parameterization, Comput. Stat. Data Anal. 55 (2011), pp. 353-365] proposed a skew-normal distribution under the centred parameterization (SNCP) as had been studied in [R. B. Arellano-Valle and A. Azzalini, The centred parametrization for the multivariate skew-normal distribution, J. Multivariate Anal. 99(7) (2008), pp. 1362-1382], to model the latent trait distribution. This approach allows one to represent any asymmetric behaviour concerning the latent trait distribution. Also, they developed a Metropolis-Hastings within the Gibbs sampling (MHWGS) algorithm based on the density of the SNCP. They showed that the algorithm recovers all parameters properly. Their results indicated that, in the presence of asymmetry, the proposed model and the estimation algorithm perform better than the usual model and estimation methods. Our main goal in this paper is to propose another type of MHWGS algorithm based on a stochastic representation (hierarchical structure) of the SNCP studied in [N. Henze, A probabilistic representation of the skew-normal distribution, Scand. J. Statist. 13 (1986), pp. 271-275]. Our algorithm has only one Metropolis-Hastings step, in opposition to the algorithm developed by Azevedo et al., which has two such steps. This not only makes the implementation easier but also reduces the number of proposal densities to be used, which can be a problem in the implementation of MHWGS algorithms, as can be seen in [R.J. Patz and B.W. Junker, A straightforward approach to Markov Chain Monte Carlo methods for item response models, J. Educ. Behav. Stat. 24(2) (1999), pp. 146-178; R. J. Patz and B. W. Junker, The applications and extensions of MCMC in IRT: Multiple item types, missing data, and rated responses, J. Educ. Behav. Stat. 24(4) (1999), pp. 342-366; A. Gelman, G.O. Roberts, and W.R. Gilks, Efficient Metropolis jumping rules, Bayesian Stat. 5 (1996), pp. 599-607]. Moreover, we consider a modified beta prior (which generalizes the one considered in [3]) and a Jeffreys prior for the asymmetry parameter. Furthermore, we study the sensitivity of such priors as well as the use of different kernel densities for this parameter. Finally, we assess the impact of the number of examinees, number of items and the asymmetry level on the parameter recovery. Results of the simulation study indicated that our approach performed equally as well as that in [3], in terms of parameter recovery, mainly using the Jeffreys prior. Also, they indicated that the asymmetry level has the highest impact on parameter recovery, even though it is relatively small. A real data analysis is considered jointly with the development of model fitting assessment tools. The results are compared with the ones obtained by Azevedo et al. The results indicate that using the hierarchical approach allows us to implement MCMC algorithms more easily, it facilitates diagnosis of the convergence and also it can be very useful to fit more complex skew IRT models.

Carbon nanotubes modified with antimony nanoparticles: A novel material for electrochemical sensing

In this study, a novel material for the electrochemical determination of bisphenol A using a nanocomposite based on multi-walled carbon nanotubes modified with antimony nanoparticles has been investigated. The morphology, structure, and electrochemical performance of the nanocomposite electrodes were characterised by field emission gun scanning electron microscopy, energy-dispersive X-ray spectroscopy, and cyclic voltammetry. A scan rate study and electrochemical impedance spectroscopy showed that the bisphenol A oxidation product is adsorbed on nanocomposite electrode surface. Differential pulse voltammetry in phosphate buffer solution at pH 6, allowed the development of a method to determine bisphenol A levels in the range of 0.5-5.0 mu mol L-1, with a detection limit of 5.24 nmol L-1 (1.19 mu g L-1). (C) 2012 Elsevier Ltd. All rights reserved.

Evolution of form and function: morphophysiological relationships and locomotor performance in tropidurine lizards

Locomotor capacity is often considered an excellent measure of whole animal performance because it requires the integrated functioning of many morphological, physiological (and biochemical) traits. However, because studies tend to focus on either structural or functional suits of traits, we know little on whether and how morphological and physiological traits coevolve to produce adequate locomotor capacities. Hence, we investigate the evolutionary relationships between morphological and physiological parameters related to exercise physiology, using tropidurine lizards as a model. We employ a phylogenetic principal component analysis (PCA) to identify variable clusters (factors) related to morphology, energetic metabolism and muscle metabolism, and then analyze the relationships between these clusters and measures of locomotor performance, using two models (star and hierarchical phylogenies). Our data indicate that sprint performance is enhanced by simultaneous evolutionary tendencies affecting relative limb and tail size and physiological traits. Specifically, the high absolute sprint speeds exhibited by tropidurines from the sand dunes are explained by longer limbs, feet and tails and an increased proportion of glycolytic fibers in the leg muscle, contrasting with their lower capacity for overall oxidative metabolism [principal component (PC1)]. However, when sprint speeds are corrected for body size, performance correlates with a cluster (PC3) composed by moderate loads for activity metabolic rate and body size. The simultaneous measurement of morphological and physiological parameters is a powerful tool for exploring patterns of coadaptation and proposing morphophysiological associations that are not directly predictable from theory. This approach may trigger novel directions for investigating the evolution of form and function, particularly in the context of organismal performance.

Transparent UV-absorbers thin films of zinc oxide: Ceria system synthesized via sol-gel process

Transparent nanostructure ZnO:CeO2 and ZnO thin films to use as solar protector were prepared by non-alkoxide sol-gel process and deposited on boronsilicate glass substrate by dip-coating technique and then heated at 300-500 degrees C. The films were characterized structurally, morphologically and optically by X-ray diffraction (XRD), atomic force microscopy (AFM), field emission gun-scanning electron microscopy (FEG-SEM), scanning electron microscopy (SEM) and UV-Vis transmittance spectroscopy. The coatings presented high transparency in the visible region and excellent absorption in the UV. The band gap of the deposited films was estimated between 3.10 and 3.18 eV. Absorption of the films in the UV was increased by presence of cerium. The results suggest that the materials are promising candidates to use as coating solar protective. (C) 2012 Elsevier B.V. All rights reserved.

Very Intense Distinct Blue and Red Photoluminescence Emission in MgTiO3 Thin Films Prepared by the Polymeric Precursor Method: An Experimental and Theoretical Approach

MgTiO3 (MTO) thin films were prepared by the polymeric precursor method with posterior spin-coating deposition. The films were deposited on Pt(111)/Ti/SiO2/Si(100) substrates and heat treated at 350 degrees C for 2 h and then heat treated at 400, 450, 500, 550, 600, 650 and 700 C for 2 h. The degree of structural order disorder, optical properties, and morphology of the MTO thin films were investigated by X-ray diffraction (XRD), micro-Raman spectroscopy (MR), ultraviolet-visible (UV-vis) absorption spectroscopy, photoluminescence (PL) measurements, and field-emission gun scanning electron microscopy (FEG-SEM) to investigate the morphology. XRD revealed that an increase in the annealing temperature resulted in a structural organization of MTO thin films. First-principles quantum mechanical calculations based on density functional theory (B3LYP level) were employed to study the electronic structure of ordered and disordered asymmetric models. The electronic properties were analyzed, and the relevance of the present theoretical and experimental results was discussed in the light of PL behavior. The presence of localized electronic levels and a charge gradient in the band gap due to a break in the symmetry are responsible for the PL in disordered MTO lattice.

Use of a gold microelectrode for discrimination of gunshot residues

Gunshot residues (GSR) can be used in forensic evaluations to obtain information about the type of gun and ammunition used in a crime. In this work, we present our efforts to develop a promising new method to discriminate the type of gun [four different guns were used: two handguns (0.38 revolver and 0.380 pistol) and two long-barrelled guns (12-calibre pump-action shotgun and 0.38 repeating rifle)] and ammunition (five different types: normal, semi-jacketed, full-jacketed, green, and 3T) used by a suspect. The proposed approach is based on information obtained from cyclic voltammograms recorded in solutions containing GSR collected from the hands of the shooters, using a gold microelectrode; the information was further analysed by non-supervised pattern-recognition methods [(Principal Component Analysis (PCA) and Hierarchical Cluster Analysis (HCA)]. In all cases (gun and ammunition discrimination), good separation among different samples in the score plots and dendrograms was achieved. (C) 2012 Elsevier B.V. All rights reserved.

Management of diabetes mellitus and associated cardiovascular risk factors in Brazil – the Brazilian study on the practice of diabetes care

Abstract Background The Brazilian Study on the Practice of Diabetes Care main objective was to provide an epidemiological profile of individuals with type 1 and 2 diabetes mellitus (DM) in Brazil, concerning therapy and adherence to international guidelines in the medical practice. Methods This observational, cross-sectional, multicenter study collected and analyzed data from individuals with type 1 and 2 DM attending public or private clinics in Brazil. Each investigator included the first 10 patients with type 2 DM who visited his/her office, and the first 5 patients with type 1 DM. Results A total of 1,358 patients were analyzed; 375 (27.6%) had type 1 and 983 (72.4%) had type 2 DM. Most individuals were women, Caucasian, and private health care users. High prevalence rates of hypertension, dyslipidemia and central obesity were observed, particularly in type 2 DM. Only 7.3% and 5.1% of the individuals with types 1 and 2 DM, respectively, had optimal control of blood pressure, plasma glucose and lipids. The absence of hypertension and female sex were associated with better control of type 1 DM and other cardiovascular risk factors. In type 2 DM, older age was also associated with better control. Conclusions Female sex, older age, and absence of hypertension were associated with better metabolic control. An optimal control of plasma glucose and other cardiovascular risk factors are obtained only in a minority of individuals with diabetes. Local numbers, compared to those from other countries are worse.

Polifarmácia entre idosos do Município de São Paulo - Estudo SABE

Foi avaliado o uso de cinco ou mais medicamentos (polifarmácia) e seus fatores associados por idosos do município de São Paulo. Realizou-se estudo transversal de base populacional: Estudo SABE - Saúde, Bem-estar e Envelhecimento, no ano de 2006. A amostra foi composta por 1.115 idosos com 65 anos e mais, que correspondiam a 422.377 indivíduos do Município de São Paulo. Utilizou-se regressão logística múltipla. A prevalência de polifarmácia foi de 36%. Sexo feminino (OR = 1,7; IC 95%: 1,0; 2,9), idade igual ou superior a 75 anos (OR = 1,9; IC 95%: 1,3; 2,7), maior renda (OR = 1,8; IC 95%: 1,2; 2,8), estar trabalhando (OR = 1,8; IC 95%: 1,1; 2,9), auto avaliação de saúde regular (OR = 1,6; IC 95%: 1,1; 2,3) ou ruim (OR = 2,6; IC 95%: 1,4; 4,9), hipertensão (OR = 2,0; IC 95%: 1,4; 2,9), diabetes (OR = 4,1; IC 95%: 2,2; 7,5), doença reumática (OR = 2,3; IC 95%: 1,5; 3,6) e problemas cardíacos (OR = 2,9; IC 95%: 1,9; 4,5) apresentaram associação positiva com polifarmácia. Usar apenas o sistema público de saúde (OR = 0,5; IC 95%: 0,3; 0,7) associou-se inversamente à polifarmácia. Os medicamentos mais utilizados foram os de ação no sistema cardiovascular e trato alimentar e metabolismo. No âmbito da farmacoepidemiologia, o conhecimento dos fatores associados a polifarmácia, como os identificados nesse estudo, pode ser útil para alertar os profissionais da saúde quanto à importância de identificar e monitorar os grupos de idosos mais vulneráveis a polifarmácia.

Effects of cryogenic and stress relief treatments on temper carbide precipitation in AISI D2 tool steel

The effects of cryogenic and stress relief treatments on temper carbide precipitation in the cold work tool steel AISI D2 were studied. For the cryogenic treatment the temperature was −196°C and the holding time was 2, 24 or 30 h. The stress relief heat treatment was carried at 130°C/90 min, when applied. All specimens were compared to a standard thermal cycle. Specimens were studied using metallographic characterisation, X-ray diffraction and thermoelectric power measurements. The metallographic characterisation used SEM (scanning electron microscopy) and SEM-FEG (SEM with field emission gun), besides OM (optical microscopy). No variation in the secondary carbides (micrometre sized) precipitation was found. The temper secondary carbides (nanosized) were found to be more finely dispersed in the matrix of the specimens with cryogenic treatment and without stress relief. The refinement of the temper secondary carbides was attributed to a possible in situ carbide precipitation during tempering.