Feasibility of Intralaminar, Lateral Mass, or Pedicle Axis Vertebra Screws in Children Under 10 Years of Age: A Tomographic Study

BACKGROUND: There are several techniques for screw insertion in upper cervical spine surgery, and the use of the 3.5-mm screw is usually the standard. However, there is no consensus regarding the feasibility of using these screws in the pediatric population. OBJECTIVE: To determine the measurement of the lamina angle, lamina and pedicle length and thickness, and lateral mass length of the topographic axial view of the axis vertebra of 2- to 10-year-old children to guide the use of surgical screws. METHODS: Seventy-five computed tomography scans from 24- to 120-month-old patients were studied. Measurements were taken in an axial view of C2 and correlated with 2 age groups and both sexes. Statistical analysis was performed with the Student t test. RESULTS: In the 24- to 48-month age group, only 5.5% of the lamina and 8.3% of the pedicles had thicknesses < 3.5 mm. In the 49- to 120-month age group, there were no lamina thickness values < 3.5 mm, and 1.2% of pedicle thicknesses were < 3.5 mm. Both age groups had no lamina and pedicle lengths < 12 mm and no lateral mass lengths > 12 mm. CONCLUSION: In the majority of cases, the use of 3.5-mm lamina and pedicle screws in children is feasible. A base value of 45 degrees for the spinolaminar angle can be adopted as a reference for insertion of screws in the C2 lamina. This information can be particularly useful for decision making during preoperative planning for C1-C2 or craniocervical arthrodesis in children.

Feasibility of Using a Caribbean Screwworm for SIT Campaigns in Brazil

The screwworm, Cochliomyia hominivorax (Coquerel), remains one of the most damaging parasites of livestock in South America, causing millions of dollars in annual losses to producers. Recently, South American countries demonstrated interest in controlling this pest using the Sterile Insect Technique, and a pilot-project was conducted near the Brazil-Uruguay border in 2009. Since molecular studies have suggested the existence of C. hominivorax regional groups, crossing tests were conducted to evaluate mating competitiveness, mating preference and reproductive compatibility between a C. hominivorax strain from the Caribbean (Jamaica-06) and one from Brazil. Mating rates between Jamaican males and Brazilian females ranged between 82 and 100%, and each male inseminated from 3.3 to 3.95 females. Sterile males, regardless of the strain, competed equally against the fertile males for Brazilian females. Jamaican sterile males and Brazilian fertile males mated randomly with fertile or sterile females. No evidence of genetic incompatibility or hybrid dysgenesis was found in the hybridization crosses. Mating barriers should not compromise the use of Jamaican sterile males for Sterile Insect Technique campaigns in Brazil.

Feasibility Study of a Solar Reactor for Phenol Treatment by the Photo-Fenton process in Aqueous Solution

Solar reactors can be attractive in photodegradation processes due to lower electrical energy demand. The performance of a solar reactor for two flow configurations, i.e., plug flow and mixed flow, is compared based on experimental results with a pilot-scale solar reactor. Aqueous solutions of phenol were used as a model for industrial wastewater containing organic contaminants. Batch experiments were carried out under clear sky, resulting in removal rates in the range of 96100?%. The dissolved organic carbon removal rate was simulated by an empirical model based on neural networks, which was adjusted to the experimental data, resulting in a correlation coefficient of 0.9856. This approach enabled to estimate effects of process variables which could not be evaluated from the experiments. Simulations with different reactor configurations indicated relevant aspects for the design of solar reactors.