Lean diesel technology and human health: a case study in six Brazilian metropolitan regions

OBJECTIVE: Due to their toxicity, diesel emissions have been submitted to progressively more restrictive regulations in developed countries. However, in Brazil, the implementation of the Cleaner Diesel Technologies policy (Euro IV standards for vehicles produced in 2009 and low-sulfur diesel with 50 ppm of sulfur) was postponed until 2012 without a comprehensive analysis of the effect of this delay on public health parameters. We aimed to evaluate the impact of the delay in implementing the Cleaner Diesel Technologies policy on health indicators and monetary health costs in Brazil. METHODS: The primary estimator of exposure to air pollution was the concentration of ambient fine particulate matter (particles with aerodynamic diameters, <2.5 mu m, [PM2.5]). This parameter was measured daily in six Brazilian metropolitan areas during 2007-2008. We calculated 1) the projected reduction in the PM2.5 that would have been achieved if the Euro IV standards had been implemented in 2009 and 2) the expected reduction after implementation in 2012. The difference between these two time curves was transformed into health outcomes using previous dose-response curves. The economic valuation was performed based on the DALY (disability-adjusted life years) method. RESULTS: The delay in implementing the Cleaner Diesel Technologies policy will result in an estimated excess of 13,984 deaths up to 2040. Health expenditures are projected to be increased by nearly US$ 11.5 billion for the same period. CONCLUSIONS: The present results indicate that a significant health burden will occur because of the postponement in implementing the Cleaner Diesel Technologies policy. These results also reinforce the concept that health effects must be considered when revising fuel and emission policies.

Conjugated Linoleic Acid Combined with Physical Activity Reduces Body Fat Accumulation But Does Not Modify Lean Body Mass in Male and Female Wistar Rats

Several biological and clinical studies have suggested that conjugated linoleic acid (CLA) prevents body fat accumulation and increases lean body mass. CLA is available as a concentrated dietary supplement and is purported to provide the aforementioned benefits for people who perform physical activity. This study was conducted to evaluate the effect of a CLA-supplemented diet combined with physical activity on the body composition of Wistar rats. Two groups of Wistar rats of both sexes, between 45 and 60 days old, were fed a diet containing 5.5% soybean oil (control group) or a CLA-supplemented diet (0.5% CLA and 5.0% soybean oil) (test group). Half the rats in both groups were assigned to exercise by running on a treadmill. The biochemical and anatomical body compositions were analyzed. In both groups, CLA had no effect on the dietary consumption or the weight of the liver, heart, and lungs. However, it did influence the overall weight gain of exercised male rats and the chemical and anatomical body composition in exercised and sedentary rats of both sexes. The results confirm that a CLA-supplemented diet with and without physical activity reduced body fat accumulation in rats of both sexes. However, there is no evidence of an increase in the lean body mass of the exercised rats.

DXA, bioelectrical impedance, ultrasonography and biometry for the estimation of fat and lean mass in cats during weight loss

Background: Few equations have been developed in veterinary medicine compared to human medicine to predict body composition. The present study was done to evaluate the influence of weight loss on biometry (BIO), bioimpedance analysis (BIA) and ultrasonography (US) in cats, proposing equations to estimate fat (FM) and lean (LM) body mass, as compared to dual energy x-ray absorptiometry (DXA) as the referenced method. For this were used 16 gonadectomized obese cats (8 males and 8 females) in a weight loss program. DXA, BIO, BIA and US were performed in the obese state (T0; obese animals), after 10% of weight loss (T1) and after 20% of weight loss (T2). Stepwise regression was used to analyze the relationship between the dependent variables (FM, LM) determined by DXA and the independent variables obtained by BIO, BIA and US. The better models chosen were evaluated by a simple regression analysis and means predicted vs. determined by DXA were compared to verify the accuracy of the equations. Results: The independent variables determined by BIO, BIA and US that best correlated (p < 0.005) with the dependent variables (FM and LM) were BW (body weight), TC (thoracic circumference), PC (pelvic circumference), R (resistance) and SFLT (subcutaneous fat layer thickness). Using Mallows'Cp statistics, p value and r(2), 19 equations were selected (12 for FM, 7 for LM); however, only 7 equations accurately predicted FM and one LM of cats. Conclusions: The equations with two variables are better to use because they are effective and will be an alternative method to estimate body composition in the clinical routine. For estimated lean mass the equations using body weight associated with biometrics measures can be proposed. For estimated fat mass the equations using body weight associated with bioimpedance analysis can be proposed.

Lean and Fat Mass Loss in Obese Patients Before and After Roux-en-Y Gastric Bypass: A New Application for Ultrasound Technique

This study aims to evaluate the thickness of the femoral quadriceps and biceps brachii and brachialis muscles bilaterally and the adjacent subcutaneous fat in patients undergoing gastric bypass Roux-en-Y before and after surgery, using ultrasound as the diagnostic method of choice. We studied 12 patients undergoing this surgical method preoperatively and during the first, third, and sixth postoperative months. During these periods, patients were evaluated by ultrasound to determine the thickness of subcutaneous adipose tissue and muscle of the upper and lower limbs. Postoperatively, these patients showed a reduction in the thickness of the upper and lower extremities muscle and adipose tissue as compared to their preoperative values. There was a significant difference in the loss of muscle thickness in all postoperative months and in the thickness of fatty tissue in the sixth month after surgery, compared to the preoperative muscle and fatty tissue thickness. Ultrasound can be considered as the diagnostic method of choice when assessment of the fat and lean body mass is required in morbidly obese patients before and after bariatric surgery.

Reference model for implementing an MRP system in a highly diverse component and seasonal lean production environment

Companies are currently choosing to integrate logics and systems to achieve better solutions. These combinations also include companies striving to join the logic of material requirement planning (MRP) system with the systems of lean production. The purpose of this article was to design an MRP as part of the implementation of an enterprise resource planning (ERP) in a company that produces agricultural implements, which has used the lean production system since 1998. This proposal is based on the innovation theory, theory networks, lean production systems, ERP systems and the hybrid production systems, which use both components and MRP systems, as concepts of lean production systems. The analytical approach of innovation networks enables verification of the links and relationships among the companies and departments of the same corporation. The analysis begins with the MRP implementation project carried out in a Brazilian metallurgical company and follows through the operationalisation of the MRP project, until its production stabilisation. The main point is that the MRP system should help the company's operations with regard to its effective agility to respond in time to demand fluctuations, facilitating the creation process and controlling the branch offices in other countries that use components produced in the matrix, hence ensuring more accurate estimates of stockpiles. Consequently, it presents the enterprise knowledge development organisational modelling methodology in order to represent further models (goals, actors and resources, business rules, business process and concepts) that should be included in this MRP implementation process for the new configuration of the production system.

Evaluation of plasmatic MMP-8, MMP-9, TIMP-1 and MPO levels in obese and lean women

Objectives: To compare the plasma concentrations of matrix metalloproteinase (MMP)-9, tissue inhibitor of MMP (TIMP)-1, MMP-8, and myeloperoxidase (MPO) for obese and lean women. Design and methods: We recruited 30 lean and 36 obese women without comorbidities. The MMP-9, TIMP-1, and MMP-8 levels were measured using enzyme-linked immunosorbent assay (ELISA). MPO activity was assessed by a colorimetric assay. Results: Obese women had higher MMP-9 levels and MMP-9:TIMP-1 ratios than lean women. Conversely, the MMP-8 levels and MMP-8:TIMP-1 ratios in the obese women were significantly lower than those in the lean women despite neutrophil activation, which was assessed by MPO activity., Conclusion: We observed that MMP-9 and MMP-8 had distinct profiles, which suggested that these 2 enzymes play different roles in obesity. (C) 2012 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Um modelo de projeto de layout para ambientes job shop com alta variedade de peças baseado nos conceitos da produção enxuta

Segundo Canem e Williamson (1998), o planejamento do layout é importante, pois normalmente representa os maiores e mais caros recursos da organização. Além disso, a localização e disposição física dos equipamentos no chão de fábrica têm impacto em diversos fatores como nível de estoque em processo, tamanho dos lotes de transferência, dificuldade no gerenciamento das atividades, movimentação de pessoas e produtos, entre outros. Portanto, o estudo de conceitos de arranjo físico e o desenvolvimento de modelos de projeto do layout, que visem a otimização dos recursos de produção, são de vital importância na busca pela melhoria dos sistemas produtivos. Neste contexto, este artigo apresenta um novo modelo de projeto de layout, para ambientes job shop com ampla variedade de peças. O modelo foi desenvolvido durante uma pesquisa de doutorado e foi aplicado em algumas empresas do setor metal mecânico. Os resultados obtidos comprovaram a eficiência do modelo projetado. O objetivo do modelo consiste em conduzir a equipe de projeto de layout a desenvolver alternativas de arranjo físico que estejam em consonância com conceitos e princípios da filosofia de produção enxuta. Vale ressaltar novamente que o modelo foi desenvolvido para ambientes com alta variedade de peças, ambientes esses em que, devido à dificuldade em se projetar o arranjo físico, as empresas terminam por adotar o layout funcional, conceito esse de arranjo físico que apresenta sérios problemas como excesso de transporte, altos níveis de estoques em processo, etc.

A livre improvisação musical e a filosofia de Gilles Deleuze

Nos últimos anos a improvisação passou a figurar como um tema cada vez mais presente nos ambientes acadêmicos e hoje é considerada uma importante linha de pesquisa. A nossa reflexão sobre a livre improvisação, além de se apoiar em nossas experiências práticas, tem como uma das suas principais referências a obra do filósofo francês Gilles Deleuze de quem são emprestados conceitos fundamentais tais como, estratificação, território, plano de consistência, molaridade e molecularidade, corpo sem órgãos, ritmo, meios e ritornelo. Neste artigo, originalmente publicado no número 49, vol. 1 da revista Perspectives of New Music, trataremos de mostrar de que forma estes conceitos nos auxiliam a pensar e fundamentar a livre improvisação musical conforme a concebemos em nossos trabalhos práticos e teóricos.

Justiça, razão comunicativa e emancipação social: Filosofia do Direito e Teoria da Justiça a partir do pensamento de Jürgen Habermas

Este artigo trata da interelação entre justiça, razão comunicativa e emancipação social. Ao referir-se à justiça e à injustiça, retorna a um tema de fundamental importância para a história da Filosofia do Direito, sem com isto assumir os riscos das teorias metafísicas da justiça. É a partir da teoria do discurso, de Jürgen Habermas, que as condições e os pressupostos para o desenvolvimento de uma noção de justiça pós-metafísica se torna possível. Investigar a tarefa da Filosofia do Direito, e o desafio do conceito de justiça, são tarefas desdobradas nos estudos e debates envolvidos neste texto.

Brazeability of UNS 32101 and UNS S32304 lean duplex stainless steels

CAPES

Incorporating IT & AT Convergence into Lean Thinking/Six Sigma via the Smarter Operation Transformation (SOT) Methodology

The growing demands for industrial products are imposing an increasingly intense level of competitiveness on the industrial operations. In the meantime, the convergence of information technology (IT) and automation technology (AT) is showing itself to be a tool of great potential for the modernization and improvement of industrial plants. However, for this technology fully to achieve its potential, several obstacles need to be overcome, including the demonstration of the reasoning behind estimations of benefits, investments and risks used to plan the implementation of corporative technology solutions. This article focuses on the evolutionary development of planning and adopting processes of IT & AT convergence. It proposes the incorporation of IT & AT convergence practices into Lean Thinking/Six Sigma, via the method used for planning the convergence of technological activities, known as the Smarter Operation Transformation (SOT) methodology. This article illustrates the SOT methodology through its application in a Brazilian company in the sector of consumer goods. In this application, it is shown that with IT & AT convergence is possible with low investment, in order to reduce the risk of not achieving the goals of key indicators.