18 resultados para Biomeccanica muscoloscheletrica, Tibia umana, Deformazioni, Ottimizzazione strutturale
em Biblioteca Digital da Produção Intelectual da Universidade de São Paulo
Resumo:
Osteochondroma is a cartilage capped benign tumor developing mainly at the juxta-epiphyseal region of long bones. The rate of malignant transformation, mainly into chondrosarcoma, is estimated to be less than 1-3%. Transformation into osteosarcoma is very rare and has been reported only thirteen times. There is little information on treatment and outcome. We report the case of a secondary osteosarcoma arising in the left tibia of a 23-year-old male, 10 years after the initial diagnosis of osteochondroma and after two partial resections. Malignant transformation occurred at the stalk and not at the cartilage cap, as would normally be expected. Chromosome banding analysis revealed the karyotype: 46,XY, t(3;13)(q21;q34) [2]/46,XY [18]. Records from additional cases will help determine the parameters that define these rare secondary bone lesions.
Resumo:
Background Split-hand/foot malformation (SHFM)-also known as ectrodactyly-is a congenital disorder characterised by severe malformations of the distal limbs affecting the central rays of hands and/or feet. A distinct entity termed SHFLD presents with SHFM and long bone deficiency. Mouse models suggest that a defect of the central apical ectodermal ridge leads to the phenotype. Although six different loci/mutations (SHFM1-6) have been associated with SHFM, the underlying cause in a large number of cases is still unresolved. Methods High resolution array comparative genomic hybridisation (CGH) was performed in patients with SHFLD to detect copy number changes. Candidate genes were further evaluated for expression and function during limb development by whole mount in situ hybridisation and morpholino knock-down experiments. Results Array CGH showed microduplications on chromosome 17p13.3, a locus previously associated with SHFLD. Detailed analysis of 17 families revealed that this copy number variation serves as a susceptibility factor for a highly variable phenotype with reduced penetrance, particularly in females. Compared to other known causes for SHFLD 17p duplications appear to be the most frequent cause of SHFLD. A similar to 11.8 kb minimal critical region was identified encompassing a single gene, BHLHA9, a putative basic loop helix transcription factor. Whole mount in situ hybridisation showed expression restricted to the limb bud mesenchyme underlying the apical ectodermal ridge in mouse and zebrafish embryos. Knock down of bhlha9 in zebrafish resulted in shortening of the pectoral fins. Conclusions Genomic duplications encompassing BHLHA9 are associated with SHFLD and non-Mendelian inheritance characterised by a high degree of non-penetrance with sex bias. Knock-down of bhlha9 in zebrafish causes severe reduction defects of the pectoral fin, indicating a role for this gene in limb development.
Resumo:
A 6mm segmental defect was performed on the metaphyseal region of the tibia of 12 rabbits and the autoclaved fragmented heterolog cortical bone conserved in glycerin (98%) and methylmethacrylate was used as a bone graft for the reconstruction. The graft was placed in the receptor bed and its integration was evaluated by computed tomography after 30, 60 and 90 days. There was gradual bone graft incorporation in the receptor bed during the time in 100% of the cases. Fragmented cortical bone heterograft and methylmethacrylate was biologically compatible and promotes bone defect reparation without signs of infection, migration and or rejection, featuring a new option of osseous substitute to fill in bone defects.
Resumo:
A major issue for mass rearing of insects concerns sanitary conditions and disease. Microsporidian infection (Nosema sp.) in laboratory colonies of Diatraea saccharalis (Fabr.) (Lepidoptera: Crambidae), used in producing the parasitoid. Cotesia flavipes Cameron (Hymenoptera: Braconidae), is representative of the problems faced by growers and industry. Although C. flavipes has been produced for several years in Brazil for biological control of D. saccharalis, we have only recently observed that the parasitoid becomes infected when developing inside hosts infected with Nosema sp. We assessed the effects of Nosema sp. on C. flavipes, including the ability to locate and select hosts, and evaluated pathogen transmission. Third instar larvae of D. saccharalis were inoculated with Nosema sp. spores at different concentrations and were parasitized when larvae reached fifth instar. Heavily infected D. saccharalis larvae did not support parasitism. Parasitoids that developed in infected D. saccharalis larvae exhibited increased duration of larval and pupal stages, decreased adult longevity and number of offspring, and reduced tibia size compared to parasitoids developing in uninfected D. saccharalis larvae. Infection by Nosema sp. reduced the ability of the C. flavipes parasitoid to distinguish between volatiles released by the sugarcane infested by healthy larvae and pure air. Uninfected parasitoids preferred plants infested with uninfected hosts. But infected C. flavipes did not differentiate between uninfected hosts and those infected with Nosema sp. The pathogen is transmitted from host to parasitoids and parasitoids to hosts. Pathogenic effects of the microsporidium in C. flavipes are sufficiently severe to justify disease management efforts, particularly considering the importance of C. flavipes as a biological control agent in sugarcane. (C) 2012 Elsevier Inc. All rights reserved.
Resumo:
Background: Unstable distal femoral fractures in children are challenging lesions with restricted surgical options for adequate stabilization. Elastic nails have become popular for treating femoral shaft fractures, yet they are still challenging for using in distal fractures. The aim of this study was to test whether end caps (CAP) inserted into the nail extremity improved the mechanical stabilization of a segmental defect at the distal femoral metaphyseal-diaphyseal junction created in an artificial pediatric bone model. Methods: Two 3.5-mm titanium elastic nails (TEN) were introduced intramedullary into pediatric femur models, and a 7.0-mm-thick segmental defect was created at the distal diaphyseal-metaphyseal junction. Nondestructive 4-point bending, axial-bending, and torsion tests were conducted. After this, the end caps were inserted into the external tips of the nails and then screwed into the bone cortex. The mechanical tests were repeated. Stiffness, displacement, and torque were analyzed using the Wilcoxon nonparametric test for paired samples. Results: In the combined axial-bending tests, the TEN + CAP combination was 8.75% stiffer than nails alone (P < 0.01); in torsion tests, the TEN + CAP was 14% stiffer than nails alone (P < 0.01). In contrast, the 4-point bending test did not show differences between the methods (P = 0.91, stiffness; P = 0.51, displacement). Thus, the end caps contributed to an increase in the construct stability for torsion and axial-bending forces but not for 4-point bending forces. Conclusions: These findings indicate that end caps fitted to elastic nails may contribute to the stabilization of fractures that our model mimics (small distal fragment, bone comminution, and distal bone fragment loss).
Resumo:
Objectives: To investigate the effect of Si addition on a nanometer-scale roughness Ca and P implant surfaces in a canine tibia model by biomechanical and histomorphometric evaluations. Material and methods: The implant surfaces comprised a resorbable media CaP microblasted (control) and a CaP resorbable media + silica-boost microblasted (experimental) surfaces. Surfaces were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and optical interferometry (IFM) down to the nanometric level. The animal model involved the bilateral placement of control (n = 24) and experimental surface (n = 24) implants along the proximal tibiae of six dogs, remaining in vivo for 2 or 4 weeks. After euthanization, half of the specimens were torquedto- interface failure, and the other half was subjected to histomorphologic and bone-to-implant contact (BIC) evaluation. Torque and BIC statistical evaluation was performed by the Friedman test at 95% level of significance, and comparisons between groups was performed by the Dunn test. Results: IFM and SEM observations depicted comparable roughness parameters for both implant surfaces on the micrometer and nanometer scales. XPS analysis revealed similar chemical composition, except for the addition of Si on the experimental group. Torque-to-interface failure and BIC mean values showed no significant differences (P = 0.25 and 0.51, respectively) at both 2- and 4-week evaluation points for experimental and control groups. Early bone healing histomorphologic events were similar between groups. Conclusions: The experimental surface resulted in not significantly different biomechanical fixation and BIC relative to control. Both surfaces were biocompatible and osseoconductive.
Resumo:
Reasons for performing study: Alternative methods to evaluate the joint condition in asymptomatic osteochondrosis dissecans (OCD) and other joint diseases may be useful. Objectives: To investigate possible changes in synovial fluid composition that may lead to joint conditions in asymptomatic OCD, in mature horses. Methods: Animals aged >2 years, of different breeds, with OCD in the intermediate ridge of distal tibia, symptomatic or not, were studied. Synovial fluid samples (10 healthy; 11 asymptomatic OCD; 25 symptomatic OCD) were collected by arthroscopy from 29 horses. Glycosaminoglycans (GAGs) were analysed by a combination of agarose gel electrophoresis and enzymatic degradation with specific GAG lyases. The viscosity, white blood cell (WBC) count, protein concentration and hyaluronic acid (HA) molecular weight were also determined. Results: The method used here to analyse synovial fluid GAGs is reliable, reproducible and specific. The main synovial fluid GAGs are HA and chondroitin sulphate (CS), 93% and 7% respectively in normal horses. In symptomatic OCD, the concentrations of both increased (expressed as GAG/urea ratios), but CS increased more. The CS increased also in asymptomatic OCD. An inflammatory reaction was suggested by the increased WBC counts in OCD. The molecular weight of the synovial fluid HA was reduced in OCD, explaining the lower viscosity observed. Conclusions: The increased CS in synovial fluid of OCD joints in mature horses suggests that the synovial fluid CS and the WBC count are good markers of the joint conditions, allowing the identification of pathological phase in joint diseases. Potential relevance: The analysis of synovial fluid GAGs shows that cartilage damage occurs even in asymptomatic OCD, implying that arthroscopic removal of osteochondral fragments should be performed even in asymptomatic OCD.
Resumo:
Beyond the physiological and behavioural, differences in appendage morphology between the workers and queens of Apis mellifera are pre-eminent. The hind legs of workers, which are highly specialized pollinators, deserve special attention. The hind tibia of worker has an expanded bristle-free region used for carrying pollen and propolis, the corbicula. In queens this structure is absent. Although the morphological differences are well characterized, the genetic inputs driving the development of this alternative morphology remain unknown. Leg phenotype determination takes place between the fourth and fifth larval instar and herein we show that the morphogenesis is completed at brown-eyed pupa. Using results from the hybridization of whole genome-based oligonucleotide arrays with RNA samples from hind leg imaginal discs of pre-pupal honeybees of both castes we present a list of 200 differentially expressed genes. Notably, there are castes preferentially expressed cuticular protein genes and members of the P450 family. We also provide results of qPCR analyses determining the developmental transcription profiles of eight selected genes, including abdominal-A, distal-less and ultrabithorax (Ubx), whose roles in leg development have been previously demonstrated in other insect models. Ubx expression in workers hind leg is approximately 25 times higher than in queens. Finally, immunohistochemistry assays show that Ubx localization during hind leg development resembles the bristles localization in the tibia/basitarsus of the adult legs in both castes. Our data strongly indicate that the development of the hind legs diphenism characteristic of this corbiculate species is driven by a set of caste-preferentially expressed genes, such as those encoding cuticular protein genes, P450 and Hox proteins, in response to the naturally different diets offered to honeybees during the larval period.
Resumo:
Within the nutritional context, the supplementation of microminerals in bird food is often made in quantities exceeding those required in the attempt to ensure the proper performance of the animals. The experiments of type dosage x response are very common in the determination of levels of nutrients in optimal food balance and include the use of regression models to achieve this objective. Nevertheless, the regression analysis routine, generally, uses a priori information about a possible relationship between the response variable. The isotonic regression is a method of estimation by least squares that generates estimates which preserves data ordering. In the theory of isotonic regression this information is essential and it is expected to increase fitting efficiency. The objective of this work was to use an isotonic regression methodology, as an alternative way of analyzing data of Zn deposition in tibia of male birds of Hubbard lineage. We considered the models of plateau response of polynomial quadratic and linear exponential forms. In addition to these models, we also proposed the fitting of a logarithmic model to the data and the efficiency of the methodology was evaluated by Monte Carlo simulations, considering different scenarios for the parametric values. The isotonization of the data yielded an improvement in all the fitting quality parameters evaluated. Among the models used, the logarithmic presented estimates of the parameters more consistent with the values reported in literature.
Resumo:
The Chilean genus Nanophareus Roewer, 1929 is revised and three new species are described: N. araucanus sp. nov. (type locality: Parque Nacional La Campana, Valparaiso, Chile); N. bipartitus sp. nov. (type locality: Parque Nacional La Campana, Valparaiso, Chile); N. bosqenublado sp. nov. (type locality: Parque Nacional Fray Jorge, Coquimbo, Chile). The type species, N. palpalis Roewer, 1929, is redescribed and a lectotype is designated. A cladistic analysis was performed using these three new species plus N. palpalis and 14 more laniatorid species, and a data matrix of 72 characters: Seven from the ocularium, 22 from the dorsal scutum, one from the venter, one from the chelicera, eight from the pedipalp, 24 from male legs, and nine from male genitalia. Two equally most parsimonious trees were found (L = 210; C.I. = 0.41; R.I. = 0.51). Nanophareus was recovered as nested within a paraphyletic subfamily Pachylinae. The genus Nanophareus was found to be monophyletic based on the following exclusive synapomorphies: An external row of enlarged tubercles inserted among small ones on lateral margin of the dorsal scutum (innapplicable in N. bosqenublado); the ventro-basal margin of pedipalpal tibia curved 90 degrees in lateral view; and retrolateral seta of the pedipalpal tibia with a socket apically bifid (socket and seta longer than pedipalpal tibia length).
Resumo:
Pterosaurs were widely spread throughout the Mesozoic Era, populating the whole world. Among this great diversity, two groups are commonly found in Brazil: the Anhangueridae and Tapejaridae. These can be mainly identified by cranial synapomorphies. However, because of the fragility of the pterosaur skeleton and rarity of the fossilisation process, the fossils found are usually incomplete, which hampers a proper taxonomic identification of the specimens. The specific proportions of these two groups of pterosaurs were obtained from bibliographic data and measurements of specimens. Eight Anhangueridae-like and seven Tapejaridae were used: Anhanguera piscator, Anhanguera santanae, Anhanguera spielbergi, Araripesaurus castilhoi, Barbosania gracilisrostris and three Anhangueridae sp. indet.; Sinopterus dongi, Tapejara wellnhoferi and five Tapejaridae sp. indet. We find that proportions of the humerus, wing metacarpal, first phalanx of the wing digit, femur and tibia are sufficient to identify partial remains of Araripe pterosaurs. A principal component analysis shows that each clade has different, non-overlapping scores in the studied ratios and these can be used with precision. Specific bone ratios for fast identification of anhanguerids and tapejarids are given, opening a broader way to diagnostic fragmentary bones.
Resumo:
Introduction: The aim of this study was to investigate the temporal modifications in bone mass, bone biomechanical properties and bone morphology in spinal cord injured rats 2, 4 and 6 weeks after a transection. Material and methods: Control animals were randomly distributed into four groups (n = 10 each group): control group (CG) - control animals sacrificed immediately after surgery; spinal cord-injured 2 weeks (2W) - spinal cord-injured animals sacrificed 2 weeks after surgery; spinal cord-injured 4 weeks (4W) - spinal cord-injured animals sacrificed 4 weeks after surgery; spinal cord-injured 6 weeks (6W) - spinal cord-injured animals sacrificed 6 weeks after surgery. Results: Biomechanical properties of the right tibia were determined by a threepoint bending test and injured animals showed a statistically significant decrease in maximal load compared to control animals. The right femur was used for densitometric analysis and bone mineral content of the animals sacrificed 4 and 6 weeks after surgery was significantly higher compared to the control animals and animals sacrificed 2 weeks after surgery. Histopathological and morphological analysis of tibiae revealed intense resorptive areas in the group 2 weeks after injury only. Conclusions: The results of this study show that this rat model is a valuable tool to investigate bone remodeling processes specifically associated with SCI. Taken together, our results suggest that spinal cord injury induced bone loss within 2 weeks after injury in rats.
Resumo:
Analisou-se a distribuição do nervo fibular comum em 30 fetos de equinos, sem raça definida, provenientes do acervo do Laboratório de Anatomia Animal da Faculdade de Medicina Veterinária da Universidade Federal de Uberlândia, que foram injetados e conservados em solução aquosa de formaldeído a 10%. Contatou-se que o referido nervo deriva do isquiático, divide-se em nervos fibulares superficial e profundo, distribuindo-se para os músculos extensores lateral e longo do dedo, fibular terceiro e tibial cranial. Traçando-se uma linha imaginária na região médio-lateral da tuberosidade do osso tíbia, o nervo fibular comum pode ser bloqueado em sua parte proximal, no terço caudal, entre o tendão de inserção do músculo bíceps femoral e a face lateral do músculo gastrocnêmio lateral (terço médio); e o nervo fibular profundo, na parte proximal da tíbia, crânio-distalmente ao fibular comum. O bloqueio do nervo fibular superficial pode ser realizado em duas regiões da tíbia: na proximal, considerando-se a linha imaginária, distalmente ao ponto citado para o fibular comum e caudalmente ao descrito para o fibular profundo; e na distal, na face lateral da articulação tíbio-társica, entre os tendões de inserção dos músculos extensores lateral e longo do dedo.
Resumo:
The deep-water molluscs collected during the expedition MD55 off SE Brazil have been gradually studied in some previous papers. The present one is focused on samples belonging to caenogastropod taxa Xenophoridae Troschel, 1852, Cypraeoidea Rafinesque, 1815, mitriforms and Terebridae Morch, 1852. Regarding the Xenophoridae, Onustus aquitanus n. sp. is a new species, collected off the littoral of Espirito Santo and Rio de Janeiro, Brazil, 430-637 m depth (continental slope). The main characters of the species include the small size (c. 20 mm), the proportionally wide shell, the white colour, the short peripheral flange, the oblique riblets weakly developed and a brown multispiral protoconch. This appears to be the smallest living species of the family, resembling in this aspect fossil species. In respect to the Cypraeoidea, the following results were obtained: family Cypraeidae Rafinesque, 1815: Erosaria acicularis (Gmelin, 1791) and Luria cinerea (Gmelin, 1791) had the deepest record, respectively 607-620 m and 295-940 m, although the samples were all dead, eroded shells. Family Lamellariidae d'Orbigny, 1841: a total of three lots were collected, provisionally identified as Lamellaria spp. as the samples consist of only vestigial shells; possibly each lot represents a different species. Family Pediculariidae Gray, 1853: a sample of Pedicularia tibia Simone, 2005 was found, expanding the range c. 1000 km southwards, from Ceara to Espirito Santo. Family Ovulidae Fleming, 1822: Pseudosimnia lacrima n. sp., collected off Espirito Santo, 607-620 m depth, is described here and is mainly characterised by its strong biconic outline, small size (c. 7 mm), and a thick peripheral callus. Family Triviidae Troschel, 1863: Cleotrivia antillarum (Schilder, 1922) is recorded for the first time as deep as 620 m, and its distribution expanded from Rio Grande do Norte to Espirito Santo; Dolichupis akangus n. sp. with rounded outline and c. 15 transverse ribs; D. pingius n. sp. with the outer lip expanded posteriorly and c. 10 ribs. In respect to the mitriform neogastropods, the following species are emphasised: family Costellariidae MacDonald, 1860: Vexillum sp., 607-620 m depth; Turricostellaria amphissa n. sp., 295 m depth; T. jukyry n. sp.; T. apyrahi n. sp., both 790-1575 m depth; T. ovir n. sp., 1200 m depth; Nodicostellaria crassa (Simone, 1995), 240-600 m depth, with extension northwards of the range up to Espirito Santo; Austromitra decresca n. sp., 60-105 m depth. Family Mitridae Swainson, 1829: Subcancilla joapyra n. sp., 295 m depth; S. cf. straminea (Adams, 1853), 607-620 m depth. Family Volutomitridae Gray, 1854: Microvoluta corona n. sp., 1500-1575 m depth. Family Mitromorphidae Casey, 1904: Mitromorpha sama n. sp., 607-940 m depth; M. mirim n. sp., 60105 m depth. Regarding the conoidean Terebridae, this paper is a complement of a previous study. It deals with a new species Terebra assu Simone n. sp., from the Abrolhos Bank, 295 m depth, characterised by its narrow outline, yellowish colour, weak sculpture on the last whorls, and a proportionally broad, paucispiral protoconch. A second finding of Terebra alagoensis Lima, Tenorio & Barros, 2007 expands the geographic range from Alagoas to north Espirito Santo. A discussion on the systematics of the "complex Terebra doellojuradoi" in South American coast is also provided, highlighting the improbability of synonymy between T. leptapsis Simone, 1999 and T doellojuradoi Carcelles, 1953. Differences in size, sculpture, spire angulation, aperture, and mainly in protoconch, indicate specific separations. The presently studied terebrids belong to the "complex Terebra doellojuradoi", which encompasses closely related, deep-water, small species, possessing a relatively high degree of endemicity.
Resumo:
Preformed structural reinforcements have shown good performance in crash tests, where the great advantage is their weight. These reinforcements are designed with the aim of increasing the rigidity of regions with large deformations, thus stabilising sections of the vehicle that work as load path during impact. The objective of this work is to show the application of structural reinforcements made of polymeric material PA66 in the field of vehicle safety, through finite element simulations. Simulations of frontal impact at 50 km/h and in ODB (offset deformable barrier) at 57 km/h configurations (standards such as ECE R-94 and ECE R-12) were performed in the software LS-DYNA R (R) and MADYMO (R). The simulations showed that the use of polymeric reinforcements leads to a 70% reduction in A-pillar intrusion, a 65% reduction in the displacement of the steering column and a 59% reduction in the deformation in the region of the occupant legs and feet. The level of occupant injuries was analysed by MADYMO (R) software, and a reduction of 23.5% in the chest compression and 80% in the tibia compression were verified. According to the standard, such conditions lead to an improvement in the occupant safety in a vehicle collision event.