Correction of Severe Ptosis with a Silicone Implant Suspensor: 22 Years of Experience

Background: Patients with severe ptosis caused by poor or absent function of the levator muscle but with good frontalis muscle excursion usually benefit from a frontalis sling procedure. This is currently carried out using organic or inorganic material to connect the upper eyelid to the frontalis muscle. Methods: The aim of this study was to evaluate retrospectively 112 patients who underwent frontalis sling procedures between 1989 and 2011 using a preformed silicone implant suspensor to correct severe ptosis. Results: The results obtained using this technique were good or fair in 95.54 percent of the cases and poor in 4.46 percent of the cases. The authors discuss the results of the study and the cases in which the procedure should be indicated and highlight the advantages of the method. Conclusion: The availability of this low-cost sterile device, together with the fact that it is ready to use, requires less invasive surgery, saves time, and is sufficiently versatile to allow adjustments to be made at any time, makes the silicone eyelid sling an attractive choice for correcting ptosis. (Plast. Reconstr. Surg. 129: 453e, 2012.)

Early and One-Year Stroke Case Fatality in Sao Paulo, Brazil: Applying the World Health Organization's Stroke STEPS

Case fatality rate is considered a main determinant of stroke mortality trends. We applied the World Health Organization's Stroke STEPS to identify case fatality rates in a community hospital in Brazil. We evaluated all patients with first-ever stroke seeking acute care at the hospital's emergency ward between April 2006 and December 2008 to verify early and late case fatality according to stroke subtype. We used years of formal education as a surrogate for socioeconomic status. Of 430 first-ever stroke events, 365 (84.9%) were ischemic and 65 (15.1%) were intracerebral hemorrhage. After 1 year, we adjudicated 108 deaths (86 ischemic; 22 hemorrhagic). Age-adjusted case fatality rates for ischemic stroke and intracerebral hemorrhage were 6.0% v 19.8% at 10 days, 10.6% v 22.1% at 28 days, 17.6% v 29.1% at 6 months, and 21.0% v 31.5% at 1 year. Illiteracy or no formal education was a predictor of death at 6 months (odds ratio [OR], 4.31; 95% confidence interval [CI] 1.34-13.91) and 1 year (OR, 4.21; 95% CI, 1.45-12.28) in patients with ischemic stroke, as well as at 6 months (OR, 3.19; 95% CI, 1.17-8.70) and 1 year (OR, 3.30; 95% CI, 1.30-8.45) for all stroke patients. Other variables, including previous cardiovascular risk factors and acute medical care, did not change this association to a statistically significant degree. In conclusion, case fatality, particularly up to 6 months, was higher in hemorrhagic stroke, and lack of formal education was associated with increased stroke mortality.

PBL and B-Learning for Civil Engineering Students in a Transportation Course

The results of a pedagogical strategy implemented at the University of Sao Paulo at Sao Carlos are presented and discussed. The initiative was conducted in a transportation course offered to Civil Engineering students. The approach is a combination of problem-based learning and project-based learning (PBL) and blended-learning (B-learning). Starting in 2006, a different problem was introduced every year. From 2009 on, however, the problem-based learning concept was expanded to project-based learning. The performance of the students was analyzed using the following elements: (1) grades in course activities; (2) answers from a questionnaire designed for course evaluation; and (3) cognitive maps made to assess the effects of PBL through the comparison of the responses provided by the students involved and those not involved in the experiment. The results showed positive aspects of the method, such as a strong involvement of several students with the subject. A gradual increase in the average scores obtained by the students in the project activities (from 6.77 in 2006 to 8.24 in 2009) was concomitant with a better evaluation of these activities and of the course as a whole (90 and 97% of options "Good" or "Very good" in 2009, respectively). A growing interest in the field of transportation engineering as an alternative for further studies was also noticed. DOI: 10.1061/(ASCE)EI.1943-5541.0000115. (C) 2012 American Society of Civil Engineers.

Pathogens of Wild Maned Wolves (Chrysocyon brachyurus) in Brazil

The maned wolf, Chrysocyon brachyurus, is an endangered Neotropical canid that survives at low population densities. Diseases are a potential threat for its conservation but to date have been poorly studied. We performed clinical evaluations and investigated the presence of infectious diseases through serology and coprologic tests on maned wolves from Galheiro Natural Private Reserve, Perdizes City, Minas Gerais State, southeastern Brazil. Fifteen wolves were captured between 2003 and 2008. We found high prevalences of antibody to canine distemper virus (CDV; 13/14), canine parvovirus (CPV; 4/14), canine adenovirus type 2 (13/14), canine coronavirus (5/11), canine parainfluenza virus (5/5), and Toxoplasma gondii (6/8), along with Ancylostomidae eggs in all feces samples. Antibodies against Leishmania sp. were found in one of 10 maned wolves, and all samples were negative for Neospora caniman. Evidence of high exposure to these viral agents was also observed in unvaccinated domestic clogs from neighboring farms. High prevalence of viral agents and parasites such as CDV, CPV, and Ancylostomidae indicates that this population faces considerable risk of outbreaks and chronic debilitating parasites. This is the first report of exposure to canine parainfluenza virus in Neotropical free-ranging wild canids. Our findings highlight that canine pathogens pose a serious hazard to the viability of maned wolves and other wild carnivore populations in the area and emphasize the need for monitoring and protecting wildlife health in remaining fragments of the Cerrado biome.

Exogenous Administration of 15d-PGJ(2)-Loaded Nanocapsules Inhibits Bone Resorption in a Mouse Periodontitis Model

The 15-deoxy-(Delta 12,14)-PG J(2) (15d-PGJ(2)) has demonstrated excellent anti-inflammatory results in different experimental models. It can be used with a polymeric nanostructure system for modified drug release, which can change the therapeutic properties of the active principle, leading to increased stability and slower/prolonged release. The aim of the current study was to test a nano-technological formulation as a carrier for 15d-PGJ(2), and to investigate the immunomodulatory effects of this formulation in a mouse periodontitis model. Poly (D, L-lactide-coglycolide) nanocapsules (NC) were used to encapsulate 15d-PGJ(2). BALB/c mice were infected on days 0, 2, and 4 with Aggregatibacter actinomycetemcomitans and divided into groups (n = 5) that were treated daily during 15 d with 1, 3, or 10 mu g/kg 15d-PGJ(2)-NC. The animals were sacrificed, the submandibular lymph nodes were removed for FACS analysis, and the jaws were analyzed for bone resorption by morphometry. Immunoinflammatory markers in the gingival tissue were analyzed by reverse transcriptase-quantitative PCR, Western blotting, or ELISA. Infected animals treated with the 15d-PGJ(2)-NC presented lower bone resorption than infected animals without treatment (p < 0.05). Furthermore, infected animals treated with 10 mu g/kg 15d-PGJ(2)-NC had a reduction of CD4(+)CD25(+)FOXP3(+) cells and CD4/CD8 ratio in the submandibular lymph node (p < 0.05). Moreover, CD55 was upregulated, whereas RANKL was downregulated in the gingival tissue of the 10 mu g/kg treated group (p < 0.05). Several proinflammatory cytokines were decreased in the group treated with 10 mu g/kg 15d-PGJ(2)-NC, and high amounts of 15d-PGJ(2) were observed in the gingiva. In conclusion, the 15d-PGJ(2)-NC formulation presented immunomodulatory effects, decreasing bone resorption and inflammatory responses in a periodontitis mouse model. The Journal of Immunology, 2012, 189: 1043-1052.

MATHEMATICAL MODELS AND POLYHEDRAL STUDIES FOR INTEGRAL SHEET METAL DESIGN

We deal with the optimization of the production of branched sheet metal products. New forming techniques for sheet metal give rise to a wide variety of possible profiles and possible ways of production. In particular, we show how the problem of producing a given profile geometry can be modeled as a discrete optimization problem. We provide a theoretical analysis of the model in order to improve its solution time. In this context we give the complete convex hull description of some substructures of the underlying polyhedron. Moreover, we introduce a new class of facet-defining inequalities that represent connectivity constraints for the profile and show how these inequalities can be separated in polynomial time. Finally, we present numerical results for various test instances, both real-world and academic examples.

TWO NEW WEAK CONSTRAINT QUALIFICATIONS AND APPLICATIONS

We present two new constraint qualifications (CQs) that are weaker than the recently introduced relaxed constant positive linear dependence (RCPLD) CQ. RCPLD is based on the assumption that many subsets of the gradients of the active constraints preserve positive linear dependence locally. A major open question was to identify the exact set of gradients whose properties had to be preserved locally and that would still work as a CQ. This is done in the first new CQ, which we call the constant rank of the subspace component (CRSC) CQ. This new CQ also preserves many of the good properties of RCPLD, such as local stability and the validity of an error bound. We also introduce an even weaker CQ, called the constant positive generator (CPG), which can replace RCPLD in the analysis of the global convergence of algorithms. We close this work by extending convergence results of algorithms belonging to all the main classes of nonlinear optimization methods: sequential quadratic programming, augmented Lagrangians, interior point algorithms, and inexact restoration.

PESQUISA BIBLIOGRÁFICA NA ÁREA MÉDICA

Este artigo trata da pesquisa bibliográfica no contexto de elaboração, execução e escrita tendo como recomendação a Internet, como fonte de pesquisa, com a finalidade de orientar o pesquisador na utilização de diversas ferramentas de pesquisa e bibliotecas digitais que servirão na recuperação de informações relevantes. Foram abordadas as seguintes etapas: escolha do assunto e delimitação do tema, a busca da terminologia da área, a recuperação exaustiva dos trabalhos, a localização dos trabalhos, a obtenção dos documentos, a leitura, a seleção mais o fichamento dos documentos e, finalmente, a redação do trabalho.